From: Mario Limonciello <mario_limonciello@dell.com>
To: Oliver Neukum <oliver@neukum.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>,
Marcel Holtmann <marcel@holtmann.org>,
linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] Explicitly disable BT radio using rfkill interface on suspend
Date: Tue, 19 May 2009 15:36:40 -0500 [thread overview]
Message-ID: <4A131858.3080805@dell.com> (raw)
In-Reply-To: <200905192158.12784.oliver@neukum.org>
[-- Attachment #1.1: Type: text/plain, Size: 379 bytes --]
Hi Oliver:
Oliver Neukum wrote:
> Am Dienstag, 19. Mai 2009 18:52:47 schrieb Mario Limonciello:
>
>
> If the drivers support reset_resume(), no udev event is generated, but the
> devices have to be present for that. Please post dmesg.
>
> Regards
> Oliver
>
Sure, attaching.
--
Mario Limonciello
*Dell | Linux Engineering*
mario_limonciello@dell.com
[-- Attachment #1.2: dmesg_postsuspend.txt --]
[-- Type: text/plain, Size: 67232 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-5-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.0-3ubuntu3) ) #6-Ubuntu SMP Mon May 11 19:56:30 UTC 2009 (Ubuntu 2.6.30-5.6-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000006fec0000 (usable)
[ 0.000000] BIOS-e820: 000000006fec0000 - 000000006fecf000 (ACPI data)
[ 0.000000] BIOS-e820: 000000006fecf000 - 000000006fee5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006fee5000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x6fec0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-DBFFF uncachable
[ 0.000000] DC000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009dc00 (usable)
[ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000006fec0000 (usable)
[ 0.000000] modified: 000000006fec0000 - 000000006fecf000 (ACPI data)
[ 0.000000] modified: 000000006fecf000 - 000000006fee5000 (ACPI NVS)
[ 0.000000] modified: 000000006fee5000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 3787e000 - 37fef6d5
[ 0.000000] Allocated new RAMDISK: 00859000 - 00fca6d5
[ 0.000000] Move RAMDISK from 000000003787e000 - 0000000037fef6d4 to 00859000 - 00fca6d4
[ 0.000000] ACPI: RSDP 000f7b20 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 6fec3b2f 000A4 (v01 DELL QA09 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 6fecec04 000F4 (v03 NVIDIA MCP79 06040000 PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 6fec56c1 094CF (v01 NVIDIA MCP79 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 6fee4fc0 00040
[ 0.000000] ACPI: MCFG 6fececf8 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 6feced34 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 6feced6c 00072 (v01 PTLTD APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 6fecedde 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 6fecee06 00176 (v01 DELL QA09 06040000 LTP 00000000)
[ 0.000000] ACPI: OSFR 6fecef7c 00084 (v01 DELL DELL 06040000 ASL 00000061)
[ 0.000000] ACPI: SSDT 6fec5462 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6fec53bc 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6fec5316 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6fec5270 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6fec51ca 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6fec5124 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6fec507e 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6fec4fd8 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6fec3bd3 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 902MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008544b4] TEXT DATA BSS ==> [0000100000 - 00008544b4]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [0000855000 - 0000858130] BRK ==> [0000855000 - 0000858130]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [0000859000 - 0000fca6d5] NEW RAMDISK ==> [0000859000 - 0000fca6d5]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f7b50] f7b50
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0006fec0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0006fec0
[ 0.000000] On node 0 totalpages: 458329
[ 0.000000] free_area_init_node: node 0, pgdat c0725d40, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3961 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1806 pages used for memmap
[ 0.000000] HighMem zone: 229300 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10dea301 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages at c1e07000, static data 25628 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454747
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-5-generic root=UUID=43180eb4-fa9a-4157-95c2-3bf4eabb45aa ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2399.932 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 9168640 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Initializing HighMem for node 0 (000377fe:0006fec0)
[ 0.004000] Memory: 1793068k/1833728k available (4351k kernel code, 39392k reserved, 1994k data, 516k init, 924424k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.004000] .init : 0xc073b000 - 0xc07bc000 ( 516 kB)
[ 0.004000] .data : 0xc053fcce - 0xc0732708 (1994 kB)
[ 0.004000] .text : 0xc0100000 - 0xc053fcce (4351 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.86 BogoMIPS (lpj=9599728)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.018165] ACPI: Core revision 20090320
[ 0.032429] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072558] CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4799.98 BogoMIPS (lpj=9599973)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.160583] CPU1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06
[ 0.160600] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164018] Brought up 2 CPUs
[ 0.164020] Total of 2 processors activated (9599.85 BogoMIPS).
[ 0.164087] CPU0 attaching sched-domain:
[ 0.164089] domain 0: span 0-1 level MC
[ 0.164091] groups: 0 1
[ 0.164096] CPU1 attaching sched-domain:
[ 0.164098] domain 0: span 0-1 level MC
[ 0.164100] groups: 1 0
[ 0.164162] net_namespace: 1056 bytes
[ 0.164162] Booting paravirtualized kernel on bare hardware
[ 0.164162] regulator: core version 0.5
[ 0.164162] Time: 20:31:08 Date: 05/19/09
[ 0.164162] NET: Registered protocol family 16
[ 0.164162] EISA bus registered
[ 0.164162] ACPI: bus type pci registered
[ 0.164162] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 7
[ 0.164162] PCI: MCFG area at e0000000 reserved in E820
[ 0.164162] PCI: Using MMCONFIG for extended config space
[ 0.164162] PCI: Using configuration type 1 for base access
[ 0.168030] bio: create slab <bio-0> at 0
[ 0.169076] ACPI: EC: Look up EC in DSDT
[ 0.175055] ACPI: Interpreter enabled
[ 0.175059] ACPI: (supports S0 S3 S4 S5)
[ 0.175075] ACPI: Using IOAPIC for interrupt routing
[ 0.177165] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.192128] ACPI: EC: GPE = 0x47, I/O: command/status = 0x66, data = 0x62
[ 0.192128] ACPI: EC: driver started in interrupt mode
[ 0.192317] ACPI: No dock devices found.
[ 0.192444] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.192467] pci 0000:00:03.0: reg 10 io port: [0x1c00-0x1cff]
[ 0.192467] pci 0000:00:03.2: reg 10 io port: [0x3080-0x30bf]
[ 0.192467] pci 0000:00:03.2: reg 20 io port: [0x3040-0x307f]
[ 0.192467] pci 0000:00:03.2: reg 24 io port: [0x2000-0x203f]
[ 0.192467] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.192467] pci 0000:00:03.2: PME# disabled
[ 0.192481] pci 0000:00:03.5: reg 10 32bit mmio: [0xf0600000-0xf067ffff]
[ 0.192570] pci 0000:00:04.0: reg 10 32bit mmio: [0xf0886000-0xf0886fff]
[ 0.192600] pci 0000:00:04.0: supports D1 D2
[ 0.192602] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192605] pci 0000:00:04.0: PME# disabled
[ 0.192632] pci 0000:00:04.1: reg 10 32bit mmio: [0xf0889000-0xf08890ff]
[ 0.192667] pci 0000:00:04.1: supports D1 D2
[ 0.192668] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192672] pci 0000:00:04.1: PME# disabled
[ 0.192703] pci 0000:00:06.0: reg 10 32bit mmio: [0xf0887000-0xf0887fff]
[ 0.192732] pci 0000:00:06.0: supports D1 D2
[ 0.192734] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192737] pci 0000:00:06.0: PME# disabled
[ 0.192765] pci 0000:00:06.1: reg 10 32bit mmio: [0xf0889400-0xf08894ff]
[ 0.192800] pci 0000:00:06.1: supports D1 D2
[ 0.192801] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192805] pci 0000:00:06.1: PME# disabled
[ 0.192836] pci 0000:00:08.0: reg 10 32bit mmio: [0xf0880000-0xf0883fff]
