From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jon Sturm Date: Tue, 28 Apr 2009 18:05:54 +0000 Subject: [lm-sensors] Sensors on an ECS A535 laptop Message-Id: <49F74582.80102@aol.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org I have an ECS A535 Laptop and I am trying to figure out how if at all I=20 can get some support for my sensors, currently sensors detect finds Driver `it87': * ISA bus, address 0x290 Chip `ITE IT8705F Super IO Sensors' (confidence: 9) But upon running sensors I get mostly garbage output in0: +0.00 V (min =3D +0.00 V, max =3D +4.08 V) ALARM in1: +0.00 V (min =3D +0.00 V, max =3D +4.08 V) ALARM in2: +0.00 V (min =3D +0.00 V, max =3D +4.08 V) ALARM in3: +0.00 V (min =3D +0.00 V, max =3D +4.08 V) ALARM in4: +0.00 V (min =3D +0.00 V, max =3D +4.08 V) ALARM in5: +0.00 V (min =3D +0.00 V, max =3D +4.08 V) ALARM in6: +0.00 V (min =3D +0.00 V, max =3D +4.08 V) ALARM +5V: +0.03 V (min =3D +0.00 V, max =3D +4.08 V) =20 Vbat: +4.08 V fan1: 0 RPM (min =3D 0 RPM) Fan2: 0 RPM (min =3D 0 RPM) fan3: 0 RPM (min =3D 0 RPM) M/B Temp: +68.0=B0C (low =3D +127.0=B0C, high =3D +85.0=B0C) sensor = =3D=20 thermal diode CPU Temp: +67.0=B0C (low =3D -1.0=B0C, high =3D +127.0=B0C) sensor = =3D thermistor temp3: -128.0=B0C (low =3D -1.0=B0C, high =3D +127.0=B0C) sensor = =3D disabled If I run pwmconfig my fan does spin up but as sensors does not show any=20 fan speeds it just informs me that it can't do anything and exits. Under=20 windows I am able to view one of the fan's speed using speedfan and the=20 fan_div is detected as being 128. The Bios tells me nothing when it=20 comes to system temps so I was hoping someone would be able to at least=20 point me in the right direction. _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors