From: Anatolij Gustschin <agust@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 4/7] rtc: add support for 4543 RTC (manufactured by e.g. EPSON)
Date: Fri, 27 Mar 2009 11:33:55 +0100 [thread overview]
Message-ID: <49CCAB93.6030901@denx.de> (raw)
In-Reply-To: <1237998478-18452-5-git-send-email-dzu@denx.de>
Hi Detlev,
some more small style issues, see comments below.
Detlev Zundel wrote:
> diff --git a/drivers/rtc/rtc4543.c b/drivers/rtc/rtc4543.c
> new file mode 100644
> index 0000000..242d9bc
> --- /dev/null
> +++ b/drivers/rtc/rtc4543.c
> @@ -0,0 +1,118 @@
...
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
----------------------------------------------------------^
please, remove space here.
<snip>
> +/*
> + * Note: The acrobatics below is due to the hideously ingenius idea of
> + * the chip designers. As the chip does not allow register
-------------------------^
please, remove space here.
> + * addressing, all values need to be read and written in one go. Sure
-------------------------------------------------------------------^
please, remove space here.
<snip>
> +int rtc_get(struct rtc_time *tm)
> +{
> + int rel = 0;
> + uchar buffer[7];
> +
> + memset(buffer, 0, 7);
> +
> + /* Read 52 bits into our buffer */
> + tws_read(buffer, 52);
> +
> + tm->tm_sec = BCD2BIN( buffer[0] & 0x7F);
> + tm->tm_min = BCD2BIN( buffer[1] & 0x7F);
> + tm->tm_hour = BCD2BIN( buffer[2] & 0x3F);
> + tm->tm_wday = BCD2BIN( buffer[3] & 0x07);
------------------------------^
please, remove space here.
> + tm->tm_mday = BCD2BIN((buffer[3] & 0xF0) >> 4 | (buffer[4] & 0x0F) << 4);
> + tm->tm_mon = BCD2BIN((buffer[4] & 0x30) >> 4 | (buffer[5] & 0x0F) << 4);
> + tm->tm_year = BCD2BIN((buffer[5] & 0xF0) >> 4 | (buffer[6] & 0x0F) << 4) + 2000;
these tree lines above are too long.
...
> diff --git a/include/rtc.h b/include/rtc.h
> index 785fbe3..019c2eb 100644
> --- a/include/rtc.h
> +++ b/include/rtc.h
> @@ -61,4 +61,8 @@ void to_tm (int, struct rtc_time *);
> unsigned long mktime (unsigned int, unsigned int, unsigned int,
> unsigned int, unsigned int, unsigned int);
>
> +uchar rtc_read(uchar reg) __attribute__((weak));
> +void rtc_write(uchar reg, uchar val) __attribute__((weak));
> +
> +
remove one blank line here, please.
Best regards,
Anatolij
next prev parent reply other threads:[~2009-03-27 10:33 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-25 16:27 [U-Boot] [PATCH v2 0/7] Update for inka4x0 plus some new features Detlev Zundel
2009-03-25 16:27 ` [U-Boot] [PATCH v2 1/7] command.c: Expose the core of do_help as _do_help to the rest of u-boot Detlev Zundel
2009-03-25 16:27 ` [U-Boot] [PATCH v2 2/7] mpc5xxx: Add structure definition for several more register blocks Detlev Zundel
2009-03-25 16:27 ` [U-Boot] [PATCH v2 3/7] drivers/twserial: Add protocol driver for "three wire serial" interface Detlev Zundel
2009-03-25 16:27 ` [U-Boot] [PATCH v2 4/7] rtc: add support for 4543 RTC (manufactured by e.g. EPSON) Detlev Zundel
2009-03-25 16:27 ` [U-Boot] [PATCH v2 5/7] inka4x0: Add hardware diagnosis functions for inka4x0 Detlev Zundel
2009-03-25 16:27 ` [U-Boot] [PATCH v2 6/7] inka4x0: Add hardware diagnosis and RTC in configuration Detlev Zundel
2009-03-25 16:27 ` [U-Boot] [PATCH v2 7/7] inka4x0: Use proper accessor macros for memory mapped registers Detlev Zundel
2009-03-27 10:33 ` Anatolij Gustschin [this message]
2009-03-27 10:51 ` [U-Boot] [PATCH v2 4/7] rtc: add support for 4543 RTC (manufactured by e.g. EPSON) Wolfgang Denk
2009-03-27 11:13 ` Detlev Zundel
2009-03-27 12:43 ` Anatolij Gustschin
2009-03-27 12:53 ` Jerry Van Baren
2009-03-27 13:00 ` Detlev Zundel
2009-03-27 16:06 ` Scott Wood
2009-03-25 19:19 ` [U-Boot] [PATCH v2 3/7] drivers/twserial: Add protocol driver for "three wire serial" interface Wolfgang Denk
2009-03-26 9:33 ` Detlev Zundel
2009-03-26 15:23 ` Detlev Zundel
2009-03-27 20:08 ` Wolfgang Denk
2009-03-27 10:02 ` Anatolij Gustschin
2009-03-27 10:33 ` Detlev Zundel
2009-03-27 20:06 ` [U-Boot] [PATCH v2 1/7] command.c: Expose the core of do_help as _do_help to the rest of u-boot Wolfgang Denk
2009-03-25 16:36 ` [U-Boot] [PATCH v2 0/7] Update for inka4x0 plus some new features Detlev Zundel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49CCAB93.6030901@denx.de \
--to=agust@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.