From: prathika <prathika@deeopl.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] UART2 Console in u-boot
Date: Fri, 17 Apr 2009 13:58:08 +0530 [thread overview]
Message-ID: <49E83D98.6060400@deeopl.com> (raw)
hi all,
this might a little silly question. but still wanted to confirm with you
all.
i have a board with PPC440 EP where I load u-boot configuring for
yosemite as my design is similar to that.
I want the console to configured for the UART's second channel.
Is it enough if I change the base address to second channel..Because
there are UART base address defined only for UART0 and UART1 even if
CONFIG_SERIAL_MULTI is defined.
Some one please clarify my doubt.
Thanks & Regards,
Prathika R
next reply other threads:[~2009-04-17 8:28 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-17 8:28 prathika [this message]
2009-04-17 9:07 ` [U-Boot] UART2 Console in u-boot Stefan Roese
2009-04-17 9:27 ` prathika
2009-04-17 9:37 ` Stefan Roese
2009-04-20 3:50 ` prathika
2009-04-25 4:10 ` prathika
2009-04-25 6:31 ` prathika
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49E83D98.6060400@deeopl.com \
--to=prathika@deeopl.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.