From: Tomasz Chmielewski <mangoo@wpkg.org>
To: linux-wireless@vger.kernel.org
Subject: ipw2100: Oops, Data bus error
Date: Tue, 19 May 2009 18:40:19 +0200 [thread overview]
Message-ID: <4A12E0F3.2040209@wpkg.org> (raw)
I'm not sure if it's interesting or not.
On ASUS WL-500gP (MIPS platform, with OpenWRT patches), running 2.6.29.3 kernel, I'm getting
an Oops (see below) when I remove the ipw2100 module and modprobe it again.
Let me know if I should decode the Oops etc., or if has perhaps something to do with the board
not fully supported by the upstream kernel, and just leave it.
Output from lspci:
00:02.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
Subsystem: Intel Corporation Samsung X10/P30 integrated WLAN
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 6
Region 0: Memory at 40001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Kernel modules: ipw2100
# modprobe ipw2100
[42949450.360000] lib80211: common routines for IEEE802.11 drivers
[42949450.440000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[42949450.440000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[42949450.550000] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[42949450.560000] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[42949450.580000] PCI: Enabling device 0000:00:02.0 (0000 -> 0002)
[42949450.590000] PCI: Fixing up device 0000:00:02.0
[42949450.590000] ipw2100Device not found via register read.
mangoo:~# rmmod ipw2100
mangoo:~# modprobe ipw2100
[42949611.580000] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[42949611.590000] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[42949611.610000] PCI: Fixing up device 0000:00:02.0
[42949611.610000] Data bus error, epc == c02b8d54, ra == c02b8d48
[42949611.610000] Oops[#1]:
[42949611.610000] Cpu 0
[42949611.610000] $ 0 : 00000000 1000d800 c02c8000 00000000
[42949611.610000] $ 4 : c02c0000 00000000 00000001 000000dc
[42949611.610000] $ 8 : 00000000 00000000 00000002 80340000
[42949611.610000] $12 : 80330000 00000030 00000008 00000000
[42949611.610000] $16 : 800372e8 81d4db28 00000000 c02bc374
[42949611.610000] $20 : 81d4d000 81ccb400 c02c8000 004fe008
[42949611.610000] $24 : 028f5beb 80180eb4
[42949611.610000] $28 : 80c36000 80c37cd8 7fa2db88 c02b8d48
[42949611.610000] Hi : 00000083
[42949611.610000] Lo : e42b2000
[42949611.610000] epc : c02b8d54 0xc02b8d54
[42949611.610000] Not tainted
[42949611.610000] ra : c02b8d48 0xc02b8d48
[42949611.610000] Status: 1000d803 KERNEL EXL IE
[42949611.610000] Cause : 0080001c
[42949611.610000] PrId : 00029006 (Broadcom BCM3302)
[42949611.610000] Modules linked in: ipw2100(+) sch_sfq cls_fw sch_htb xt_MARK ipt_ULOG xt_recent xt_state xt_tcpudp iptable_filter iptable_mangle iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables x_tables fuse ohci_hcd libipw lib80211 uhci_hcd [last unloaded: ipw2100]
[42949611.610000] Process modprobe (pid: 1153, threadinfo=80c36000, task=81330088, tls=2aad96f0)
[42949611.610000] Stack : 00000001 00000000 00000400 81ea1fb0 00000000 00000000 00000000 00000000
[42949611.610000] 00000000 00000000 00000000 00000000 00000000 00000080 4a12df14 2f222ee2
[42949611.610000] c02c09e0 81ccb400 00000000 c02c0a10 c02c4000 00000000 00000000 80166874
[42949611.610000] 81ccb458 c02c0a10 c02c4000 801850d8 c02c09e0 81ccb400 c02c0d5c 00000000
[42949611.610000] 81ccb458 81ccb458 c02c0a10 80185304 81c34a08 8014d614 000031f1 1000d800
[42949611.610000] ...
[42949611.610000] Call Trace:[<c02c4000>] 0xc02c4000
[42949611.610000] [<80166874>] 0x80166874
[42949611.610000] [<c02c4000>] 0xc02c4000
[42949611.610000] [<801850d8>] 0x801850d8
[42949611.610000] [<80185304>] 0x80185304
[42949611.610000] [<8014d614>] 0x8014d614
[42949611.610000] [<8018549c>] 0x8018549c
[42949611.610000] [<8018213c>] 0x8018213c
[42949611.610000] [<8014d398>] 0x8014d398
[42949611.610000] [<8018542c>] 0x8018542c
[42949611.610000] [<80184540>] 0x80184540
[42949611.610000] [<c02c4000>] 0xc02c4000
[42949611.610000] [<8014dba4>] 0x8014dba4
[42949611.610000] [<80184bd0>] 0x80184bd0
[42949611.610000] [<80184ba8>] 0x80184ba8
[42949611.610000] [<c02c4000>] 0xc02c4000
[42949611.610000] [<80185730>] 0x80185730
[42949611.610000] [<c02c4000>] 0xc02c4000
[42949611.610000] [<80166b30>] 0x80166b30
[42949611.610000] [<80081c38>] 0x80081c38
[42949611.610000] [<c02c4068>] 0xc02c4068
[42949611.610000] [<8017e7f4>] 0x8017e7f4
[42949611.610000] [<8000c664>] 0x8000c664
[42949611.610000] [<8007d528>] 0x8007d528
[42949611.610000] [<8007d4ec>] 0x8007d4ec
[42949611.610000] [<8004a1a4>] 0x8004a1a4
[42949611.610000] [<80059288>] 0x80059288
[42949611.610000] [<80059238>] 0x80059238
[42949611.610000] [<800031d0>] 0x800031d0
[42949611.610000] [<800031d0>] 0x800031d0
[42949611.610000]
[42949611.610000]
[42949611.610000] Code: 8e820024 10400300 3c04c02c <8c430090> 3c02d555 344255d5 146202fc 3c028003 26a20058
Segmentation fault
--
Tomasz Chmielewski
http://wpkg.org
next reply other threads:[~2009-05-19 16:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-19 16:40 Tomasz Chmielewski [this message]
2009-05-19 17:33 ` ipw2100: Oops, Data bus error John W. Linville
2009-05-19 18:18 ` Tomasz Chmielewski
2009-06-01 21:11 ` reinette chatre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A12E0F3.2040209@wpkg.org \
--to=mangoo@wpkg.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.