[ 0.192865] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.192869] pci 0000:00:08.0: PME# disabled
[ 0.192923] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf0888000-0xf0888fff]
[ 0.192927] pci 0000:00:0a.0: reg 14 io port: [0x30d0-0x30d7]
[ 0.192932] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf0889c00-0xf0889cff]
[ 0.192936] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf0889800-0xf088980f]
[ 0.192957] pci 0000:00:0a.0: supports D1 D2
[ 0.192959] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192963] pci 0000:00:0a.0: PME# disabled
[ 0.192989] pci 0000:00:0b.0: reg 10 io port: [0x30e8-0x30ef]
[ 0.192994] pci 0000:00:0b.0: reg 14 io port: [0x30dc-0x30df]
[ 0.192998] pci 0000:00:0b.0: reg 18 io port: [0x30e0-0x30e7]
[ 0.193002] pci 0000:00:0b.0: reg 1c io port: [0x30d8-0x30db]
[ 0.193006] pci 0000:00:0b.0: reg 20 io port: [0x30c0-0x30cf]
[ 0.193011] pci 0000:00:0b.0: reg 24 32bit mmio: [0xf0884000-0xf0885fff]
[ 0.193218] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193225] pci 0000:00:0c.0: PME# disabled
[ 0.193293] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193296] pci 0000:00:10.0: PME# disabled
[ 0.193491] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193499] pci 0000:00:15.0: PME# disabled
[ 0.193715] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193722] pci 0000:00:16.0: PME# disabled
[ 0.193938] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193946] pci 0000:00:17.0: PME# disabled
[ 0.196211] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196219] pci 0000:00:18.0: PME# disabled
[ 0.196292] pci 0000:01:07.0: reg 10 32bit mmio: [0xf0500000-0xf05007ff]
[ 0.196331] pci 0000:01:07.0: supports D1 D2
[ 0.196332] pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196336] pci 0000:01:07.0: PME# disabled
[ 0.196364] pci 0000:01:07.1: reg 10 32bit mmio: [0xf0500800-0xf05008ff]
[ 0.196403] pci 0000:01:07.1: supports D1 D2
[ 0.196404] pci 0000:01:07.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196408] pci 0000:01:07.1: PME# disabled
[ 0.196436] pci 0000:01:07.2: reg 10 32bit mmio: [0xf0500c00-0xf0500cff]
[ 0.196475] pci 0000:01:07.2: supports D1 D2
[ 0.196476] pci 0000:01:07.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196480] pci 0000:01:07.2: PME# disabled
[ 0.196508] pci 0000:01:07.3: reg 10 32bit mmio: [0xf0501000-0xf05010ff]
[ 0.196547] pci 0000:01:07.3: supports D1 D2
[ 0.196548] pci 0000:01:07.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196552] pci 0000:01:07.3: PME# disabled
[ 0.196580] pci 0000:01:07.4: reg 10 32bit mmio: [0xf0501400-0xf05014ff]
[ 0.196619] pci 0000:01:07.4: supports D1 D2
[ 0.196620] pci 0000:01:07.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196624] pci 0000:01:07.4: PME# disabled
[ 0.196660] pci 0000:00:09.0: transparent bridge
[ 0.196664] pci 0000:00:09.0: bridge 32bit mmio: [0xf0500000-0xf05fffff]
[ 0.196722] pci 0000:02:00.0: reg 10 32bit mmio: [0xae000000-0xaeffffff]
[ 0.196738] pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.196755] pci 0000:02:00.0: reg 1c 64bit mmio: [0xac000000-0xadffffff]
[ 0.196767] pci 0000:02:00.0: reg 24 io port: [0x4000-0x407f]
[ 0.196778] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.196873] pci 0000:00:0c.0: bridge io port: [0x4000-0x4fff]
[ 0.196881] pci 0000:00:0c.0: bridge 32bit mmio: [0xac000000-0xaeffffff]
[ 0.196895] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.196930] pci 0000:03:00.0: reg 10 32bit mmio: [0xaa000000-0xaaffffff]
[ 0.196939] pci 0000:03:00.0: reg 14 64bit mmio: [0xb0000000-0xbfffffff]
[ 0.196947] pci 0000:03:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff]
[ 0.196952] pci 0000:03:00.0: reg 24 io port: [0x5000-0x507f]
[ 0.196958] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.197010] pci 0000:00:10.0: bridge io port: [0x5000-0x5fff]
[ 0.197013] pci 0000:00:10.0: bridge 32bit mmio: [0xaa000000-0xaaffffff]
[ 0.197017] pci 0000:00:10.0: bridge 64bit mmio pref: [0xb0000000-0xcdffffff]
[ 0.197076] pci 0000:00:15.0: bridge io port: [0x6000-0x6fff]
[ 0.197084] pci 0000:00:15.0: bridge 32bit mmio: [0xf0200000-0xf03fffff]
[ 0.197098] pci 0000:00:15.0: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
[ 0.197173] pci 0000:06:00.0: reg 10 64bit mmio: [0xf0400000-0xf0403fff]
[ 0.197251] pci 0000:06:00.0: supports D1 D2
[ 0.197253] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.197258] pci 0000:06:00.0: PME# disabled
[ 0.197336] pci 0000:00:16.0: bridge 32bit mmio: [0xf0400000-0xf04fffff]
[ 0.197571] pci_bus 0000:00: on NUMA node 0
[ 0.197576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.197754] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.197768] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.260469] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11 14 15)
[ 0.260469] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)
[ 0.260655] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.260883] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.261114] ACPI: PCI Interrupt Link [Z00Q] (IRQs 18 19 20 21 22 23) *11
[ 0.261343] ACPI: PCI Interrupt Link [Z00R] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.261571] ACPI: PCI Interrupt Link [Z00S] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.261800] ACPI: PCI Interrupt Link [Z00T] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.262028] ACPI: PCI Interrupt Link [Z00U] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.262256] ACPI: PCI Interrupt Link [Z00V] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.262484] ACPI: PCI Interrupt Link [Z00W] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.262712] ACPI: PCI Interrupt Link [Z00X] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.262941] ACPI: PCI Interrupt Link [Z00Y] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.264230] ACPI: PCI Interrupt Link [Z00Z] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.264458] ACPI: PCI Interrupt Link [Z010] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.264687] ACPI: PCI Interrupt Link [Z011] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.264914] ACPI: PCI Interrupt Link [Z012] (IRQs 18 19 20 21 22 23) *10
[ 0.265142] ACPI: PCI Interrupt Link [Z013] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.265370] ACPI: PCI Interrupt Link [Z014] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.265598] ACPI: PCI Interrupt Link [Z015] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.265827] ACPI: PCI Interrupt Link [Z016] (IRQs 18 19 20 21 22 23) *11
[ 0.266054] ACPI: PCI Interrupt Link [Z017] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.266283] ACPI: PCI Interrupt Link [Z018] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.266511] ACPI: PCI Interrupt Link [Z019] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.266739] ACPI: PCI Interrupt Link [Z01A] (IRQs 18 19 20 21 22 23) *10
[ 0.266967] ACPI: PCI Interrupt Link [Z01B] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.267195] ACPI: PCI Interrupt Link [Z01C] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.267423] ACPI: PCI Interrupt Link [Z01D] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.267652] ACPI: PCI Interrupt Link [Z01E] (IRQs 18 19 20 21 22 23) *11
[ 0.267880] ACPI: PCI Interrupt Link [Z01F] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.268119] ACPI: PCI Interrupt Link [Z01G] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.268348] ACPI: PCI Interrupt Link [Z01H] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.268576] ACPI: PCI Interrupt Link [LSMB] (IRQs 18 19 20 21 22 23) *10
[ 0.268802] ACPI: PCI Interrupt Link [LUS0] (IRQs 18 19 20 21 22 23) *7
[ 0.269032] ACPI: PCI Interrupt Link [LUS2] (IRQs 18 19 20 21 22 23) *11
[ 0.269260] ACPI: PCI Interrupt Link [LMAC] (IRQs 18 19 20 21 22 23) *10
[ 0.269487] ACPI: PCI Interrupt Link [LAZA] (IRQs 17) *11
[ 0.269712] ACPI: PCI Interrupt Link [LGPU] (IRQs 18 19 20 21 22 23) *5
[ 0.269939] ACPI: PCI Interrupt Link [LPID] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.270167] ACPI: PCI Interrupt Link [LSI0] (IRQs 18 19 20 21 22 23) *11
[ 0.270396] ACPI: PCI Interrupt Link [LSI1] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.270625] ACPI: PCI Interrupt Link [Z00O] (IRQs 18 19 20 21 22 23) *5
[ 0.270855] ACPI: PCI Interrupt Link [Z00P] (IRQs 18 19 20 21 22 23) *10
[ 0.271083] ACPI: PCI Interrupt Link [LPMU] (IRQs 18 19 20 21 22 23) *10
[ 0.271145] SCSI subsystem initialized
[ 0.271145] libata version 3.00 loaded.
