From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jiri Horky Date: Sun, 05 Apr 2009 07:55:28 +0000 Subject: Re: [lm-sensors] Intel DG45FC Message-Id: <49D863F0.3000803@gmail.com> List-Id: References: <7bccedf10809181658o18aa47bbt46480ca2a67b1ac9@mail.gmail.com> In-Reply-To: <7bccedf10809181658o18aa47bbt46480ca2a67b1ac9@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hi all, I too have Intel DG45FC board and I am very interested in getting sensors working (and even more in PWM control of board, I am able to monitor temperatures with external thermometer). From what I understand, it would require "QST SDK" from Intel to be realeased, am I right (does that apply to PWM control too?) ? See [1]. And to answer Jean Delvare question. I have tried mentioned sensors-detect and the output was: Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel Core family thermal sensor' (confidence: 9) Driver `lm85': * Bus `SMBus I801 adapter at f000' Busdriver `i2c_i801', I2C address 0x2e Chip `lm85' (confidence: 6) Jiri Horky [1] http://software.intel.com/en-us/forums/manageability-software-development/topic/54851/ > OK, thanks for the information. This confirms my guess that devices > without the hardware monitoring block have revision ID 0x91. Please > give a try to the latest version of sensors-detect: > http://www.lm-sensors.org/svn/lm-sensors/trunk/prog/detect/sensors-detect > > It should detect a WPCD376I/377I and tell you it doesn't have hardware > monitoring features. > > -- > Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors