From: Torben Schulz <public@letorbi.de>
To: Alsa-Devel <alsa-devel@alsa-project.org>
Cc: Takashi Iwai <tiwai@suse.de>
Subject: [PATCH 1/1] Improved MacBook 3,1 support
Date: Mon, 18 May 2009 12:52:43 +0200 [thread overview]
Message-ID: <4A113DFB.1080106@letorbi.de> (raw)
This patch adds support for MacBook 3,1 sound by adding a model new "mb31" with the appropriate init verbs, mixers and channel modes to the ALC883 configuration. patch_alc882() and patch_alc883() are modified to handle the MacBook 3,1 sound-chip (Realtek ALC889A) correctly.
Note: Diff'ed against the 2009-05-16 snapshot (Soory, I don't have regular net access atm.)
Signed-off by: Torben Schulz <public@letorbi.de>
--- alsa-driver/alsa-kernel/pci/hda/patch_realtek.c 2009-05-16 21:24:45.000000000 +0200
+++ alsa-driver-mod/alsa-kernel/pci/hda/patch_realtek.c 2009-05-17 19:45:48.000000000 +0200
@@ -240,6 +240,7 @@
ALC883_3ST_6ch_INTEL,
ALC888_ASUS_M90V,
ALC888_ASUS_EEE1601,
+ ALC889A_MB31,
ALC1200_ASUS_P5Q,
ALC883_AUTO,
ALC883_MODEL_LAST,
@@ -7290,7 +7291,7 @@
case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */
case 0x106b00a4: /* MacbookPro4,1 */
case 0x106b2c00: /* Macbook Pro rev3 */
- case 0x106b3600: /* Macbook 3.1 */
+ /* Macbook 3.1 (0x106b3600) is handled by patch_alc883() */
case 0x106b3800: /* MacbookPro4,1 - latter revision */
board_config = ALC885_MBP3;
break;
@@ -7491,6 +7492,17 @@
},
};
+static struct hda_input_mux alc889A_mb31_capture_source = {
+ .num_items = 2,
+ .items = {
+ { "Mic", 0x0 },
+ /* Front Mic (0x01) unused */
+ { "Line", 0x2 },
+ /* Line 2 (0x03) unused */
+ /* CD (0x04) unsused? */
+ },
+};
+
/*
* 2ch mode
*/
@@ -7609,6 +7621,49 @@
{ 8, alc883_sixstack_ch8_init },
};
+/* 2ch mode (Speaker:front, Subwoofer:CLFE, Line:input, Headphones:front) */
+static struct hda_verb alc889A_mb31_ch2_init[] = {
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Headphones as front */
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer output on */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Line as input*/
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Line output off */
+ { } /* end */
+};
+
+/* 4ch mode (Speaker:front, Subwoofer:CLFE, Line:CLFE, Headphones:front) */
+static struct hda_verb alc889A_mb31_ch4_init[] = {
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Headphones as front */
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer output on */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* Line as output */
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line output on */
+ { } /* end */
+};
+
+/* 5ch mode (Speaker:front, Subwoofer:CLFE, Line:input, Headphones:rear) */
+static struct hda_verb alc889A_mb31_ch5_init[] = {
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphones as rear */
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer output on */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Line as input*/
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Line output off */
+ { } /* end */
+};
+
+/* 6ch mode (Speaker:front, Subwoofer:off, Line:CLFE, Headphones:Rear) */
+static struct hda_verb alc889A_mb31_ch6_init[] = {
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphones as front */
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Subwoofer output off */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* Line as output */
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line output on */
+ { } /* end */
+};
+
+static struct hda_channel_mode alc889A_mb31_6ch_modes[4] = {
+ { 2, alc889A_mb31_ch2_init },
+ { 4, alc889A_mb31_ch4_init },
+ { 5, alc889A_mb31_ch5_init },
+ { 6, alc889A_mb31_ch6_init },
+};
+
static struct hda_verb alc883_medion_eapd_verbs[] = {
/* eanable EAPD on medion laptop */
{0x20, AC_VERB_SET_COEF_INDEX, 0x07},
@@ -7887,6 +7942,31 @@
{ } /* end */
};
+static struct snd_kcontrol_new alc889A_mb31_mixer[] = {
+ /* Output mixers */
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x0c, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 0x02, HDA_INPUT),
+ /* Output switches */