[ 0.271145] usbcore: registered new interface driver usbfs
[ 0.271145] usbcore: registered new interface driver hub
[ 0.271145] usbcore: registered new device driver usb
[ 0.272026] ACPI: WMI: Mapper loaded
[ 0.272026] PCI: Using ACPI for IRQ routing
[ 0.292006] Bluetooth: Core ver 2.15
[ 0.292019] NET: Registered protocol family 31
[ 0.292019] Bluetooth: HCI device and connection manager initialized
[ 0.292019] Bluetooth: HCI socket layer initialized
[ 0.292021] NET: Registered protocol family 8
[ 0.292023] NET: Registered protocol family 20
[ 0.292036] NetLabel: Initializing
[ 0.292036] NetLabel: domain hash size = 128
[ 0.292036] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.292036] NetLabel: unlabeled traffic allowed by default
[ 0.292036] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.292036] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.316007] pnp: PnP ACPI init
[ 0.316014] ACPI: bus type pnp registered
[ 0.317130] pnp 00:03: mem resource (0xf0600000-0xf0607fff) overlaps 0000:00:03.5 BAR 0 (0xf0600000-0xf067ffff), disabling
[ 0.321690] pnp: PnP ACPI: found 13 devices
[ 0.321692] ACPI: ACPI bus type pnp unregistered
[ 0.321695] PnPBIOS: Disabled by ACPI PNP
[ 0.321703] system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
[ 0.321706] system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.321709] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.321711] system 00:00: iomem range 0xfed00000-0xfed00fff has been reserved
[ 0.321719] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 0.321721] system 00:04: ioport range 0x1080-0x10ff has been reserved
[ 0.321723] system 00:04: ioport range 0x1400-0x147f has been reserved
[ 0.321726] system 00:04: ioport range 0x1480-0x14ff has been reserved
[ 0.321728] system 00:04: ioport range 0x1800-0x187f has been reserved
[ 0.321730] system 00:04: ioport range 0x1880-0x18ff has been reserved
[ 0.321736] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.321738] system 00:07: ioport range 0x910-0x911 has been reserved
[ 0.321741] system 00:07: ioport range 0x295-0x296 has been reserved
[ 0.356640] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.356642] pci 0000:00:09.0: IO window: disabled
[ 0.356646] pci 0000:00:09.0: MEM window: 0xf0500000-0xf05fffff
[ 0.356649] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.356656] pci 0000:02:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
[ 0.356658] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02
[ 0.356663] pci 0000:00:0c.0: IO window: 0x4000-0x4fff
[ 0.356673] pci 0000:00:0c.0: MEM window: 0xac000000-0xaeffffff
[ 0.356680] pci 0000:00:0c.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.356694] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
[ 0.356696] pci 0000:00:10.0: IO window: 0x5000-0x5fff
[ 0.356699] pci 0000:00:10.0: MEM window: 0xaa000000-0xaaffffff
[ 0.356702] pci 0000:00:10.0: PREFETCH window: 0x000000b0000000-0x000000cdffffff
[ 0.356706] pci 0000:00:15.0: PCI bridge, secondary bus 0000:04
[ 0.356711] pci 0000:00:15.0: IO window: 0x6000-0x6fff
[ 0.356721] pci 0000:00:15.0: MEM window: 0xf0200000-0xf03fffff
[ 0.356728] pci 0000:00:15.0: PREFETCH window: 0x000000f0000000-0x000000f01fffff
[ 0.356741] pci 0000:00:16.0: PCI bridge, secondary bus 0000:06
[ 0.356743] pci 0000:00:16.0: IO window: disabled
[ 0.356752] pci 0000:00:16.0: MEM window: 0xf0400000-0xf04fffff
[ 0.356760] pci 0000:00:16.0: PREFETCH window: disabled
[ 0.356772] pci 0000:00:17.0: PCI bridge, secondary bus 0000:07
[ 0.356774] pci 0000:00:17.0: IO window: disabled
[ 0.356783] pci 0000:00:17.0: MEM window: disabled
[ 0.356790] pci 0000:00:17.0: PREFETCH window: disabled
[ 0.356803] pci 0000:00:18.0: PCI bridge, secondary bus 0000:08
[ 0.356804] pci 0000:00:18.0: IO window: disabled
[ 0.356814] pci 0000:00:18.0: MEM window: disabled
[ 0.356821] pci 0000:00:18.0: PREFETCH window: disabled
[ 0.356838] pci 0000:00:09.0: setting latency timer to 64
[ 0.357173] ACPI: PCI Interrupt Link [Z00Q] enabled at IRQ 23
[ 0.357176] alloc irq_desc for 23 on cpu 0 node 0
[ 0.357178] alloc kstat_irqs on cpu 0 node 0
[ 0.357182] pci 0000:00:0c.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
[ 0.357191] pci 0000:00:0c.0: setting latency timer to 64
[ 0.357198] pci 0000:00:10.0: setting latency timer to 64
[ 0.357524] ACPI: PCI Interrupt Link [Z012] enabled at IRQ 22
[ 0.357527] alloc irq_desc for 22 on cpu 0 node 0
[ 0.357528] alloc kstat_irqs on cpu 0 node 0
[ 0.357532] pci 0000:00:15.0: PCI INT A -> Link[Z012] -> GSI 22 (level, low) -> IRQ 22
[ 0.357540] pci 0000:00:15.0: setting latency timer to 64
[ 0.357869] ACPI: PCI Interrupt Link [Z016] enabled at IRQ 21
[ 0.357872] alloc irq_desc for 21 on cpu 0 node 0
[ 0.357873] alloc kstat_irqs on cpu 0 node 0
[ 0.357877] pci 0000:00:16.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
[ 0.357885] pci 0000:00:16.0: setting latency timer to 64
[ 0.358214] ACPI: PCI Interrupt Link [Z01A] enabled at IRQ 20
[ 0.358216] alloc irq_desc for 20 on cpu 0 node 0
[ 0.358218] alloc kstat_irqs on cpu 0 node 0
[ 0.358221] pci 0000:00:17.0: PCI INT A -> Link[Z01A] -> GSI 20 (level, low) -> IRQ 20
[ 0.358229] pci 0000:00:17.0: setting latency timer to 64
[ 0.358559] ACPI: PCI Interrupt Link [Z01E] enabled at IRQ 19
[ 0.358561] alloc irq_desc for 19 on cpu 0 node 0
[ 0.358563] alloc kstat_irqs on cpu 0 node 0
[ 0.358566] pci 0000:00:18.0: PCI INT A -> Link[Z01E] -> GSI 19 (level, low) -> IRQ 19
[ 0.358574] pci 0000:00:18.0: setting latency timer to 64
[ 0.358580] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.358582] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.358585] pci_bus 0000:01: resource 1 mem: [0xf0500000-0xf05fffff]
[ 0.358587] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.358589] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.358591] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff]
[ 0.358593] pci_bus 0000:02: resource 1 mem: [0xac000000-0xaeffffff]
[ 0.358595] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.358598] pci_bus 0000:03: resource 0 io: [0x5000-0x5fff]
[ 0.358600] pci_bus 0000:03: resource 1 mem: [0xaa000000-0xaaffffff]
[ 0.358602] pci_bus 0000:03: resource 2 pref mem [0xb0000000-0xcdffffff]
[ 0.358604] pci_bus 0000:04: resource 0 io: [0x6000-0x6fff]
[ 0.358606] pci_bus 0000:04: resource 1 mem: [0xf0200000-0xf03fffff]
[ 0.358608] pci_bus 0000:04: resource 2 pref mem [0xf0000000-0xf01fffff]
[ 0.358611] pci_bus 0000:06: resource 1 mem: [0xf0400000-0xf04fffff]
[ 0.358636] NET: Registered protocol family 2
[ 0.404051] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.404290] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.404622] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.404792] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.404794] TCP reno registered
[ 0.416057] NET: Registered protocol family 1
[ 0.416098] Trying to unpack rootfs image as initramfs...
[ 0.500628] Switched to high resolution mode on CPU 1
[ 0.504008] Switched to high resolution mode on CPU 0
[ 0.574794] Freeing initrd memory: 7621k freed
[ 0.578196] Simple Boot Flag at 0x36 set to 0x1
[ 0.578516] cpufreq-nforce2: No nForce2 chipset.
[ 0.578607] Scanning for low memory corruption every 60 seconds
[ 0.578802] audit: initializing netlink socket (disabled)
[ 0.578815] type=2000 audit(1242765067.577:1): initialized
[ 0.585449] highmem bounce pool size: 64 pages
[ 0.585454] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.587682] VFS: Disk quotas dquot_6.5.2
[ 0.587754] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.588549] fuse init (API version 7.11)
[ 0.588691] msgmni has been set to 1713
[ 0.588878] alg: No test for stdrng (krng)
[ 0.588886] io scheduler noop registered
[ 0.588888] io scheduler anticipatory registered
[ 0.588890] io scheduler deadline registered
[ 0.588949] io scheduler cfq registered (default)
[ 0.589227] pci 0000:03:00.0: Boot video device
[ 0.589549] alloc irq_desc for 24 on cpu 0 node 0
[ 0.589552] alloc kstat_irqs on cpu 0 node 0
[ 0.589571] pcieport-driver 0000:00:0c.0: irq 24 for MSI/MSI-X
[ 0.589612] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 0.590013] alloc irq_desc for 25 on cpu 0 node 0
[ 0.590015] alloc kstat_irqs on cpu 0 node 0
[ 0.590032] pcieport-driver 0000:00:15.0: irq 25 for MSI/MSI-X
[ 0.590072] pcieport-driver 0000:00:15.0: setting latency timer to 64
[ 0.590462] alloc irq_desc for 26 on cpu 0 node 0
[ 0.590463] alloc kstat_irqs on cpu 0 node 0
[ 0.590480] pcieport-driver 0000:00:16.0: irq 26 for MSI/MSI-X
[ 0.590520] pcieport-driver 0000:00:16.0: setting latency timer to 64
[ 0.590911] alloc irq_desc for 27 on cpu 0 node 0
[ 0.590912] alloc kstat_irqs on cpu 0 node 0
[ 0.590929] pcieport-driver 0000:00:17.0: irq 27 for MSI/MSI-X
[ 0.590969] pcieport-driver 0000:00:17.0: setting latency timer to 64
[ 0.591359] alloc irq_desc for 28 on cpu 0 node 0
[ 0.591360] alloc kstat_irqs on cpu 0 node 0
[ 0.591377] pcieport-driver 0000:00:18.0: irq 28 for MSI/MSI-X
[ 0.591417] pcieport-driver 0000:00:18.0: setting latency timer to 64
[ 0.591639] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.591722] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.592983] ACPI: AC Adapter [ADP0] (on-line)
[ 0.593334] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.593337] ACPI: Power Button [PWRF]
[ 0.593400] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.593402] ACPI: Power Button [PWRB]
[ 0.593700] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2a/PNP0C0E:00/input/input2
[ 0.593702] ACPI: Sleep Button [SLPB]
[ 0.593768] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 0.595193] ACPI: Lid Switch [LID]
[ 0.596198] ACPI: SSDT 6fee1086 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.596990] ACPI: SSDT 6fee1648 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.598765] Monitor-Mwait will be used to enter C-1 state
[ 0.598791] Monitor-Mwait will be used to enter C-2 state
[ 0.598810] Monitor-Mwait will be used to enter C-3 state
[ 0.598817] Marking TSC unstable due to TSC halts in idle
[ 0.598856] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.598896] processor ACPI_CPU:00: registered as cooling_device0
[ 0.598899] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.599257] ACPI: SSDT 6fee0ed6 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.599640] ACPI: SSDT 6fee15c3 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.600456] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.600495] processor ACPI_CPU:01: registered as cooling_device1
[ 0.600499] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.608280] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.608287] ACPI: Thermal Zone [THRM] (59 C)
[ 0.608677] isapnp: Scanning for PnP cards...
