From: Michal Simek <monstr@monstr.eu>
To: u-boot@lists.denx.de
Subject: [U-Boot] Xilinx SPI driver
Date: Wed, 06 May 2009 16:21:40 +0200 [thread overview]
Message-ID: <4A019CF4.3070004@monstr.eu> (raw)
In-Reply-To: <905854.4395.qm@web54006.mail.re2.yahoo.com>
Hi,
> Hi
>
> After searching internet for a good example of using U-boot PPC405 in xilinx FPGAs with only a SPI Flash, and finding nothing, I began writing my own driver. I used a couple of standalone examples besides the linux driver as the base point, and could finally use it. As much as I have tested the system, it is working fine with a m25p64 spi flash.
> Now I would be happy to share the driver, but haven't done such a thing previously. I am not even much familiar with patch! Is there any document telling the procedure?
> Besides I have developed board support for suaku V sz410 board, and a simplistic driver for xilinx frame buffer core too (which is not as much tested as the spi driver). Should I submit them too?
>
Adding this driver to mainline depends on style of your driver.
You should look at http://www.denx.de/wiki/U-Boot/CodingStyle and
http://www.denx.de/wiki/U-Boot/Patches
Both drivers will be useful. I can test them on Microblaze cpu.
Please write there any information about configuration - which IP you use and how to test it.
If you want you can send your patches directly to me and I take a look before you send them to
mailing list.
Regards,
Michal
> Regards
> S. M. Sajjadi
>
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
prev parent reply other threads:[~2009-05-06 14:21 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-04 17:30 [U-Boot] Xilinx SPI driver Seyyed Mohammad Sajjadi
2009-05-06 14:21 ` Michal Simek [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A019CF4.3070004@monstr.eu \
--to=monstr@monstr.eu \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.