Re: Interruption on PCI Bus

[Simon Desfarges <simon.desfarges-s/S/64wAxt+H1Tvi1vFFB9BPR1lH4CV8@public.gmane.org>]

Grant Likely a écrit :
> On Thu, Apr 16, 2009 at 2:50 AM, Mitch Bradley <wmb-D5eQfiDGL7eakBO8gow8eQ@public.gmane.org> wrote:
>> Sorry for being so vague.  As the person who originally devised this
>> interrupt tree stuff, I'm pretty sure about the intention, but much less
>> sure about what specific versions of Linux and U-Boot actually do.
>>  Hopefully someone else can give you a definitive answer about that.
> 
> U-Boot doesn't really do anything with interrupts.  It usually just
> polls everything.
> 
> Linux arch/powerpc does walk the device tree to get irq routing and
> resolve to a Linux-internal virtual IRQ number.  I'm pretty sure that
> the IRQ registers are normally ignored unless something goes wrong
> with parsing the tree.  See arch/powerpc/kernel/pci-common.c and
> search for of_irq_map_pci().
> 
> g.
> 
OK, thank you very much for your answers, you are very helpful for a 
newbie like me.

So, if I understood well, of_irq_map_pci() maps the IRQs by reading the 
device tree and doesn't use the irq_line register (if there is nothing 
wrong) of the PCI device and doesn't initialize it. My problem is PCI 
device drivers are using this field (I have read this in the ldd book). 
I think I have missed something because it seems to work well like this.

Regards,
Simon Desfarges