[ 0.961613] isapnp: No Plug & Play device found
[ 0.965894] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.967878] brd: module loaded
[ 0.968610] loop: module loaded
[ 0.968783] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.968834] Driver 'sd' needs updating - please use bus_type methods
[ 0.968871] Driver 'sr' needs updating - please use bus_type methods
[ 0.968959] ahci 0000:00:0b.0: version 3.0
[ 0.969304] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18
[ 0.969307] alloc irq_desc for 18 on cpu 0 node 0
[ 0.969309] alloc kstat_irqs on cpu 0 node 0
[ 0.969314] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 18 (level, low) -> IRQ 18
[ 0.969344] alloc irq_desc for 29 on cpu 0 node 0
[ 0.969346] alloc kstat_irqs on cpu 0 node 0
[ 0.969352] ahci 0000:00:0b.0: irq 29 for MSI/MSI-X
[ 0.969414] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.969417] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part
[ 0.969420] ahci 0000:00:0b.0: setting latency timer to 64
[ 0.969762] scsi0 : ahci
[ 0.969898] scsi1 : ahci
[ 0.970002] scsi2 : ahci
[ 0.970109] scsi3 : ahci
[ 0.970210] scsi4 : ahci
[ 0.970312] scsi5 : ahci
[ 0.970471] ata1: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884100 irq 29
[ 0.970473] ata2: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884180 irq 29
[ 0.970476] ata3: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884200 irq 29
[ 0.970478] ata4: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884280 irq 29
[ 0.970480] ata5: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884300 irq 29
[ 0.970482] ata6: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884380 irq 29
[ 0.973293] Fixed MDIO Bus: probed
[ 0.973298] PPP generic driver version 2.4.2
[ 0.973481] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.974016] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
[ 0.974019] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, low) -> IRQ 23
[ 0.974030] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.974032] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.974138] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.974161] ehci_hcd 0000:00:04.1: debug port 1
[ 0.974165] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 0.974178] ehci_hcd 0000:00:04.1: irq 23, io mem 0xf0889000
[ 0.988010] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.988100] usb usb1: configuration #1 chosen from 1 choice
[ 0.988153] hub 1-0:1.0: USB hub found
[ 0.988160] hub 1-0:1.0: 4 ports detected
[ 0.988641] ACPI: PCI Interrupt Link [Z00P] enabled at IRQ 22
[ 0.988645] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 22 (level, low) -> IRQ 22
[ 0.988652] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 0.988654] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 0.988745] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 0.988764] ehci_hcd 0000:00:06.1: debug port 1
[ 0.988768] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported
[ 0.988780] ehci_hcd 0000:00:06.1: irq 22, io mem 0xf0889400
[ 1.000016] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 1.000095] usb usb2: configuration #1 chosen from 1 choice
[ 1.000144] hub 2-0:1.0: USB hub found
[ 1.000150] hub 2-0:1.0: 3 ports detected
[ 1.000303] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.000645] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
[ 1.000648] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, low) -> IRQ 21
[ 1.000655] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 1.000658] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 1.000749] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 1.000767] ohci_hcd 0000:00:04.0: irq 21, io mem 0xf0886000
[ 1.054079] usb usb3: configuration #1 chosen from 1 choice
[ 1.054128] hub 3-0:1.0: USB hub found
[ 1.054136] hub 3-0:1.0: 4 ports detected
[ 1.054581] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 20
[ 1.054585] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 20 (level, low) -> IRQ 20
[ 1.054592] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 1.054595] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.054685] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 1.054702] ohci_hcd 0000:00:06.0: irq 20, io mem 0xf0887000
[ 1.093840] ACPI: Battery Slot [BAT0] (battery present)
[ 1.110073] usb usb4: configuration #1 chosen from 1 choice
[ 1.110122] hub 4-0:1.0: USB hub found
[ 1.110129] hub 4-0:1.0: 3 ports detected
[ 1.110272] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.110406] usbcore: registered new interface driver usbserial
[ 1.110446] USB Serial support registered for generic
[ 1.110487] usbcore: registered new interface driver usbserial_generic
[ 1.110489] usbserial: USB Serial Driver core
[ 1.110585] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.116090] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.116095] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.116233] mice: PS/2 mouse device common for all mice
[ 1.116496] rtc_cmos 00:0a: RTC can wake from S4
[ 1.116548] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
[ 1.116595] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.116752] device-mapper: uevent: version 1.0.3
[ 1.116874] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 1.116944] device-mapper: multipath: version 1.0.5 loaded
[ 1.116946] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.117073] EISA: Probing bus 0 at eisa.0
[ 1.117078] Cannot allocate resource for EISA slot 1
[ 1.117080] Cannot allocate resource for EISA slot 2
[ 1.117082] Cannot allocate resource for EISA slot 3
[ 1.117084] Cannot allocate resource for EISA slot 4
[ 1.117085] Cannot allocate resource for EISA slot 5
[ 1.117087] Cannot allocate resource for EISA slot 6
[ 1.117093] EISA: Detected 0 cards.
[ 1.117459] cpuidle: using governor ladder
[ 1.117975] cpuidle: using governor menu
[ 1.118535] TCP cubic registered
[ 1.118848] NET: Registered protocol family 10
[ 1.119214] lo: Disabled Privacy Extensions
[ 1.119268] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.119482] NET: Registered protocol family 17
[ 1.119531] Bluetooth: L2CAP ver 2.13
[ 1.119533] Bluetooth: L2CAP socket layer initialized
[ 1.119535] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.119536] Bluetooth: SCO socket layer initialized
[ 1.119567] Bluetooth: RFCOMM socket layer initialized
[ 1.119571] Bluetooth: RFCOMM TTY layer initialized
[ 1.119572] Bluetooth: RFCOMM ver 1.11
[ 1.120060] Using IPI No-Shortcut mode
[ 1.120211] PM: Resume from disk failed.
[ 1.120222] registered taskstats version 1
[ 1.120333] Magic number: 9:22:549
[ 1.120368] pci_link PNP0C0F:00: hash matches
[ 1.120379] processor ACPI_CPU:04: hash matches
[ 1.120443] rtc_cmos 00:0a: setting system clock to 2009-05-19 20:31:09 UTC (1242765069)
[ 1.120446] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.120447] EDD information not available.
[ 1.288119] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.288151] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.288167] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.288191] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.428052] usb 2-3: new high speed USB device using ehci_hcd and address 2
[ 1.452059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.452072] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.456544] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS20N, A106, max UDMA/133
[ 1.461354] ata2.00: configured for UDMA/133
[ 1.495270] ata1.00: ATA-8: TOSHIBA MK3252GSX, LV011D, max UDMA/100
[ 1.495274] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.496182] ata1.00: configured for UDMA/100
[ 1.496272] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5
[ 1.496667] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 1.496681] sd 0:0:0:0: [sda] Write Protect is off
[ 1.496683] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.496702] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.496785] sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.499842] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS20N A106 PQ: 0 ANSI: 5
[ 1.504039] Clocksource tsc unstable (delta = -157210374 ns)
[ 1.510969] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[ 1.510973] Uniform CD-ROM driver Revision: 3.20
[ 1.511278] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.511410] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.545953] sda1 sda2 sda3 sda4 <<6>usb 2-3: configuration #1 chosen from 1 choice
[ 1.573354] sda5 >
[ 1.574127] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.574153] Freeing unused kernel memory: 516k freed
[ 1.574420] Write protecting the kernel text: 4352k
[ 1.574455] Write protecting the kernel read-only data: 1720k
[ 1.830288] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.830673] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 19
[ 1.830678] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 19 (level, low) -> IRQ 19
[ 1.830684] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.949177] usb 3-4: new full speed USB device using ohci_hcd and address 2
[ 1.951784] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[ 1.951794] ohci1394 0000:01:07.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
[ 1.985956] b43-pci-bridge 0000:06:00.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
[ 1.985966] b43-pci-bridge 0000:06:00.0: setting latency timer to 64
[ 2.006034] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[f0500000-f05007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 2.033085] ssb: ERROR: PLL init unknown for device 4322
[ 2.033089] ssb: ERROR: PMU resource config unknown for device 4322
[ 2.061103] ssb: Sonics Silicon Backplane found on PCI device 0000:06:00.0
[ 2.169091] usb 3-4: configuration #1 chosen from 1 choice
[ 2.172047] hub 3-4:1.0: USB hub found
[ 2.175019] hub 3-4:1.0: 3 ports detected
[ 2.353885] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 0, addr 00:21:70:8f:69:67
[ 2.353889] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
[ 2.419378] PM: Starting manual resume from disk
[ 2.419381] PM: Resume from partition 8:5
[ 2.419382] PM: Checking hibernation image.
