All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@cam.ac.uk>
To: Mark Brown <broonie@sirena.org.uk>
Cc: alsa-devel@alsa-project.org,
	ARM Linux <linux-arm-kernel@lists.arm.linux.org.uk>
Subject: Re: [ASoC PATCH 1/1] IMote 2 ASoC Support
Date: Mon, 04 May 2009 14:54:11 +0000	[thread overview]
Message-ID: <49FF0193.1080908@cam.ac.uk> (raw)
In-Reply-To: <49FEFED3.7090104@cam.ac.uk>

From: Jonathan Cameron <jic23@cam.ac.uk>

IMote2 ASoC Support

This patch adds the ASoC side of the board support for the
Crossbow IMB400 daughter board.

Thanks to Crossbow for considerable assistance.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>

---

Changes since last post (in response to Mark's comments)

* Removed PLL code. The driver never initializes so why bother to
disable it.

* Removed excess headers.

Relatively straight forward configuration with the PXA acting as the clock
master.
 sound/soc/pxa/Kconfig  |    9 ++++
 sound/soc/pxa/Makefile |    2 +
 sound/soc/pxa/imote2.c |  114 ++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 125 insertions(+), 0 deletions(-)

diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index ad8a10f..eb75a1c 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -134,3 +134,12 @@ config SND_PXA2XX_SOC_MIOA701
         help
           Say Y if you want to add support for SoC audio on the
           MIO A701.
+
+config SND_PXA2XX_SOC_IMOTE2
+       tristate "SoC Audio support for IMote 2"
+       depends on SND_PXA2XX_SOC && MACH_INTELMOTE2
+       select SND_PXA2XX_SOC_I2S
+       select SND_SOC_WM8940
+       help
+         Say Y if you want to add support for SoC audio on the
+	 IMote 2.
diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile
index 4b90c3c..6e096b4 100644
--- a/sound/soc/pxa/Makefile
+++ b/sound/soc/pxa/Makefile
@@ -22,6 +22,7 @@ snd-soc-palm27x-objs := palm27x.o
 snd-soc-zylonite-objs := zylonite.o
 snd-soc-magician-objs := magician.o
 snd-soc-mioa701-objs := mioa701_wm9713.o
+snd-soc-imote2-objs := imote2.o
 
 obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o
 obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o
@@ -35,3 +36,4 @@ obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o
 obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o
 obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o
 obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o
+obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o
diff --git a/sound/soc/pxa/imote2.c b/sound/soc/pxa/imote2.c
new file mode 100644
index 0000000..405587a
--- /dev/null
+++ b/sound/soc/pxa/imote2.c
@@ -0,0 +1,114 @@
+
+#include <linux/module.h>
+#include <sound/soc.h>
+
+#include <asm/mach-types.h>
+
+#include "../codecs/wm8940.h"
+#include "pxa2xx-i2s.h"
+#include "pxa2xx-pcm.h"
+
+static int imote2_asoc_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	unsigned int clk = 0;
+	int ret;
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+	case 48000:
+	case 96000:
+		clk = 12288000;
+		break;
+	case 11025:
+	case 22050:
+	case 44100:
+		clk = 11289600;
+		break;
+	}
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
+				  | SND_SOC_DAIFMT_NB_NF
+				  | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* CPU should be clock master */
+	ret = snd_soc_dai_set_fmt(cpu_dai,  SND_SOC_DAIFMT_I2S
+				  | SND_SOC_DAIFMT_NB_NF
+				  | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set the I2S system clock as input (unused) */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, PXA2XX_I2S_SYSCLK, clk,
+		SND_SOC_CLOCK_OUT);
+
+	return ret;
+}
+
+static struct snd_soc_ops imote2_asoc_ops = {
+	.hw_params = imote2_asoc_hw_params,
+};
+
+static struct snd_soc_dai_link imote2_dai = {
+	.name = "WM8940",
+	.stream_name = "WM8940",
+	.cpu_dai = &pxa_i2s_dai,
+	.codec_dai = &wm8940_dai,
+	.ops = &imote2_asoc_ops,
+};
+
+static struct snd_soc_card snd_soc_imote2 = {
+	.name = "Imote2",
+	.platform = &pxa2xx_soc_platform,
+	.dai_link = &imote2_dai,
+	.num_links = 1,
+};
+
+static struct snd_soc_device imote2_snd_devdata = {
+	.card = &snd_soc_imote2,
+	.codec_dev = &soc_codec_dev_wm8940,
+};
+
+static struct platform_device *imote2_snd_device;
+
+static int __init imote2_asoc_init(void)
+{
+	int ret;
+
+	if (!machine_is_intelmote2())
+		return -ENODEV;
+	imote2_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!imote2_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(imote2_snd_device, &imote2_snd_devdata);
+	imote2_snd_devdata.dev = &imote2_snd_device->dev;
+	ret = platform_device_add(imote2_snd_device);
+	if (ret)
+		platform_device_put(imote2_snd_device);
+
+	return ret;
+}
+module_init(imote2_asoc_init);
+
+static void __exit imote2_asoc_exit(void)
+{
+	platform_device_unregister(imote2_snd_device);
+}
+module_exit(imote2_asoc_exit);
+
+MODULE_AUTHOR("Jonathan Cameron");
+MODULE_DESCRIPTION("ALSA SoC Imote 2");
+MODULE_LICENSE("GPL");

  reply	other threads:[~2009-05-04 14:54 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-04 14:38 [ASoC PATCH 1/1] IMote 2 ASoC Support Jonathan Cameron
2009-05-04 14:41 ` Mark Brown
2009-05-04 14:42   ` Jonathan Cameron
2009-05-04 14:54     ` Jonathan Cameron [this message]
2009-05-04 20:41       ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49FF0193.1080908@cam.ac.uk \
    --to=jic23@cam.ac.uk \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@sirena.org.uk \
    --cc=linux-arm-kernel@lists.arm.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.