From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jerry Geis Subject: Gigabyte ALC889A Function ID: 0x01 Date: Wed, 15 Apr 2009 10:00:33 -0400 Message-ID: <49E5E881.5020507@pagestation.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from unifiedpaging.messagenetsystems.com (mail.emergencycommunicationsystems.com [24.123.23.170]) by alsa0.perex.cz (Postfix) with ESMTP id B8F7E1038CF for ; Wed, 15 Apr 2009 16:00:34 +0200 (CEST) Received: from devcentos5x64.msgnet.com (devcentos5x64 [192.168.1.8]) by unifiedpaging.messagenetsystems.com (8.13.1/8.13.1) with ESMTP id n3FE0VY8009241 for ; Wed, 15 Apr 2009 10:00:31 -0400 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org I am using the gigabyte MA78GM-US2H motherboard. it has the ALC889A audio. I am trying 1.0.19 and audio works out the analog back port but not over HDMI. Codec: Realtek ALC889A Address: 0 Function Id: 0x1 <--------------------------------- this is different Vendor Id: 0x10ec0885 Subsystem Id: 0x1458a002 Revision Id: 0x100101 No Modem Function Group found Default PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=2, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x03 [Audio Output] wcaps 0x11: Stereo I have been looking but havent found a solution yet. I tried grabbing the snapshot tar ball for today but I get errors on the compile. I had a similiar motherboard but it does not report Function ID: 01 : - HDMI audio on this board works correctly. Codec: Realtek ALC889A Address: 0 Vendor Id: 0x10ec0885 Subsystem Id: 0x1458a002 Revision Id: 0x100101 No Modem Function Group found Default PCM: rates [0x560]: 44100 48000 96000 192000 Any thoughts???? Jerry