[ 2.419510] PM: Resume from disk failed.
[ 2.475523] kjournald starting. Commit interval 5 seconds
[ 2.475534] EXT3-fs: mounted filesystem with writeback data mode.
[ 2.494034] usb 3-4.1: new full speed USB device using ohci_hcd and address 3
[ 2.605121] usb 3-4.1: configuration #1 chosen from 1 choice
[ 2.686042] usb 3-4.2: new full speed USB device using ohci_hcd and address 4
[ 2.798109] usb 3-4.2: configuration #1 chosen from 1 choice
[ 3.280460] ieee1394: Host added: ID:BUS[0-00:1023] GUID[6d4fc0004b76deff]
[ 8.361389] udev: starting version 142
[ 8.526272] usbcore: registered new interface driver hiddev
[ 8.531262] input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input6
[ 8.531328] generic-usb 0003:413C:8157.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0
[ 8.537332] input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input7
[ 8.537408] generic-usb 0003:413C:8158.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0
[ 8.537429] usbcore: registered new interface driver usbhid
[ 8.537432] usbhid: v2.6:USB HID core driver
[ 8.596511] Linux agpgart interface v0.103
[ 8.637255] Linux video capture interface: v2.00
[ 8.658613] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.669151] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 8.682152] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
[ 8.682167] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2000
[ 8.818019] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 8.819372] sdhci: Secure Digital Host Controller Interface driver
[ 8.819374] sdhci: Copyright(c) Pierre Ossman
[ 8.820673] sdhci-pci 0000:01:07.1: SDHCI controller found [1180:0822] (rev 22)
[ 8.821047] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
[ 8.821052] sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
[ 8.821071] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 8.821101] Registered led device: mmc0::
[ 8.821137] mmc0: SDHCI controller on PCI [0000:01:07.1] using DMA
[ 8.821797] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 8.821799] ricoh-mmc: Copyright(c) Philip Langdale
[ 8.821815] ricoh-mmc: Ricoh MMC controller found at 0000:01:07.2 [1180:0843] (rev 12)
[ 8.821829] ricoh-mmc: Controller is now disabled.
[ 8.825688] uvcvideo: Found UVC 1.00 device Integrated Webcam (05ca:18a3)
[ 8.827260] input: Integrated Webcam as /devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.0/input/input9
[ 8.827303] usbcore: registered new interface driver uvcvideo
[ 8.827306] USB Video Class driver (v0.1.0)
[ 9.046045] usb 3-4.3: new full speed USB device using ohci_hcd and address 5
[ 9.123951] nvidia: module license 'NVIDIA' taints kernel.
[ 9.123955] Disabling lock debugging due to kernel taint
[ 9.207182] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/device:12/input/input10
[ 9.207221] ACPI: Video Device [Z01I] (multi-head: no rom: yes post: no)
[ 9.388796] nvidia 0000:02:00.0: enabling device (0004 -> 0007)
[ 9.388811] nvidia 0000:02:00.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
[ 9.388823] nvidia 0000:02:00.0: setting latency timer to 64
[ 9.389544] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 18
[ 9.389547] nvidia 0000:03:00.0: PCI INT A -> Link[LGPU] -> GSI 18 (level, low) -> IRQ 18
[ 9.389552] nvidia 0000:03:00.0: setting latency timer to 64
[ 9.389666] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 9.418142] usb 3-4.3: configuration #1 chosen from 1 choice
[ 9.441121] cfg80211: Calling CRDA to update world regulatory domain
[ 9.458734] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 9.458811] usbcore: registered new interface driver btusb
[ 9.628808] cfg80211: World regulatory domain updated:
[ 9.628811] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.628813] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.628816] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.628818] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.628820] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.628822] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.667752] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 9.668107] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
[ 9.668111] alloc irq_desc for 17 on cpu 0 node 0
[ 9.668113] alloc kstat_irqs on cpu 0 node 0
[ 9.668118] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
[ 9.668122] hda_intel: probe_mask set to 0x9 for device 1028:0271
[ 9.668150] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 9.785554] b43-phy0: Broadcom 4322 WLAN found (core revision 16)
[ 9.828120] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 8, Type 4, Revision 4)
[ 9.828148] b43: probe of ssb0:0 failed with error -95
[ 9.828186] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[ 9.943856] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
[ 9.991400] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 10.332107] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input12
[ 10.812124] input: HDA NVidia Mic at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/input/input13
[ 10.812209] input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/input/input14
[ 10.812255] input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/input/input15
[ 11.097536] lp: driver loaded but no devices found
[ 11.167418] Adding 1759076k swap on /dev/sda5. Priority:-1 extents:1 across:1759076k
[ 11.697224] EXT3 FS on sda3, internal journal
[ 15.113042] CE: hpet increasing min_delta_ns to 15000 nsec
[ 15.517366] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.517369] Bluetooth: BNEP filters: protocol multicast
[ 15.534986] Bridge firewalling registered
[ 17.163342] ppdev: user-space parallel port driver
[ 19.057870] IRQ 18/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
[ 20.625966] eth0: no link during initialization.
[ 20.626420] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.732733] IRQ 23/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
[ 20.739709] NVRM: RmInitAdapter failed! (0x31:0xffffffff:1018)
[ 20.739716] NVRM: rm_init_adapter(0) failed
[ 22.450065] eth0: link up.
[ 22.450857] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 32.832040] eth0: no IPv6 routers present
[ 35.112810] Too big adjustment 32
[ 35.161636] Too big adjustment 32
[ 35.186721] Too big adjustment 32
[ 35.201658] Too big adjustment 32
[ 35.226097] Too big adjustment 32
[ 35.273620] Too big adjustment 32
[ 35.305855] Too big adjustment 32
[ 43.455139] gvfs-gdu-volume[4462]: segfault at c ip 001e6fda sp bfdd7860 error 4 in libgdu.so.0.0.0[1de000+22000]
[ 45.199507] gvfs-gdu-volume[4479]: segfault at c ip 005b5fda sp bfce82b0 error 4 in libgdu.so.0.0.0[5ad000+22000]
[ 107.504482] PM: Syncing filesystems ... done.
[ 107.506244] PM: Preparing system for mem sleep
[ 107.506248] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 107.506733] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 107.506763] PM: Entering mem sleep
[ 107.506773] Suspending console(s) (use no_console_suspend to debug)
[ 107.507040] btusb_bulk_complete: hci0 urb f6b2a480 failed to resubmit (1)
[ 107.508091] btusb_bulk_complete: hci0 urb f6b2a200 failed to resubmit (1)
[ 107.509091] btusb_intr_complete: hci0 urb f6b2a280 failed to resubmit (1)
[ 107.596045] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 107.691561] sd 0:0:0:0: [sda] Stopping disk
[ 108.720443] b43-pci-bridge 0000:06:00.0: PCI INT A disabled
[ 108.736138] NVRM: RmPowerManagement: 4
[ 108.738308] ACPI handle has no context!
[ 108.738315] sdhci-pci 0000:01:07.1: PME# disabled
[ 108.738322] sdhci-pci 0000:01:07.1: PCI INT B disabled
[ 108.738327] ACPI handle has no context!
[ 108.756112] ACPI handle has no context!
[ 108.884426] forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
[ 108.884431] forcedeth 0000:00:0a.0: PME# disabled
[ 108.884434] forcedeth 0000:00:0a.0: PCI INT A disabled
[ 108.988050] HDA Intel 0000:00:08.0: PCI INT A disabled
[ 109.004225] HDA Intel 0000:00:08.0: power state changed by ACPI to D3
[ 109.004240] ehci_hcd 0000:00:06.1: PCI INT B disabled
[ 109.004265] ehci_hcd 0000:00:06.1: PME# disabled
[ 109.020114] ohci_hcd 0000:00:06.0: PCI INT A disabled
[ 109.020141] ohci_hcd 0000:00:06.0: PME# disabled
[ 109.036113] ehci_hcd 0000:00:04.1: PCI INT B disabled
[ 109.036144] ehci_hcd 0000:00:04.1: PME# disabled
[ 109.052114] ohci_hcd 0000:00:04.0: PCI INT A disabled
[ 109.052141] ohci_hcd 0000:00:04.0: PME# disabled
[ 109.068189] PM: suspend devices took 1.564 seconds
[ 109.068383] ricoh-mmc: Suspending.
