All of lore.kernel.org
 help / color / mirror / Atom feed
From: Minkyu Kang <mk7.kang@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] omap3: mmc: mmc2 support
Date: Sat, 28 Mar 2009 14:07:40 +0900	[thread overview]
Message-ID: <49CDB09C.3040904@samsung.com> (raw)

There are 3 MMC/SD/SDIO host controllers inside the device.
This patch will support mmc2 and mmc3(mmc3 have not tested)

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
---
 drivers/mmc/omap3_mmc.c                   |   74 ++++++++++++++++++++++++-----
 include/asm-arm/arch-omap3/mmc_host_def.h |   10 +++-
 include/asm-arm/arch-omap3/omap3.h        |    3 +
 3 files changed, 73 insertions(+), 14 deletions(-)

diff --git a/drivers/mmc/omap3_mmc.c b/drivers/mmc/omap3_mmc.c
index e90db7e..934caff 100644
--- a/drivers/mmc/omap3_mmc.c
+++ b/drivers/mmc/omap3_mmc.c
@@ -51,7 +51,8 @@ const unsigned short mmc_transspeed_val[15][4] = {
 
 mmc_card_data cur_card_data;
 static block_dev_desc_t mmc_blk_dev;
-static hsmmc_t *mmc_base = (hsmmc_t *)OMAP_HSMMC_BASE;
+static hsmmc_t *mmc_base;
+static int curr_device = -1;
 
 block_dev_desc_t *mmc_get_dev(int dev)
 {
@@ -62,10 +63,21 @@ void twl4030_mmc_config(void)
 {
 	unsigned char data;
 
-	data = DEV_GRP_P1;
-	i2c_write(PWRMGT_ADDR_ID4, VMMC1_DEV_GRP, 1, &data, 1);
-	data = VMMC1_VSEL_30;
-	i2c_write(PWRMGT_ADDR_ID4, VMMC1_DEDICATED, 1, &data, 1);
+	switch (curr_device) {
+	case 1:
+		data = DEV_GRP_P1;
+		i2c_write(PWRMGT_ADDR_ID4, VMMC1_DEV_GRP, 1, &data, 1);
+		data = VMMC1_VSEL_30;
+		i2c_write(PWRMGT_ADDR_ID4, VMMC1_DEDICATED, 1, &data, 1);
+		break;
+	case 2:
+	case 3:
+		data = DEV_GRP_P1;
+		i2c_write(PWRMGT_ADDR_ID4, VMMC2_DEV_GRP, 1, &data, 1);
+		data = VMMC2_VSEL_185;
+		i2c_write(PWRMGT_ADDR_ID4, VMMC2_DEDICATED, 1, &data, 1);
+		break;
+	}
 }
 
 unsigned char mmc_board_init(void)
@@ -74,12 +86,21 @@ unsigned char mmc_board_init(void)
 
 	twl4030_mmc_config();
 
-	writel(readl(&t2_base->pbias_lite) | PBIASLITEPWRDNZ1 |
-		PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0,
-		&t2_base->pbias_lite);
+	switch (curr_device) {
+	case 1:
+		writel(readl(&t2_base->pbias_lite) | PBIASLITEPWRDNZ1 |
+			PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0,
+			&t2_base->pbias_lite);
 
-	writel(readl(&t2_base->devconf0) | MMCSDIO1ADPCLKISEL,
-		&t2_base->devconf0);
+		writel(readl(&t2_base->devconf0) | MMCSDIO1ADPCLKISEL,
+			&t2_base->devconf0);
+		break;
+	case 2:
+	case 3:
+		writel(readl(&t2_base->devconf1) | MMCSDIO2ADPCLKISEL,
+			&t2_base->devconf1);
+		break;
+	}
 
 	return 1;
 }
@@ -525,8 +546,37 @@ unsigned long mmc_bread(int dev_num, unsigned long blknr, lbaint_t blkcnt,
 	return 1;
 }
 