+ HDA_CODEC_MUTE("Enable Speaker", 0x14, 0x00, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Enable Headphones", 0x15, 0x00, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("Enable LFE", 0x16, 2, 0x00, HDA_OUTPUT),
+ /* Boost mixers */
+ HDA_CODEC_VOLUME("Mic Boost", 0x18, 0x00, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Boost", 0x1a, 0x00, HDA_INPUT),
+ /* Input mixers */
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x00, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x00, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ { } /* end */
+};
+
static struct hda_bind_ctls alc883_bind_cap_vol = {
.ops = &snd_hda_bind_vol,
.values = {
@@ -8559,6 +8639,38 @@
alc_automute_pin(codec);
}
+static struct hda_verb alc889A_mb31_verbs[] = {
+ /* Init rear pin (used as headphone output) */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc4}, /* Apple Headphones */
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Connect to front */
+ {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+ /* Init line pin (used as output in 4ch and 6ch mode) */
+ {0x1a, AC_VERB_SET_CONNECT_SEL, 0x02}, /* Connect to CLFE */
+ /* Init line 2 pin (used as headphone out by default) */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Use as input */
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Mute output */
+ { } /* end */
+};
+
+/* Mute speakers according to the headphone jack state */
+static void alc889A_mb31_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+
+ /* Mute only in 2ch or 4ch mode */
+ if (snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_CONNECT_SEL, 0) == 0x00) {
+ present = snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+ snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0, HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+ }
+}
+
+static void alc889A_mb31_unsol_event(struct hda_codec *codec, unsigned int res)
+{
+ if ((res >> 26) == ALC880_HP_EVENT)
+ alc889A_mb31_automute(codec);
+}
+
#ifdef CONFIG_SND_HDA_POWER_SAVE
#define alc883_loopbacks alc880_loopbacks
#endif
@@ -8599,6 +8711,7 @@
[ALC888_FUJITSU_XA3530] = "fujitsu-xa3530",
[ALC883_3ST_6ch_INTEL] = "3stack-6ch-intel",
[ALC1200_ASUS_P5Q] = "asus-p5q",
+ [ALC889A_MB31] = "mb31",
[ALC883_AUTO] = "auto",
};
@@ -9050,6 +9163,20 @@
.channel_mode = alc883_sixstack_modes,
.input_mux = &alc883_capture_source,
},
+ [ALC889A_MB31] = {
+ .mixers = { alc889A_mb31_mixer, alc883_chmode_mixer},
+ .init_verbs = { alc883_init_verbs, alc889A_mb31_verbs, alc880_gpio1_init_verbs },
+ .adc_nids = alc883_adc_nids,
+ .num_adc_nids = ARRAY_SIZE(alc883_adc_nids),
+ .dac_nids = alc883_dac_nids,
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .channel_mode = alc889A_mb31_6ch_modes,
+ .num_channel_mode = ARRAY_SIZE(alc889A_mb31_6ch_modes),
+ .input_mux = &alc889A_mb31_capture_source,
+ .dig_out_nid = ALC883_DIGOUT_NID,
+ .unsol_event = alc889A_mb31_unsol_event,
+ .init_hook = alc889A_mb31_automute,
+ },
};
@@ -9195,11 +9322,19 @@
board_config = snd_hda_check_board_config(codec, ALC883_MODEL_LAST,
alc883_models,
alc883_cfg_tbl);
- if (board_config < 0) {
- printk(KERN_INFO "hda_codec: Unknown model for ALC883, "
- "trying auto-probe from BIOS...\n");
- board_config = ALC883_AUTO;
- }
+ if (board_config < 0 || board_config >= ALC883_MODEL_LAST) {
+ /* Pick up systems that don't supply PCI SSID */
+ switch (codec->subsystem_id) {
+ case 0x106b3600: /* Macbook 3.1 */
+ board_config = ALC889A_MB31;
+ break;
+ default:
+ printk(KERN_INFO "hda_codec: Unknown model for ALC883, "
+ "trying auto-probe from BIOS...\n");
+ board_config = ALC883_AUTO;
+ }
+ }
+
if (board_config == ALC883_AUTO) {
/* automatic parse from the BIOS config */
next reply other threads:[~2009-05-18 10:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-18 10:52 Torben Schulz [this message]
2009-05-18 11:04 ` [PATCH 1/1] Improved MacBook 3,1 support Takashi Iwai
2009-05-18 13:02 ` Torben Schulz
2009-05-18 13:18 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A113DFB.1080106@letorbi.de \
--to=public@letorbi.de \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.