From mboxrd@z Thu Jan 1 00:00:00 1970 Sender: Kai Timmer Message-ID: <49D2300C.9010206@kait.de> Date: Tue, 31 Mar 2009 17:00:28 +0200 From: Kai Timmer MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: 7bit Subject: [B.A.T.M.A.N.] Batman-adv nodes do not recieve OGMs Reply-To: The list for a Better Approach To Mobile Ad-hoc Networking List-Id: The list for a Better Approach To Mobile Ad-hoc Networking List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: b.a.t.m.a.n@open-mesh.net Hello, i have a problem using batman-adv. At the moment i use v0.1, but i had the same problem when trying the svn version 1241. All the nodes send their ogm, but none does recieve any of these. What i did on all nodes is: iwconfig $wlaninterface essid batman mode ad-hoc and then echo "$wlaninterface" > /proc/net/batman-adv/interfaces echo 15 > /proc/net/batman-adv/log_level cat /proc/net/batman-adv/log after that shows somethink like this: Adding interface: ath0 Can't activate module: the primary interface is not active Sending own packet (originator 00:18:84:14:48:e5, seqno 1, TTL 50) on interface ath0 [00:18:84:14:48:e5] Sending own packet (originator 00:18:84:14:48:e5, seqno 2, TTL 50) on interface ath0 [00:18:84:14:48:e5] Sending own packet (originator 00:18:84:14:48:e5, seqno 3, TTL 50) on interface ath0 [00:18:84:14:48:e5] I also tried to set the channel on all nodes, but with no effect. Maybe someone can tell me what i do wrong. Thank you, -- Kai Timmer Email : email@kait.de Jabber: kai@kait.de Blog: http://blog.kaitimmer.de