From: Arnd Hannemann <hannemann@nets.rwth-aachen.de>
To: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Arnd Hannemann <Arnd.Hannemann@nets.rwth-aachen.de>,
LKML <linux-kernel@vger.kernel.org>,
"linux-ide@vger.kernel.org" <linux-ide@vger.kernel.org>
Subject: Re: 2.6.29.1 BUG: unable to handle kernel NULL pointer dereference at (null)
Date: Mon, 06 Apr 2009 20:51:05 +0200 [thread overview]
Message-ID: <49DA4F19.3000007@nets.rwth-aachen.de> (raw)
In-Reply-To: <49DA4AB0.10505@ru.mvista.com>
[-- Attachment #1: Type: text/plain, Size: 3692 bytes --]
Sergei Shtylyov schrieb:
> Arnd Hannemann wrote:
>
>
>> perhaps cs5536 is broken?
>>
>
> Yes, it is.
>
>
>> This is with one CF card present on ALIX 2c2:
>>
>
>
>> [ 2.857215] Uniform Multi-Platform E-IDE driver
>> [ 2.871238] cs5536 0000:00:0f.2: IDE controller (0x1022:0x209a rev 0x01)
>> [ 2.891486] cs5536 0000:00:0f.2: not 100% native mode: will probe
>> irqs later
>> [ 2.912718] BUG: unable to handle kernel NULL pointer dereference at
>> (null)
>> [ 2.933857] IP: [<(null)>] (null)
>> [ 2.944014] *pde = 00000000
>> [ 2.952788] Oops: 0000 [#1]
>> [ 2.956215] last sysfs file:
>> [ 2.956215] Modules linked in:
>> [ 2.956215]
>> [ 2.956215] Pid: 1, comm: swapper Not tainted (2.6.29.1-ah #1)
>> [ 2.956215] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0
>> [ 2.956215] EIP is at 0x0
>> [ 2.956215] EAX: ce925400 EBX: ce925400 ECX: ce925400 EDX: c0372ebc
>> [ 2.956215] ESI: c0372dec EDI: cf4aa858 EBP: cf416d14 ESP: cf416d04
>> [ 2.956215] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
>> [ 2.956215] Process swapper (pid: 1, ti=cf416000 task=cf41fb40
>> task.ti=cf416)
>> [ 2.956215] Stack:
>> [ 2.956215] c027815f ce925400 c0372dec 0000ff00 cf416d2c c0278722
>> cf4aa800 0
>> [ 2.956215] c0372dec ce92543c cf416d6c c0276a9e cf416d7c cf416e7c
>> c0372dec 0
>> [ 2.956215] ce925400 00000000 c03e0c48 cf4aa8c0 01000005 c0372dec
>> 00000000 0
>> [ 2.956215] Call Trace:
>> [ 2.956215] [<c027815f>] ? ide_pci_check_simplex+0x4e/0x83
>> [ 2.956215] [<c0278722>] ? ide_hwif_setup_dma+0x63/0xcd
>> [ 2.956215] [<c0276a9e>] ? ide_host_register+0x169/0x52f
>> [ 2.956215] [<c027884a>] ? ide_pci_init_one+0xbe/0xd5
>> [ 2.956215] [<c01133a2>] ? update_curr+0x60/0x93
>> [ 2.956215] [<c02395bf>] ? idr_get_empty_slot+0x132/0x1f5
>> [ 2.956215] [<c02962a4>] ? raw_pci_read+0x4c/0x57
>> [ 2.956215] [<c0296392>] ? pci_read+0x1d/0x23
>> [ 2.956215] [<c0242a7d>] ? pci_bus_read_config_dword+0x2c/0x44
>> [ 2.956215] [<c027a219>] ? cs5536_init_one+0x4f/0x54
>> [ 2.956215] [<c024648d>] ? local_pci_probe+0xe/0x10
>> [ 2.956215] [<c0246599>] ? pci_device_probe+0x4b/0x69
>> [ 2.956215] [<c0269a05>] ? driver_probe_device+0x9b/0x112
>> [ 2.956215] [<c0269ac8>] ? __driver_attach+0x4c/0x6b
>> [ 2.956215] [<c0269101>] ? bus_for_each_dev+0x36/0x57
>> [ 2.956215] [<c02698af>] ? driver_attach+0x14/0x16
>> [ 2.956215] [<c0269a7c>] ? __driver_attach+0x0/0x6b
>> [ 2.956215] [<c026958b>] ? bus_add_driver+0x97/0x1a7
>> [ 2.956215] [<c0269c63>] ? driver_register+0x71/0xcd
>> [ 2.956215] [<c024674d>] ? __pci_register_driver+0x2e/0x5d
>> [ 2.956215] [<c0452069>] ? cs5536_init+0x14/0x16
>> [ 2.956215] [<c0101049>] ? _stext+0x49/0x10b
>> [ 2.956215] [<c0452055>] ? cs5536_init+0x0/0x16
>> [ 2.956215] [<c0182200>] ? proc_create_data+0x8a/0x8d
>> [ 2.956215] [<c013a16c>] ? register_irq_proc+0x6a/0x83
>> [ 2.956215] [<c043e6d0>] ? kernel_init+0x6d/0xbb
>> [ 2.956215] [<c043e663>] ? kernel_init+0x0/0xbb
>> [ 2.956215] [<c010319f>] ? kernel_thread_helper+0x7/0x10
>> [ 2.956215] Code: Bad EIP value.
>> [ 2.956215] EIP: [<00000000>] 0x0 SS:ESP 0068:cf416d04
>> [ 3.638455] ---[ end trace f6947cc280ce4929 ]---
>> [ 3.652402] Kernel panic - not syncing: Attempted to kill init!
>>
>
> The dma_sff_read_status() method isn't defined in the driver for some
> reason. Try the attached patch please.
>
The patch didn't apply to 2.6.29.1, however the proposed change worked.
Thanks for the quick answer!
>
>> Best regards,
>> Arnd
>>
>
> MBR, Sergei
>
Best regards,
Arnd
[-- Attachment #2: cs5536-define-dma_sff_read_status_2.6.29.1.patch --]
[-- Type: text/x-patch, Size: 393 bytes --]
--- linux-2.6.29.1.orig/drivers/ide/cs5536.c 2009-04-02 22:55:27.000000000 +0200
+++ linux-2.6.29.1/drivers/ide/cs5536.c 2009-04-06 20:41:15.000000000 +0200
@@ -237,6 +237,7 @@
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
.dma_timeout = ide_dma_timeout,
+ .dma_sff_read_status = ide_dma_sff_read_status,
};
static const struct ide_port_info cs5536_info = {
prev parent reply other threads:[~2009-04-06 18:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-06 18:11 2.6.29.1 BUG: unable to handle kernel NULL pointer dereference at (null) Arnd Hannemann
2009-04-06 18:32 ` Sergei Shtylyov
2009-04-06 18:51 ` Arnd Hannemann [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49DA4F19.3000007@nets.rwth-aachen.de \
--to=hannemann@nets.rwth-aachen.de \
--cc=Arnd.Hannemann@nets.rwth-aachen.de \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sshtylyov@ru.mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.