From: Niel Lambrechts <niel.lambrechts@gmail.com>
To: "linux.kernel" <linux-kernel@vger.kernel.org>
Subject: 2.6.30-rc2: WARNING at i915_gem.c for i915_gem_idle
Date: Tue, 21 Apr 2009 23:35:26 +0200 [thread overview]
Message-ID: <49EE3C1E.8070208@gmail.com> (raw)
Hi there,
I get the following when I switch from runlevel 5 to 3 using the latest
git kernel. I haven't noticed any other side-effects and X started up
fine, but I'm assuming something is misbehaving and the trace might be
meaningful to someone. I also frequently still notice this "*ERROR*
trying to get vblank count for disabled pipe 0" message when I exit
Xorg. (BTW, I am still using EXA acceleration due to issues with UXA+KMS).
The hardware is an Lenovo Thinkpad W500 with:
00:02.1 Display controller: Intel Corporation Mobile 4 Series
Chipset Integrated Graphics Controller (rev 07)
messages:
Apr 21 00:44:00 linux-7vph init: Switching to runlevel: 3
Apr 21 00:44:06 linux-7vph kernel: ------------[ cut here ]------------
Apr 21 00:44:06 linux-7vph kernel: WARNING: at
drivers/gpu/drm/i915/i915_gem.c:3823 i915_gem_idle+0x17a/0x28c [i915]()
Apr 21 00:44:06 linux-7vph kernel: Hardware name: 40622XG
Apr 21 00:44:06 linux-7vph kernel: Modules linked in: iwlagn rndis_wlan
rndis_host cdc_ether usbnet cdc_acm mii usbhid hid cpufreq_stats tun
i915 drm i2c_algo_bit af_packet ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG
xt_limit snd_pcm_oss snd_mixer_oss snd_seq binfmt_misc ip6t_REJECT
nf_conntrack_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state
iptable_raw iptable_filter ip6table_mangle cpufreq_conservative
cpufreq_userspace nf_conntrack_netbios_ns cpufreq_powersave
nf_conntrack_ipv4 acpi_cpufreq nf_conntrack nf_defrag_ipv4 ip_tables
speedstep_lib ip6table_filter ip6_tables x_tables ipv6 microcode fuse
loop dm_mod snd_usb_audio snd_usb_lib snd_rawmidi snd_seq_device
snd_hda_codec_conexant arc4 snd_hda_intel ecb snd_hda_codec snd_hwdep
snd_pcm iwlcore snd_timer thinkpad_acpi snd mac80211 soundcore rtc_cmos
video rfkill led_class intel_agp iTCO_wdt output rtc_core snd_page_alloc
ohci1394 i2c_i801 button sr_mod wmi battery ac e1000e rtc_lib agpgart
cfg80211 nvram joydev i2c_core cdrom iTCO_vendor_support sg ieee1394
sd_mod us
Apr 21 00:44:06 linux-7vph kernel: bcore ext4 jbd2 crc16 edd ext3
mbcache jbd fan ahci libata scsi_mod thermal processor [last unloaded:
iwlagn]
Apr 21 00:44:06 linux-7vph kernel: Pid: 3193, comm: Xorg Not tainted
2.6.30-rc2-pae #24
Apr 21 00:44:06 linux-7vph kernel: Call Trace:
Apr 21 00:44:06 linux-7vph kernel: [<c0127768>] warn_slowpath+0x71/0xa0
Apr 21 00:44:06 linux-7vph kernel: [<c012f66f>] ? del_timer_sync+0xd/0x18
Apr 21 00:44:06 linux-7vph kernel: [<c030573c>] ?
schedule_timeout+0x154/0x16a
Apr 21 00:44:06 linux-7vph kernel: [<c01354f3>] ?
__cancel_work_timer+0x124/0x162
Apr 21 00:44:06 linux-7vph kernel: [<f82df3ba>] ?
i915_gem_retire_requests+0x141/0x15b [i915]
Apr 21 00:44:06 linux-7vph kernel: [<f82e07e2>]
i915_gem_idle+0x17a/0x28c [i915]
Apr 21 00:44:06 linux-7vph kernel: [<f82e0947>]
i915_gem_leavevt_ioctl+0x1f/0x2e [i915]
Apr 21 00:44:06 linux-7vph kernel: [<f828574c>] drm_ioctl+0x1f6/0x27c [drm]
Apr 21 00:44:06 linux-7vph kernel: [<f82e0928>] ?
i915_gem_leavevt_ioctl+0x0/0x2e [i915]
Apr 21 00:44:06 linux-7vph kernel: [<c0305dc0>] ? mutex_lock+0xe/0x28
Apr 21 00:44:06 linux-7vph kernel: [<f7ee5640>] ?
agpioc_release_wrap+0x57/0x5b [agpgart]
Apr 21 00:44:06 linux-7vph kernel: [<f7ee6279>] ? agp_ioctl+0x3b6/0x3d9
[agpgart]
Apr 21 00:44:06 linux-7vph kernel: [<c013ef0f>] ? getnstimeofday+0x51/0xda
Apr 21 00:44:06 linux-7vph kernel: [<c0196b3a>] vfs_ioctl+0x50/0x69
Apr 21 00:44:06 linux-7vph kernel: [<c0196fac>] do_vfs_ioctl+0x459/0x492
Apr 21 00:44:06 linux-7vph kernel: [<c01047fe>] ? timer_interrupt+0x3a/0x41
Apr 21 00:44:06 linux-7vph kernel: [<c0158a2a>] ?
handle_IRQ_event+0x8c/0x142
Apr 21 00:44:06 linux-7vph kernel: [<c0306e6f>] ? _spin_lock+0x8/0xb
Apr 21 00:44:06 linux-7vph kernel: [<c0159d5a>] ?
handle_edge_irq+0x108/0x111
Apr 21 00:44:06 linux-7vph kernel: [<c012bcaa>] ? __do_softirq+0x12b/0x133
Apr 21 00:44:06 linux-7vph kernel: [<c0197025>] sys_ioctl+0x40/0x5a
Apr 21 00:44:06 linux-7vph kernel: [<c01029d4>] sysenter_do_call+0x12/0x28
Apr 21 00:44:06 linux-7vph kernel: ---[ end trace e40fb1797bec2bee ]---
Apr 21 00:44:06 linux-7vph kernel: [drm:gm45_get_vblank_counter] *ERROR*
trying to get vblank count for disabled pipe 0
Apr 21 00:44:10 linux-7vph bonobo-activation-server (niella-19973):
could not associate with desktop session: Failed to connect to socket
/tmp/dbus-uxRGFTgO2e: Connection refused
Apr 21 00:44:31 linux-7vph init: Switching to runlevel: 5
Regards,
Niel
next reply other threads:[~2009-04-21 21:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-21 21:35 Niel Lambrechts [this message]
2009-04-23 21:12 ` 2.6.30-rc2: WARNING at i915_gem.c for i915_gem_idle Andrew Morton
2009-05-03 17:15 ` Niel Lambrechts
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49EE3C1E.8070208@gmail.com \
--to=niel.lambrechts@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.