From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mta1.srv.hcvlny.cv.net ([167.206.4.196]:35401 "EHLO mta1.srv.hcvlny.cv.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754628AbZDTVwt (ORCPT ); Mon, 20 Apr 2009 17:52:49 -0400 Received: from steven-toths-macbook-pro.local (ool-45721e5a.dyn.optonline.net [69.114.30.90]) by mta1.srv.hcvlny.cv.net (Sun Java System Messaging Server 6.2-8.04 (built Feb 28 2007)) with ESMTP id <0KIF0042563NBZT0@mta1.srv.hcvlny.cv.net> for linux-media@vger.kernel.org; Mon, 20 Apr 2009 17:52:36 -0400 (EDT) Date: Mon, 20 Apr 2009 17:52:35 -0400 From: Steven Toth Subject: Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA) In-reply-to: <1240259904.5388.178.camel@mountainboyzlinux0> To: pghben@yahoo.com Cc: "linux-media@vger.kernel.org" , Mauro Carvalho Chehab , Steven Toth Message-id: <49ECEEA3.6010203@linuxtv.org> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7BIT References: <23cedc300904170207w74f50fc1v3858b663de61094c@mail.gmail.com> <49E9C4EA.30706@linuxtv.org> <49EC9A08.50603@linuxtv.org> <1240245715.5388.126.camel@mountainboyzlinux0> <49ECA8DD.9090708@linuxtv.org> <1240249684.5388.146.camel@mountainboyzlinux0> <49ECBCF0.3060806@linuxtv.org> <1240255677.5388.153.camel@mountainboyzlinux0> <49ECD553.9090707@linuxtv.org> <1240259904.5388.178.camel@mountainboyzlinux0> Sender: linux-media-owner@vger.kernel.org List-ID: Benster & Jeremy wrote: > On Mon, 2009-04-20 at 16:04 -0400, Steven Toth wrote: >>>> So, under MCE find a major network ABC, NBC or CBS that works perfectly for you >>>> then locate the RF channel on antenna web.org. >>> These all come in fine on mce. >>> >>> KDKA-DT 2.1 25 >>> WTAE-DT 4.1 51 >>> WQED-DT 13.1 38 >> (Rule #2, always CC the mailing list. Don't drop them off, even by accident. An >> honest mistake on your part so I've added them back in.) >> >> Modify your $HOME/.azap/channels.conf to look like this: >> >> ch25:539000000:8VSB:65:68:4 >> ch38:614000000:8VSB:65:68:4 >> ch51:695000000:8VSB:65:68:4 >> >> The use the following command to tune ch25: >> >> azap -r ch25 >> >> What happens next? >> >> - Steve >> > No indicator light - I know this is probably just a bit set somewhere > that turns on/off the light and has nothing to do with actual operation > of the card, but thought I would mention it. > > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > tuning to 539000000 Hz > video pid 0x0041, audio pid 0x0044 > status 00 | signal 7fe2 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 008c | snr 0082 | ber 00000000 | unc 00000000 | > ....last line repeats indefinitely.....I hit ^c. > > tried a second time - now all lines match last line and again I hit ^c. > also the same as the second line for the other two channels. > > Something I forgot to mention, if you remove the card with the system > running linux it results in a freeze with a blinking caps lock led (btw > it's a hp dv9208nr laptop). It's ok under windows (32bit). I am running > 64 bit linux. > > If I insert the card after booting linux without it, the lines > referencing the card do not get added to dmesg's output, and the /dev > entries do not appear. udevd issue or driver? Hot swap is not supported, always cold boot with the device inserted. > > I don't have any other expresscards that I could plug-in to see if hot > swap works on other things. > > Ben > oops on the reply list. It has been a long time since I wrote to a mail > list. I did catch one thing before you needed to tell me - i switched to > plain text from html mail. I tested a 77001 D3C0 rev and it doesn't locked for me either. This used to work. Either the xc3028 or s5h1409 driver has a regression. End result: Bug, broken. Thanks for highlighting this. - Steve