[ 109.068389] ricoh-mmc: Controller is now re-enabled.
[ 109.069624] ACPI: Preparing to enter system sleep state S3
[ 109.069985] Disabling non-boot CPUs ...
[ 109.072236] CPU 1 is now offline
[ 109.072237] SMP alternatives: switching to UP code
[ 109.077233] CPU0 attaching NULL sched-domain.
[ 109.077236] CPU1 attaching NULL sched-domain.
[ 109.077241] CPU0 attaching NULL sched-domain.
[ 109.077365] CPU1 is down
[ 109.077434] Extended CMOS year: 2000
[ 109.077434] Back to C!
[ 109.077434] Extended CMOS year: 2000
[ 109.084299] Enabling non-boot CPUs ...
[ 109.084491] SMP alternatives: switching to SMP code
[ 109.089179] Booting processor 1 APIC 0x1 ip 0x6000
[ 109.077130] Initializing CPU#1
[ 109.077130] Calibrating delay using timer specific routine.. 4800.00 BogoMIPS (lpj=9600013)
[ 109.077130] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 109.077130] CPU: L2 cache: 3072K
[ 109.077130] CPU: Physical Processor ID: 0
[ 109.077130] CPU: Processor Core ID: 1
[ 109.180590] CPU1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06
[ 109.180657] CPU0 attaching NULL sched-domain.
[ 109.181016] Switched to high resolution mode on CPU 1
[ 109.196023] CPU0 attaching sched-domain:
[ 109.196026] domain 0: span 0-1 level MC
[ 109.196029] groups: 0 1
[ 109.196034] CPU1 attaching sched-domain:
[ 109.196036] domain 0: span 0-1 level MC
[ 109.196039] groups: 1 0
[ 109.197019] CPU1 is up
[ 109.197023] ACPI: Waking up from system sleep state S3
[ 109.197577] ohci_hcd 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
[ 109.197601] ehci_hcd 0000:00:04.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
[ 109.197624] ohci_hcd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
[ 109.197647] ehci_hcd 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
[ 109.197671] HDA Intel 0000:00:08.0: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
[ 109.197728] ahci 0000:00:0b.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00407)
[ 109.197843] pcieport-driver 0000:00:0c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 109.198043] pcieport-driver 0000:00:15.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 109.198209] pcieport-driver 0000:00:16.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1)
[ 109.198232] pcieport-driver 0000:00:16.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 109.198415] pcieport-driver 0000:00:17.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 109.198598] pcieport-driver 0000:00:18.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 109.198692] ohci1394 0000:01:07.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010a)
[ 109.198705] ohci1394 0000:01:07.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0500000)
[ 109.198709] ohci1394 0000:01:07.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[ 109.198714] ohci1394 0000:01:07.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[ 109.198729] sdhci-pci 0000:01:07.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 109.198742] sdhci-pci 0000:01:07.1: restoring config space at offset 0x4 (was 0x0, writing 0xf0500800)
[ 109.198746] sdhci-pci 0000:01:07.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[ 109.198751] sdhci-pci 0000:01:07.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[ 109.198765] ricoh-mmc 0000:01:07.2: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 109.198779] ricoh-mmc 0000:01:07.2: restoring config space at offset 0x4 (was 0x0, writing 0xf0500c00)
[ 109.198783] ricoh-mmc 0000:01:07.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[ 109.198788] ricoh-mmc 0000:01:07.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[ 109.198795] ricoh-mmc: Resuming.
[ 109.198801] ricoh-mmc: Controller is now disabled.
[ 109.198809] pci 0000:01:07.3: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 109.198822] pci 0000:01:07.3: restoring config space at offset 0x4 (was 0x0, writing 0xf0501400)
[ 109.198826] pci 0000:01:07.3: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[ 109.198831] pci 0000:01:07.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[ 109.212111] nvidia 0000:02:00.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100007)
[ 109.212155] nvidia 0000:03:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0)
[ 109.212191] b43-pci-bridge 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 109.212214] b43-pci-bridge 0000:06:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0400004)
[ 109.212220] b43-pci-bridge 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 109.212228] b43-pci-bridge 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[ 109.442070] nForce2_smbus 0000:00:03.2: PME# disabled
[ 109.442092] ohci_hcd 0000:00:04.0: PME# disabled
[ 109.442098] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, low) -> IRQ 21
[ 109.442102] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 109.442106] ohci_hcd 0000:00:04.0: PME# disabled
[ 109.464139] ehci_hcd 0000:00:04.1: PME# disabled
[ 109.464145] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, low) -> IRQ 23
[ 109.464151] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 109.464156] ehci_hcd 0000:00:04.1: PME# disabled
[ 109.464190] ohci_hcd 0000:00:06.0: PME# disabled
[ 109.464196] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 20 (level, low) -> IRQ 20
[ 109.464201] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 109.464206] ohci_hcd 0000:00:06.0: PME# disabled
[ 109.488139] ehci_hcd 0000:00:06.1: PME# disabled
[ 109.488145] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 22 (level, low) -> IRQ 22
[ 109.488150] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 109.488156] ehci_hcd 0000:00:06.1: PME# disabled
[ 109.488189] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
[ 109.488195] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 109.488223] pci 0000:00:09.0: setting latency timer to 64
[ 109.488253] forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
[ 109.488257] forcedeth 0000:00:0a.0: PME# disabled
[ 110.008371] ahci 0000:00:0b.0: setting latency timer to 64
[ 110.008450] pci 0000:00:10.0: setting latency timer to 64
[ 110.066070] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[f0500000-f05007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 110.072128] sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
[ 110.072131] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 110.072143] pci 0000:01:07.3: PME# disabled
[ 110.072146] pci 0000:01:07.4: PME# disabled
[ 110.073631] NVRM: RmPowerManagement: 5
[ 110.569066] ata3: SATA link down (SStatus 0 SControl 300)
[ 110.569105] ata4: SATA link down (SStatus 0 SControl 300)
[ 110.573041] ata6: SATA link down (SStatus 0 SControl 300)
[ 110.705065] ata5: SATA link down (SStatus 0 SControl 300)
[ 110.733060] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 110.742400] ata2.00: configured for UDMA/133
[ 110.747750] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[ 110.747752] ata2: irq_stat 0x40000001
[ 110.752236] b43-pci-bridge 0000:06:00.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
[ 110.756346] ata2.00: configured for UDMA/133
[ 110.756349] ata2: EH complete
[ 111.016116] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 111.017773] ata1.00: configured for UDMA/100
[ 111.017779] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[ 111.017781] ata1: irq_stat 0x00400040, connection status changed
[ 111.019396] ata1.00: configured for UDMA/100
[ 111.019398] ata1: EH complete
[ 111.236993] sd 0:0:0:0: [sda] Starting disk
[ 111.356035] usb 2-3: reset high speed USB device using ehci_hcd and address 2
[ 111.668045] usb 3-4: reset full speed USB device using ohci_hcd and address 2
[ 112.177152] usb 3-4.1: reset full speed USB device using ohci_hcd and address 3
[ 112.361151] usb 3-4.2: reset full speed USB device using ohci_hcd and address 4
[ 112.471157] pm_op(): usb_dev_resume+0x0/0x10 returns -19
[ 112.471160] PM: Device 3-4.3 failed to resume: error -19
[ 112.471373] PM: resume devices took 3.256 seconds
[ 112.471980] PM: Finishing wakeup.
[ 112.471982] Restarting tasks ... <6>usb 3-4.3: USB disconnect, address 5
[ 112.504314] btusb_send_frame: hci0 urb f4520700 submission failed
[ 112.537026] done.
[ 113.112944] alloc irq_desc for 30 on cpu 0 node 0
[ 113.112947] alloc kstat_irqs on cpu 0 node 0
[ 113.112959] forcedeth 0000:00:0a.0: irq 30 for MSI/MSI-X
[ 113.113177] eth0: no link during initialization.
[ 113.113635] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 114.902143] eth0: link up.