-int mmc_legacy_init(int verbose)
+int mmc_set_dev(int dev)
+{
+	if (dev < 0) {
+		printf("unknwon device\n");
+		return 1;
+	} else {
+		switch (dev) {
+		case 1:
+			mmc_base = (hsmmc_t *)OMAP_HSMMC_BASE_MMC1;
+			break;
+		case 2:
+			mmc_base = (hsmmc_t *)OMAP_HSMMC_BASE_MMC2;
+			break;
+		case 3:
+			mmc_base = (hsmmc_t *)OMAP_HSMMC_BASE_MMC3;
+			break;
+		default:
+			printf("unknwon device\n");
+			return 1;
+		}
+		curr_device = dev;
+	}
+
+	return 0;
+}
+
+int mmc_legacy_init(int dev)
 {
+	if (mmc_set_dev(dev) != 0)
+		return 1;
+
 	if (configure_mmc(&cur_card_data) != 1)
 		return 1;
 
@@ -538,7 +588,7 @@ int mmc_legacy_init(int verbose)
 
 	/* FIXME fill in the correct size (is set to 32MByte) */
 	mmc_blk_dev.blksz = MMCSD_SECTOR_SIZE;
-	mmc_blk_dev.lba = 0x10000;
+	mmc_blk_dev.lba = cur_card_data.size;
 	mmc_blk_dev.removable = 0;
 	mmc_blk_dev.block_read = mmc_bread;
 
diff --git a/include/asm-arm/arch-omap3/mmc_host_def.h b/include/asm-arm/arch-omap3/mmc_host_def.h
index aa751c9..8b234ef 100644
--- a/include/asm-arm/arch-omap3/mmc_host_def.h
+++ b/include/asm-arm/arch-omap3/mmc_host_def.h
@@ -31,7 +31,9 @@
 typedef struct t2 {
 	unsigned char res1[0x274];
 	unsigned int devconf0;		/* 0x274 */
-	unsigned char res2[0x2A8];
+	unsigned char res2[0x60];
+	unsigned int devconf1;		/* 0x2D8 */
+	unsigned char res3[0x244];
 	unsigned int pbias_lite;	/* 0x520 */
 } t2_t;
 
@@ -41,10 +43,14 @@ typedef struct t2 {
 #define PBIASSPEEDCTRL0			(1 << 2)
 #define PBIASLITEPWRDNZ1		(1 << 9)
 
+#define MMCSDIO2ADPCLKISEL		(1 << 6)
+
 /*
  * OMAP HSMMC register definitions
  */
-#define OMAP_HSMMC_BASE		0x4809C000
+#define OMAP_HSMMC_BASE_MMC1	0x4809C000
+#define OMAP_HSMMC_BASE_MMC2	0x480B4000
+#define OMAP_HSMMC_BASE_MMC3	0x480AD000
 
 typedef struct hsmmc {
 	unsigned char res1[0x10];
diff --git a/include/asm-arm/arch-omap3/omap3.h b/include/asm-arm/arch-omap3/omap3.h
index 8c9656f..b5b5def 100644
--- a/include/asm-arm/arch-omap3/omap3.h
+++ b/include/asm-arm/arch-omap3/omap3.h
@@ -206,6 +206,8 @@ typedef struct gpio {
 #define VAUX3_DEDICATED		0x7D
 #define VMMC1_DEV_GRP		0x82
 #define VMMC1_DEDICATED		0x85
+#define VMMC2_DEV_GRP		0x86
+#define VMMC2_DEDICATED		0x89
 #define VPLL2_DEV_GRP		0x8E
 #define VPLL2_DEDICATED		0x91
 #define VDAC_DEV_GRP		0x96
@@ -219,5 +221,6 @@ typedef struct gpio {
 #define VPLL2_VSEL_18		0x05
 #define VDAC_VSEL_18		0x03
 #define VMMC1_VSEL_30		0x02
+#define VMMC2_VSEL_185		0x06
 
 #endif

             reply	other threads:[~2009-03-28  5:07 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-28  5:07 Minkyu Kang [this message]
2009-04-01  9:27 ` [U-Boot] [PATCH] omap3: mmc: mmc2 support Jean-Christophe PLAGNIOL-VILLARD
2009-04-02 10:19   ` Minkyu Kang
  -- strict thread matches above, loose matches on Subject: below --
2009-03-27 15:17 Minkyu Kang
2009-03-26 10:47 Minkyu Kang
2009-03-26 23:16 ` Dirk Behme
2009-03-27 19:01   ` Wolfgang Denk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49CDB09C.3040904@samsung.com \
    --to=mk7.kang@samsung.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.