From: Jelle de Jong <jelledejong@powercraft.nl>
To: video4linux-list@redhat.com
Subject: [not working] Conceptronic USB 2.0 Digital TV Receiver - CTVDIGRCU - Device Information
Date: Fri, 24 Apr 2009 11:43:24 +0200 [thread overview]
Message-ID: <49F189BC.5090606@powercraft.nl> (raw)
[-- Attachment #1: Type: text/plain, Size: 580 bytes --]
Hello everybody,
Apparently I was feeling a bit masochistic today, because I bought a new
usb dvb-t device with the hope it would work on my 2.6.26 kernel because
the 2.6.29 is extreme instable and my Digittrade DVB-T USB Stick (Afatech
DVB-T) (af9015.fw) does not work with mplayer which is a requirement for me.
So I bought a Conceptronic USB 2.0 Digital TV Receiver - CTVDIGRCU, but
it does not work. Would somebody willing to get this device working? I
can sent the device to you if you like.
The device information is attached in this email.
Best regards,
Jelle de Jong
[-- Attachment #2: Conceptronic USB 2.0 Digital TV Receiver - CTVDIGRCU - Device Information - v0.1.1j.txt --]
[-- Type: text/plain, Size: 4397 bytes --]
# vendor product page:
http://www.conceptronic.net/site/desktopdefault.aspx?tabindex=1&tabid=242&cid=40&gid=4050&pid=CTVDIGRCU
# vendor driver page
http://www.conceptronic.net/site/desktopdefault.aspx?tabindex=0&tabid=420&pc=CTVDIGRCU
# codes on device:
080800257
CTVDIGRCU
VERSION 2.0
C08-080 USB 2.0 Digital TV Reciever
# version 3 driver contains the below, but the device is version 2.0
# and the v2.0 driver on the webise is in a .exe i cant extract.
Afa Technologies, Inc.
AF15BDA.DeviceDesc = "Conceptronic CTVDIGRCU V3.0"
AF15BDA.DeviceDesc1 = "DVB-T 385U"
AF15BDA.FriendlyName = "AF9015 BDA Filter"
# dutch shop to where to buy them:
http://www.informatique.nl/445144/conceptronic-tv/dvb-t-adapter-usb2.0.html
$ uname -a
Linux debian-eeepc 2.6.29-1-686 #1 SMP Fri Apr 17 14:35:16 UTC 2009 i686 GNU/Linux
$ dpkg -l | grep 2.6.29
ii linux-image-2.6.29-1-686 2.6.29-3 Linux 2.6.29 image on PPro/Celeron/PII/PIII/P4
ii linux-libc-dev 2.6.29-3 Linux support headers for userspace development
$dmesg
[ 45.948050] usb 1-2: new high speed USB device using ehci_hcd and address 5
[ 46.081920] usb 1-2: New USB device found, idVendor=14aa, idProduct=0160
[ 46.081927] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 46.081932] usb 1-2: Product: DTV Receiver
[ 46.081935] usb 1-2: Manufacturer: DTV Receiver
[ 46.081939] usb 1-2: SerialNumber: 0000000000065658
[ 46.082129] usb 1-2: configuration #1 chosen from 1 choice
------------------------------------------------------------------------
$ sudo lsusb -vvv -d 14aa:0160
Bus 001 Device 005: ID 14aa:0160 AVerMedia (again) or C&E
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x14aa AVerMedia (again) or C&E
idProduct 0x0160
bcdDevice 1.00
iManufacturer 1 DTV Receiver
iProduct 2 DTV Receiver
iSerial 3 0000000000065658
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 USB2.0-Bulk&Iso
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 5 Bulk-In, Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 6 Iso-In, Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 2
Device Status: 0x0000
(Bus Powered)
[-- Attachment #3: Type: text/plain, Size: 164 bytes --]
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
next reply other threads:[~2009-04-24 9:43 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-24 9:43 Jelle de Jong [this message]
2009-04-24 12:17 ` [not working] Conceptronic USB 2.0 Digital TV Receiver - CTVDIGRCU - Device Information Antti Palosaari
2009-04-24 12:22 ` Antti Palosaari
2009-04-24 12:25 ` Jelle de Jong
2009-04-24 13:10 ` Antti Palosaari
2009-04-25 7:52 ` Jelle de Jong
2009-04-25 8:25 ` Antti Palosaari
2009-04-25 8:40 ` Jelle de Jong
2009-04-25 8:44 ` Antti Palosaari
2009-04-25 8:47 ` Antti Palosaari
2009-04-25 8:48 ` Jelle de Jong
2009-05-23 15:36 ` Jelle de Jong
2009-06-05 15:21 ` Antti Palosaari
2009-06-05 16:03 ` Jelle de Jong
2009-06-05 17:09 ` Antti Palosaari
2009-06-05 17:20 ` Jan Hoogenraad
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49F189BC.5090606@powercraft.nl \
--to=jelledejong@powercraft.nl \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.