From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <49CCD623.4090907@domain.hid> Date: Fri, 27 Mar 2009 14:35:31 +0100 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <20090327115934.2C40C90005@domain.hid> In-Reply-To: <20090327115934.2C40C90005@domain.hid> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-help] Unable to use Xenomai-Services on ARM/S3C2410 List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: p.vonbrunn@domain.hid Cc: xenomai@xenomai.org p.vonbrunn@domain.hid wrote: > Hi guys, > > I am currently trying to enable Real-Time-Support on my embedded NetDCU10 > board (S3C2410), but with a lot of problems remaining so far... I am using > Kernel 2.6.19 delivered and pre-patched (some board-specific changes) with > my board. This kernel is configured, compiled and working well on the > target. > > After this I tried to get Xenomai running on the machine. I am using > Xenomai 2.3.1 with Adeos-Patch ARM 2.6.19 1.70 (latest), which compiled > well (nucleus, skins etc. built in the kernel) but isn't working > correctly: "dmesg" tells me that the Xenomai-Domain has been registered by > I-pipe and the Xenomai-Services have been started, but I cannot run any > (i.e. trivial_periodic) of the Xenomai-Examples. They fail with "Xenomai > or XENO_OPT_PERVASIVE disabled", but Pervasive is enabled in the .config. > Did I miss anything? > > I thank you for any response and suggestions! > > (Shall I post my shell-script for Xenomai-compilation and/or the > config?) These are really old versions. Could you test if you get the same bug with the latest version? -- Gilles.