From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH] x86: change apic_version array to bsp apic ver only
Date: Sat, 02 May 2009 15:27:49 -0700 [thread overview]
Message-ID: <49FCC8E5.8050202@kernel.org> (raw)
In-Reply-To: <20090502193203.GG4791@lenovo>
only need to record boot cpu apic version
[ Impact: save some bytes ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/mpspec.h | 2 +-
arch/x86/kernel/acpi/boot.c | 7 +++----
arch/x86/kernel/apic/apic.c | 16 ++++++++--------
arch/x86/kernel/apic/es7000_32.c | 4 +---
arch/x86/kernel/apic/io_apic.c | 2 +-
arch/x86/kernel/smpboot.c | 10 +++++-----
arch/x86/kernel/visws_quirks.c | 3 ++-
7 files changed, 21 insertions(+), 23 deletions(-)
Index: linux-2.6/arch/x86/include/asm/mpspec.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/mpspec.h
+++ linux-2.6/arch/x86/include/asm/mpspec.h
@@ -5,7 +5,7 @@
#include <asm/mpspec_def.h>
-extern int apic_version[MAX_APICS];
+extern int apic_version;
extern int pic_mode;
#ifdef CONFIG_X86_32
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -225,7 +225,7 @@ static void __cpuinit acpi_register_lapi
}
if (boot_cpu_physical_apicid != -1U)
- ver = apic_version[boot_cpu_physical_apicid];
+ ver = apic_version;
generic_processor_info(id, ver);
}
@@ -808,8 +808,7 @@ static void __init acpi_register_lapic_a
set_fixmap_nocache(FIX_APIC_BASE, address);
if (boot_cpu_physical_apicid == -1U) {
boot_cpu_physical_apicid = read_apic_id();
- apic_version[boot_cpu_physical_apicid] =
- GET_APIC_VERSION(apic_read(APIC_LVR));
+ apic_version = GET_APIC_VERSION(apic_read(APIC_LVR));
}
}
@@ -937,7 +936,7 @@ static u8 __init uniq_ioapic_id(u8 id)
{
#ifdef CONFIG_X86_32
if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
- !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+ !APIC_XAPIC(apic_version))
return io_apic_get_unique_id(nr_ioapics, id);
else
return id;
Index: linux-2.6/arch/x86/kernel/apic/apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/apic.c
+++ linux-2.6/arch/x86/kernel/apic/apic.c
@@ -1615,8 +1615,7 @@ void __init init_apic_mappings(void)
new_apicid = read_apic_id();
if (boot_cpu_physical_apicid != new_apicid) {
boot_cpu_physical_apicid = new_apicid;
- apic_version[new_apicid] =
- GET_APIC_VERSION(apic_read(APIC_LVR));
+ apic_version = GET_APIC_VERSION(apic_read(APIC_LVR));
}
}
@@ -1624,7 +1623,7 @@ void __init init_apic_mappings(void)
* This initializes the IO-APIC and APIC hardware if this is
* a UP kernel.
*/
-int apic_version[MAX_APICS];
+int apic_version;
int __init APIC_init_uniprocessor(void)
{
@@ -1645,8 +1644,7 @@ int __init APIC_init_uniprocessor(void)
/*
* Complain if the BIOS pretends there is one.
*/
- if (!cpu_has_apic &&
- APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+ if (!cpu_has_apic && APIC_INTEGRATED(apic_version)) {
pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
boot_cpu_physical_apicid);
clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
@@ -1871,7 +1869,9 @@ void __cpuinit generic_processor_info(in
version);
version = 0x10;
}
- apic_version[apicid] = version;
+
+ if (apicid == boot_cpu_physical_apicid)
+ apic_version = version;
if (num_processors >= nr_cpu_ids) {
int max = nr_cpu_ids;
@@ -1888,10 +1888,10 @@ void __cpuinit generic_processor_info(in
num_processors++;
cpu = cpumask_next_zero(-1, cpu_present_mask);
- if (version != apic_version[boot_cpu_physical_apicid])
+ if (version != apic_version)
WARN_ONCE(1,
"ACPI: apic version mismatch, bootcpu: %x cpu %d: %x\n",
- apic_version[boot_cpu_physical_apicid], cpu, version);
+ apic_version, cpu, version);
physid_set(apicid, phys_cpu_present_map);
if (apicid == boot_cpu_physical_apicid) {
Index: linux-2.6/arch/x86/kernel/apic/es7000_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/es7000_32.c
+++ linux-2.6/arch/x86/kernel/apic/es7000_32.c
@@ -512,11 +512,9 @@ static void es7000_init_apic_ldr(void)
static void es7000_setup_apic_routing(void)
{
- int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
-
printk(KERN_INFO
"Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n",
- (apic_version[apic] == 0x14) ?
+ (apic_version == 0x14) ?
"Physical Cluster" : "Logical Cluster",
nr_ioapics, cpumask_bits(es7000_target_cpus())[0]);
}
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -2010,7 +2010,7 @@ static void __init setup_ioapic_ids_from
* no meaning without the serial APIC bus.
*/
if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
- || APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+ || APIC_XAPIC(apic_version))
return;
/*
* This is broken; anything with a real cpu count has to
Index: linux-2.6/arch/x86/kernel/smpboot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/smpboot.c
+++ linux-2.6/arch/x86/kernel/smpboot.c
@@ -522,7 +522,7 @@ wakeup_secondary_cpu_via_nmi(int logical
* Give the other CPU some time to accept the IPI.