[ 114.903012] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 125.072042] eth0: no IPv6 routers present
[-- Attachment #1.3: dmesg_presuspend.txt --]
[-- Type: text/plain, Size: 55685 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-5-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.0-3ubuntu3) ) #6-Ubuntu SMP Mon May 11 19:56:30 UTC 2009 (Ubuntu 2.6.30-5.6-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000006fec0000 (usable)
[ 0.000000] BIOS-e820: 000000006fec0000 - 000000006fecf000 (ACPI data)
[ 0.000000] BIOS-e820: 000000006fecf000 - 000000006fee5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006fee5000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x6fec0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-DBFFF uncachable
[ 0.000000] DC000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009dc00 (usable)
[ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000006fec0000 (usable)
[ 0.000000] modified: 000000006fec0000 - 000000006fecf000 (ACPI data)
[ 0.000000] modified: 000000006fecf000 - 000000006fee5000 (ACPI NVS)
[ 0.000000] modified: 000000006fee5000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 3787e000 - 37fef6d5
[ 0.000000] Allocated new RAMDISK: 00859000 - 00fca6d5
[ 0.000000] Move RAMDISK from 000000003787e000 - 0000000037fef6d4 to 00859000 - 00fca6d4
[ 0.000000] ACPI: RSDP 000f7b20 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 6fec3b2f 000A4 (v01 DELL QA09 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 6fecec04 000F4 (v03 NVIDIA MCP79 06040000 PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 6fec56c1 094CF (v01 NVIDIA MCP79 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 6fee4fc0 00040
[ 0.000000] ACPI: MCFG 6fececf8 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 6feced34 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 6feced6c 00072 (v01 PTLTD APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 6fecedde 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 6fecee06 00176 (v01 DELL QA09 06040000 LTP 00000000)
[ 0.000000] ACPI: OSFR 6fecef7c 00084 (v01 DELL DELL 06040000 ASL 00000061)
[ 0.000000] ACPI: SSDT 6fec5462 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6fec53bc 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6fec5316 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6fec5270 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6fec51ca 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6fec5124 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6fec507e 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6fec4fd8 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 6fec3bd3 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 902MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008544b4] TEXT DATA BSS ==> [0000100000 - 00008544b4]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [0000855000 - 0000858130] BRK ==> [0000855000 - 0000858130]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [0000859000 - 0000fca6d5] NEW RAMDISK ==> [0000859000 - 0000fca6d5]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f7b50] f7b50
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0006fec0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0006fec0
[ 0.000000] On node 0 totalpages: 458329
[ 0.000000] free_area_init_node: node 0, pgdat c0725d40, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3961 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1806 pages used for memmap
[ 0.000000] HighMem zone: 229300 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10dea301 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages at c1e07000, static data 25628 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454747
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-5-generic root=UUID=43180eb4-fa9a-4157-95c2-3bf4eabb45aa ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2399.932 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 9168640 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Initializing HighMem for node 0 (000377fe:0006fec0)
[ 0.004000] Memory: 1793068k/1833728k available (4351k kernel code, 39392k reserved, 1994k data, 516k init, 924424k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.004000] .init : 0xc073b000 - 0xc07bc000 ( 516 kB)
[ 0.004000] .data : 0xc053fcce - 0xc0732708 (1994 kB)
[ 0.004000] .text : 0xc0100000 - 0xc053fcce (4351 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.86 BogoMIPS (lpj=9599728)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.018165] ACPI: Core revision 20090320
[ 0.032429] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072558] CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4799.98 BogoMIPS (lpj=9599973)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.160583] CPU1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06
[ 0.160600] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164018] Brought up 2 CPUs
[ 0.164020] Total of 2 processors activated (9599.85 BogoMIPS).
[ 0.164087] CPU0 attaching sched-domain:
[ 0.164089] domain 0: span 0-1 level MC
[ 0.164091] groups: 0 1
[ 0.164096] CPU1 attaching sched-domain:
[ 0.164098] domain 0: span 0-1 level MC
[ 0.164100] groups: 1 0
[ 0.164162] net_namespace: 1056 bytes
[ 0.164162] Booting paravirtualized kernel on bare hardware
[ 0.164162] regulator: core version 0.5
[ 0.164162] Time: 20:31:08 Date: 05/19/09
[ 0.164162] NET: Registered protocol family 16
[ 0.164162] EISA bus registered
[ 0.164162] ACPI: bus type pci registered
[ 0.164162] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 7
[ 0.164162] PCI: MCFG area at e0000000 reserved in E820
[ 0.164162] PCI: Using MMCONFIG for extended config space
[ 0.164162] PCI: Using configuration type 1 for base access
[ 0.168030] bio: create slab <bio-0> at 0
[ 0.169076] ACPI: EC: Look up EC in DSDT
[ 0.175055] ACPI: Interpreter enabled
[ 0.175059] ACPI: (supports S0 S3 S4 S5)
[ 0.175075] ACPI: Using IOAPIC for interrupt routing
[ 0.177165] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.192128] ACPI: EC: GPE = 0x47, I/O: command/status = 0x66, data = 0x62
[ 0.192128] ACPI: EC: driver started in interrupt mode
[ 0.192317] ACPI: No dock devices found.
[ 0.192444] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.192467] pci 0000:00:03.0: reg 10 io port: [0x1c00-0x1cff]
[ 0.192467] pci 0000:00:03.2: reg 10 io port: [0x3080-0x30bf]
[ 0.192467] pci 0000:00:03.2: reg 20 io port: [0x3040-0x307f]
[ 0.192467] pci 0000:00:03.2: reg 24 io port: [0x2000-0x203f]
[ 0.192467] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.192467] pci 0000:00:03.2: PME# disabled
[ 0.192481] pci 0000:00:03.5: reg 10 32bit mmio: [0xf0600000-0xf067ffff]
[ 0.192570] pci 0000:00:04.0: reg 10 32bit mmio: [0xf0886000-0xf0886fff]
[ 0.192600] pci 0000:00:04.0: supports D1 D2
[ 0.192602] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192605] pci 0000:00:04.0: PME# disabled
[ 0.192632] pci 0000:00:04.1: reg 10 32bit mmio: [0xf0889000-0xf08890ff]
[ 0.192667] pci 0000:00:04.1: supports D1 D2
[ 0.192668] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192672] pci 0000:00:04.1: PME# disabled
[ 0.192703] pci 0000:00:06.0: reg 10 32bit mmio: [0xf0887000-0xf0887fff]
[ 0.192732] pci 0000:00:06.0: supports D1 D2
[ 0.192734] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192737] pci 0000:00:06.0: PME# disabled
[ 0.192765] pci 0000:00:06.1: reg 10 32bit mmio: [0xf0889400-0xf08894ff]
[ 0.192800] pci 0000:00:06.1: supports D1 D2
[ 0.192801] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192805] pci 0000:00:06.1: PME# disabled
[ 0.192836] pci 0000:00:08.0: reg 10 32bit mmio: [0xf0880000-0xf0883fff]
[ 0.192865] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.192869] pci 0000:00:08.0: PME# disabled
[ 0.192923] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf0888000-0xf0888fff]
[ 0.192927] pci 0000:00:0a.0: reg 14 io port: [0x30d0-0x30d7]
[ 0.192932] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf0889c00-0xf0889cff]
[ 0.192936] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf0889800-0xf088980f]
[ 0.192957] pci 0000:00:0a.0: supports D1 D2
[ 0.192959] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192963] pci 0000:00:0a.0: PME# disabled
[ 0.192989] pci 0000:00:0b.0: reg 10 io port: [0x30e8-0x30ef]
[ 0.192994] pci 0000:00:0b.0: reg 14 io port: [0x30dc-0x30df]
[ 0.192998] pci 0000:00:0b.0: reg 18 io port: [0x30e0-0x30e7]
[ 0.193002] pci 0000:00:0b.0: reg 1c io port: [0x30d8-0x30db]
[ 0.193006] pci 0000:00:0b.0: reg 20 io port: [0x30c0-0x30cf]
[ 0.193011] pci 0000:00:0b.0: reg 24 32bit mmio: [0xf0884000-0xf0885fff]
[ 0.193218] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193225] pci 0000:00:0c.0: PME# disabled
[ 0.193293] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193296] pci 0000:00:10.0: PME# disabled
[ 0.193491] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193499] pci 0000:00:15.0: PME# disabled
[ 0.193715] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193722] pci 0000:00:16.0: PME# disabled
[ 0.193938] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193946] pci 0000:00:17.0: PME# disabled
[ 0.196211] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196219] pci 0000:00:18.0: PME# disabled
[ 0.196292] pci 0000:01:07.0: reg 10 32bit mmio: [0xf0500000-0xf05007ff]
[ 0.196331] pci 0000:01:07.0: supports D1 D2
[ 0.196332] pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196336] pci 0000:01:07.0: PME# disabled
[ 0.196364] pci 0000:01:07.1: reg 10 32bit mmio: [0xf0500800-0xf05008ff]
[ 0.196403] pci 0000:01:07.1: supports D1 D2
[ 0.196404] pci 0000:01:07.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196408] pci 0000:01:07.1: PME# disabled
