From: Jeff Garzik <jeff@garzik.org>
To: Florian Fainelli <florian@openwrt.org>
Cc: Phil Sutter <n0-1@freewrt.org>, Roel Kluin <roel.kluin@gmail.com>,
jgarzik@redhat.com, linux-ide@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH] pata-rb532-cf: platform_get_irq() failure ignored
Date: Tue, 24 Mar 2009 22:16:43 -0400 [thread overview]
Message-ID: <49C9940B.5050704@garzik.org> (raw)
In-Reply-To: <200903131541.46648.florian@openwrt.org>
Florian Fainelli wrote:
> Hi,
>
> Le Friday 06 March 2009 17:43:18 Phil Sutter, vous avez écrit :
>> Hi,
>>
>> On Thu, Mar 05, 2009 at 07:23:22AM -0500, Jeff Garzik wrote:
>>> Roel Kluin wrote:
>>>> ------------------------------>8-------------8<-------------------------
>>>> -------- platform_get_irq() can return -ENXIO, but since 'irq' is an
>>>> unsigned int, it
>>>> does not show when the IRQ resource wasn't found.
>>>>
>>>> Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
>>>> ---
>>>> diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
>>>> index ebfcda2..fe8178c 100644
>>>> --- a/drivers/ata/pata_rb532_cf.c
>>>> +++ b/drivers/ata/pata_rb532_cf.c
>>>> @@ -173,11 +173,12 @@ static __devinit int
>>>> rb532_pata_driver_probe(struct platform_device *pdev)
>>>> return -EINVAL;
>>>> }
>>>>
>>>> - irq = platform_get_irq(pdev, 0);
>>>> - if (irq <= 0) {
>>>> + ret = platform_get_irq(pdev, 0);
>>>> + if (ret <= 0) {
>>>> dev_err(&pdev->dev, "no IRQ resource found\n");
>>>> return -ENOENT;
>>>> }
>>>> + irq = ret;
>>>>
>>>> gpio = irq_to_gpio(irq);
>>> ACK from Phil or Florian?
>> That's fine for me, though I didn't test it (I managed to break my
>> build-machine somehow, in an attempt to having the mainboard properly
>> grounded).
>>
>> One could simplify the patch by making the variable 'irq' be signed
>> instead of unsigned. This would also prevent "abusing" the variable
>> 'ret'. What do you think?
>
> I agree with this proposal, abusing the ret value is not that good. What about the patch below :
> --
> From: Florian Fainelli <florian@openwrt.org>
> Subject: [PATCH v2] pata-rb532-cf: platform_get_irq() failure ignored
>
> platform_get_irq() can return -ENXIO, but since 'irq' is an
> unsigned int, it does not show when the IRQ resource wasn't found.
> Make irq an int so that we can use a single variable to test the
> platform_get_irq() return value.
>
> Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
> Signed-off-by: Phil Sutter <n0-1@freewrt.org>
> Signed-off-by: Florian Fainelli <florian@openwrt.org>
> --
> diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
> index ebfcda2..da05518 100644
> --- a/drivers/ata/pata_rb532_cf.c
> +++ b/drivers/ata/pata_rb532_cf.c
> @@ -160,7 +160,7 @@ static void rb532_pata_setup_ports(struct ata_host *ah)
>
> static __devinit int rb532_pata_driver_probe(struct platform_device *pdev)
> {
> - unsigned int irq;
> + int irq;
> int gpio;
> struct resource *res;
> struct ata_host *ah;
applied
prev parent reply other threads:[~2009-03-25 2:17 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-03 13:04 [PATCH] pata-rb532-cf: platform_get_irq() failure ignored Roel Kluin
2009-03-05 12:23 ` Jeff Garzik
2009-03-06 16:43 ` Phil Sutter
2009-03-13 14:41 ` Florian Fainelli
2009-03-14 0:51 ` Phil Sutter
2009-03-25 2:16 ` Jeff Garzik [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49C9940B.5050704@garzik.org \
--to=jeff@garzik.org \
--cc=akpm@linux-foundation.org \
--cc=florian@openwrt.org \
--cc=jgarzik@redhat.com \
--cc=linux-ide@vger.kernel.org \
--cc=n0-1@freewrt.org \
--cc=roel.kluin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.