From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
To: linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Subject: [PATCH 1/2] pci, msi: Remove unused/obsolete macros and definitions
Date: Mon, 20 Apr 2009 10:54:52 +0900 [thread overview]
Message-ID: <49EBD5EC.4040905@jp.fujitsu.com> (raw)
Impact: cleanup, spec compliance
This patch does:
- Remove unused msi/msix_enable/disable macros.
User should use msi/msix_set_enable() functions instead.
- Remove unused msix_mask/unmask/pending macros.
These macros are useless because they are not based on any of
the PCI Local Bus Specifications properly.
It seems that they were written based on a draft of PCI spec,
and that the draft was the MSI-X ECN that underwent membership
review in September 2002.
(* In the draft, the size of a entry in MSI-X table was 64bit,
containing 32bit message data and DWORD aligned lower address
plus a pending bit and a mask bit.(30+1+1bit) The higher
address was placed in MSI-X capability structure and shared
by all entries.)
- Remove PCI_MSIX_FLAGS_BITMASK.
This definition also come from the draft ECN.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
---
drivers/pci/msi.h | 8 +-------
include/linux/pci_regs.h | 1 -
2 files changed, 1 insertions(+), 8 deletions(-)
diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h
index 71f4df2..4fed592 100644
--- a/drivers/pci/msi.h
+++ b/drivers/pci/msi.h
@@ -19,18 +19,12 @@
( (is64bit == 1) ? base+PCI_MSI_DATA_64 : base+PCI_MSI_DATA_32 )
#define msi_mask_bits_reg(base, is64bit) \
( (is64bit == 1) ? base+PCI_MSI_MASK_BIT : base+PCI_MSI_MASK_BIT-4)
-#define msi_disable(control) control &= ~PCI_MSI_FLAGS_ENABLE
#define is_64bit_address(control) (!!(control & PCI_MSI_FLAGS_64BIT))
#define is_mask_bit_support(control) (!!(control & PCI_MSI_FLAGS_MASKBIT))
#define msix_table_offset_reg(base) (base + 0x04)
#define msix_pba_offset_reg(base) (base + 0x08)
-#define msix_enable(control) control |= PCI_MSIX_FLAGS_ENABLE
-#define msix_disable(control) control &= ~PCI_MSIX_FLAGS_ENABLE
#define msix_table_size(control) ((control & PCI_MSIX_FLAGS_QSIZE)+1)
-#define multi_msix_capable msix_table_size
-#define msix_unmask(address) (address & ~PCI_MSIX_FLAGS_BITMASK)
-#define msix_mask(address) (address | PCI_MSIX_FLAGS_BITMASK)
-#define msix_is_pending(address) (address & PCI_MSIX_FLAGS_PENDMASK)
+#define multi_msix_capable(control) msix_table_size((control))
#endif /* MSI_H */
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index e4d08c1..ad57aa8 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -304,7 +304,6 @@
#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
#define PCI_MSIX_FLAGS_MASKALL (1 << 14)
#define PCI_MSIX_FLAGS_BIRMASK (7 << 0)
-#define PCI_MSIX_FLAGS_BITMASK (1 << 0)
/* CompactPCI Hotswap Register */
--
1.6.2.2
next reply other threads:[~2009-04-20 1:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-20 1:54 Hidetoshi Seto [this message]
2009-04-20 11:06 ` [PATCH 1/2] pci, msi: Remove unused/obsolete macros and definitions Matthew Wilcox
2009-05-05 18:37 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49EBD5EC.4040905@jp.fujitsu.com \
--to=seto.hidetoshi@jp.fujitsu.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.