*/
udelay(200);
- if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+ if (APIC_INTEGRATED(apic_version)) {
maxlvt = lapic_get_maxlvt();
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
apic_write(APIC_ESR, 0);
@@ -549,7 +549,7 @@ wakeup_secondary_cpu_via_init(int phys_a
/*
* Be paranoid about clearing APIC errors.
*/
- if (APIC_INTEGRATED(apic_version[phys_apicid])) {
+ if (APIC_INTEGRATED(apic_version)) {
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
@@ -589,7 +589,7 @@ wakeup_secondary_cpu_via_init(int phys_a
* Determine this based on the APIC version.
* If we don't have an integrated APIC, don't send the STARTUP IPIs.
*/
- if (APIC_INTEGRATED(apic_version[phys_apicid]))
+ if (APIC_INTEGRATED(apic_version))
num_starts = 2;
else
num_starts = 0;
@@ -753,7 +753,7 @@ do_rest:
/*
* Be paranoid about clearing APIC errors.
*/
- if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+ if (APIC_INTEGRATED(apic_version)) {
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
}
@@ -990,7 +990,7 @@ static int __init smp_sanity_check(unsig
/*
* If we couldn't find a local APIC, then get out of here now!
*/
- if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) &&
+ if (APIC_INTEGRATED(apic_version) &&
!cpu_has_apic) {
printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
boot_cpu_physical_apicid);
Index: linux-2.6/arch/x86/kernel/visws_quirks.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/visws_quirks.c
+++ linux-2.6/arch/x86/kernel/visws_quirks.c
@@ -205,7 +205,8 @@ static void __init MP_processor_info(str
m->apicid);
ver = 0x10;
}
- apic_version[m->apicid] = ver;
+ if (m->cpuflag & CPU_BOOTPROCESSOR)
+ apic_version = ver;
}
static int __init visws_find_smp_config(unsigned int reserve)
next prev parent reply other threads:[~2009-05-02 22:28 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20090430084145.GD21699@elte.hu>
2009-05-02 4:48 ` [PATCH] x86: read apic id if it is not acpi_lapic Yinghai Lu
2009-05-02 7:02 ` Cyrill Gorcunov
2009-05-02 17:40 ` [PATCH] x86: read apic id if it is not acpi_lapic -v2 Yinghai Lu
[not found] ` <20090502184108.GC4791@lenovo>
[not found] ` <49FC9BFC.4040904@kernel.org>
[not found] ` <20090502192441.GE4791@lenovo>
[not found] ` <49FC9F28.2070802@kernel.org>
[not found] ` <20090502193203.GG4791@lenovo>
2009-05-02 22:27 ` Yinghai Lu [this message]
2009-05-11 9:20 ` Ingo Molnar
2009-05-11 9:26 ` Ingo Molnar
2009-05-11 9:40 ` Cyrill Gorcunov
2009-05-11 11:06 ` Ingo Molnar
2009-05-11 9:53 ` [tip:x86/apic] x86: read apic ID in the !acpi_lapic case tip-bot for Yinghai Lu
2009-05-11 11:02 ` Ingo Molnar
2009-05-11 13:41 ` Cyrill Gorcunov
2009-05-11 13:49 ` Ingo Molnar
2009-05-11 17:43 ` Yinghai Lu
2009-05-11 18:05 ` Cyrill Gorcunov
2009-05-11 20:01 ` Ingo Molnar
2009-05-11 20:05 ` Cyrill Gorcunov
2009-05-11 20:14 ` Yinghai Lu
2009-05-11 13:54 ` [tip:x86/apic] x86: apic: Fixmap apic address even if apic disabled tip-bot for Cyrill Gorcunov
2009-05-11 16:11 ` [tip:x86/apic] x86: read apic ID in the !acpi_lapic case Yinghai Lu
2009-05-12 10:36 ` [tip:irq/numa] " tip-bot for Yinghai Lu
2009-05-12 11:22 ` Ingo Molnar
2009-05-12 14:51 ` Cyrill Gorcunov
2009-05-12 14:58 ` Ingo Molnar
2009-05-12 15:00 ` Cyrill Gorcunov
2009-05-12 15:04 ` Yinghai Lu
2009-05-12 15:06 ` Ingo Molnar
2009-05-12 16:46 ` Ingo Molnar
2009-05-12 17:02 ` Cyrill Gorcunov
2009-05-12 17:12 ` Yinghai Lu
2009-05-12 17:27 ` Cyrill Gorcunov
2009-05-12 18:31 ` Yinghai Lu
2009-05-12 18:33 ` Ingo Molnar
2009-05-12 18:35 ` Yinghai Lu
2009-05-12 19:05 ` Ingo Molnar
2009-05-12 19:23 ` Yinghai Lu
2009-05-13 13:14 ` Ingo Molnar
2009-05-13 16:41 ` Yinghai Lu
2009-05-18 7:39 ` [tip:irq/numa] x86: don't call read_apic_id if !cpu_has_apic tip-bot for Yinghai Lu
2009-05-12 16:48 ` [tip:irq/numa] x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector(), fix tip-bot for Cyrill Gorcunov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49FCC8E5.8050202@kernel.org \
--to=yinghai@kernel.org \
--cc=gorcunov@gmail.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.