[ 0.196436] pci 0000:01:07.2: reg 10 32bit mmio: [0xf0500c00-0xf0500cff]
[ 0.196475] pci 0000:01:07.2: supports D1 D2
[ 0.196476] pci 0000:01:07.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196480] pci 0000:01:07.2: PME# disabled
[ 0.196508] pci 0000:01:07.3: reg 10 32bit mmio: [0xf0501000-0xf05010ff]
[ 0.196547] pci 0000:01:07.3: supports D1 D2
[ 0.196548] pci 0000:01:07.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196552] pci 0000:01:07.3: PME# disabled
[ 0.196580] pci 0000:01:07.4: reg 10 32bit mmio: [0xf0501400-0xf05014ff]
[ 0.196619] pci 0000:01:07.4: supports D1 D2
[ 0.196620] pci 0000:01:07.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196624] pci 0000:01:07.4: PME# disabled
[ 0.196660] pci 0000:00:09.0: transparent bridge
[ 0.196664] pci 0000:00:09.0: bridge 32bit mmio: [0xf0500000-0xf05fffff]
[ 0.196722] pci 0000:02:00.0: reg 10 32bit mmio: [0xae000000-0xaeffffff]
[ 0.196738] pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.196755] pci 0000:02:00.0: reg 1c 64bit mmio: [0xac000000-0xadffffff]
[ 0.196767] pci 0000:02:00.0: reg 24 io port: [0x4000-0x407f]
[ 0.196778] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.196873] pci 0000:00:0c.0: bridge io port: [0x4000-0x4fff]
[ 0.196881] pci 0000:00:0c.0: bridge 32bit mmio: [0xac000000-0xaeffffff]
[ 0.196895] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.196930] pci 0000:03:00.0: reg 10 32bit mmio: [0xaa000000-0xaaffffff]
[ 0.196939] pci 0000:03:00.0: reg 14 64bit mmio: [0xb0000000-0xbfffffff]
[ 0.196947] pci 0000:03:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff]
[ 0.196952] pci 0000:03:00.0: reg 24 io port: [0x5000-0x507f]
[ 0.196958] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.197010] pci 0000:00:10.0: bridge io port: [0x5000-0x5fff]
[ 0.197013] pci 0000:00:10.0: bridge 32bit mmio: [0xaa000000-0xaaffffff]
[ 0.197017] pci 0000:00:10.0: bridge 64bit mmio pref: [0xb0000000-0xcdffffff]
[ 0.197076] pci 0000:00:15.0: bridge io port: [0x6000-0x6fff]
[ 0.197084] pci 0000:00:15.0: bridge 32bit mmio: [0xf0200000-0xf03fffff]
[ 0.197098] pci 0000:00:15.0: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
[ 0.197173] pci 0000:06:00.0: reg 10 64bit mmio: [0xf0400000-0xf0403fff]
[ 0.197251] pci 0000:06:00.0: supports D1 D2
[ 0.197253] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.197258] pci 0000:06:00.0: PME# disabled
[ 0.197336] pci 0000:00:16.0: bridge 32bit mmio: [0xf0400000-0xf04fffff]
[ 0.197571] pci_bus 0000:00: on NUMA node 0
[ 0.197576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.197754] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.197768] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.260469] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11 14 15)
[ 0.260469] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)
[ 0.260655] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.260883] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.261114] ACPI: PCI Interrupt Link [Z00Q] (IRQs 18 19 20 21 22 23) *11
[ 0.261343] ACPI: PCI Interrupt Link [Z00R] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.261571] ACPI: PCI Interrupt Link [Z00S] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.261800] ACPI: PCI Interrupt Link [Z00T] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.262028] ACPI: PCI Interrupt Link [Z00U] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.262256] ACPI: PCI Interrupt Link [Z00V] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.262484] ACPI: PCI Interrupt Link [Z00W] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.262712] ACPI: PCI Interrupt Link [Z00X] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.262941] ACPI: PCI Interrupt Link [Z00Y] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.264230] ACPI: PCI Interrupt Link [Z00Z] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.264458] ACPI: PCI Interrupt Link [Z010] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.264687] ACPI: PCI Interrupt Link [Z011] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.264914] ACPI: PCI Interrupt Link [Z012] (IRQs 18 19 20 21 22 23) *10
[ 0.265142] ACPI: PCI Interrupt Link [Z013] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.265370] ACPI: PCI Interrupt Link [Z014] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.265598] ACPI: PCI Interrupt Link [Z015] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.265827] ACPI: PCI Interrupt Link [Z016] (IRQs 18 19 20 21 22 23) *11
[ 0.266054] ACPI: PCI Interrupt Link [Z017] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.266283] ACPI: PCI Interrupt Link [Z018] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.266511] ACPI: PCI Interrupt Link [Z019] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.266739] ACPI: PCI Interrupt Link [Z01A] (IRQs 18 19 20 21 22 23) *10
[ 0.266967] ACPI: PCI Interrupt Link [Z01B] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.267195] ACPI: PCI Interrupt Link [Z01C] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.267423] ACPI: PCI Interrupt Link [Z01D] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.267652] ACPI: PCI Interrupt Link [Z01E] (IRQs 18 19 20 21 22 23) *11
[ 0.267880] ACPI: PCI Interrupt Link [Z01F] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.268119] ACPI: PCI Interrupt Link [Z01G] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.268348] ACPI: PCI Interrupt Link [Z01H] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.268576] ACPI: PCI Interrupt Link [LSMB] (IRQs 18 19 20 21 22 23) *10
[ 0.268802] ACPI: PCI Interrupt Link [LUS0] (IRQs 18 19 20 21 22 23) *7
[ 0.269032] ACPI: PCI Interrupt Link [LUS2] (IRQs 18 19 20 21 22 23) *11
[ 0.269260] ACPI: PCI Interrupt Link [LMAC] (IRQs 18 19 20 21 22 23) *10
[ 0.269487] ACPI: PCI Interrupt Link [LAZA] (IRQs 17) *11
[ 0.269712] ACPI: PCI Interrupt Link [LGPU] (IRQs 18 19 20 21 22 23) *5
[ 0.269939] ACPI: PCI Interrupt Link [LPID] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.270167] ACPI: PCI Interrupt Link [LSI0] (IRQs 18 19 20 21 22 23) *11
[ 0.270396] ACPI: PCI Interrupt Link [LSI1] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.270625] ACPI: PCI Interrupt Link [Z00O] (IRQs 18 19 20 21 22 23) *5
[ 0.270855] ACPI: PCI Interrupt Link [Z00P] (IRQs 18 19 20 21 22 23) *10
[ 0.271083] ACPI: PCI Interrupt Link [LPMU] (IRQs 18 19 20 21 22 23) *10
[ 0.271145] SCSI subsystem initialized
[ 0.271145] libata version 3.00 loaded.
[ 0.271145] usbcore: registered new interface driver usbfs
[ 0.271145] usbcore: registered new interface driver hub
[ 0.271145] usbcore: registered new device driver usb
[ 0.272026] ACPI: WMI: Mapper loaded
[ 0.272026] PCI: Using ACPI for IRQ routing
[ 0.292006] Bluetooth: Core ver 2.15
[ 0.292019] NET: Registered protocol family 31
[ 0.292019] Bluetooth: HCI device and connection manager initialized
[ 0.292019] Bluetooth: HCI socket layer initialized
[ 0.292021] NET: Registered protocol family 8
[ 0.292023] NET: Registered protocol family 20
[ 0.292036] NetLabel: Initializing
[ 0.292036] NetLabel: domain hash size = 128
[ 0.292036] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.292036] NetLabel: unlabeled traffic allowed by default
[ 0.292036] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.292036] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.316007] pnp: PnP ACPI init
[ 0.316014] ACPI: bus type pnp registered
[ 0.317130] pnp 00:03: mem resource (0xf0600000-0xf0607fff) overlaps 0000:00:03.5 BAR 0 (0xf0600000-0xf067ffff), disabling
[ 0.321690] pnp: PnP ACPI: found 13 devices
[ 0.321692] ACPI: ACPI bus type pnp unregistered
[ 0.321695] PnPBIOS: Disabled by ACPI PNP
[ 0.321703] system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
[ 0.321706] system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.321709] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.321711] system 00:00: iomem range 0xfed00000-0xfed00fff has been reserved
[ 0.321719] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 0.321721] system 00:04: ioport range 0x1080-0x10ff has been reserved
[ 0.321723] system 00:04: ioport range 0x1400-0x147f has been reserved
[ 0.321726] system 00:04: ioport range 0x1480-0x14ff has been reserved
[ 0.321728] system 00:04: ioport range 0x1800-0x187f has been reserved
[ 0.321730] system 00:04: ioport range 0x1880-0x18ff has been reserved
[ 0.321736] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.321738] system 00:07: ioport range 0x910-0x911 has been reserved
[ 0.321741] system 00:07: ioport range 0x295-0x296 has been reserved
[ 0.356640] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.356642] pci 0000:00:09.0: IO window: disabled
[ 0.356646] pci 0000:00:09.0: MEM window: 0xf0500000-0xf05fffff
[ 0.356649] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.356656] pci 0000:02:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
[ 0.356658] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02
[ 0.356663] pci 0000:00:0c.0: IO window: 0x4000-0x4fff
[ 0.356673] pci 0000:00:0c.0: MEM window: 0xac000000-0xaeffffff
[ 0.356680] pci 0000:00:0c.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.356694] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
[ 0.356696] pci 0000:00:10.0: IO window: 0x5000-0x5fff
[ 0.356699] pci 0000:00:10.0: MEM window: 0xaa000000-0xaaffffff
[ 0.356702] pci 0000:00:10.0: PREFETCH window: 0x000000b0000000-0x000000cdffffff
[ 0.356706] pci 0000:00:15.0: PCI bridge, secondary bus 0000:04
[ 0.356711] pci 0000:00:15.0: IO window: 0x6000-0x6fff
[ 0.356721] pci 0000:00:15.0: MEM window: 0xf0200000-0xf03fffff
[ 0.356728] pci 0000:00:15.0: PREFETCH window: 0x000000f0000000-0x000000f01fffff
[ 0.356741] pci 0000:00:16.0: PCI bridge, secondary bus 0000:06
[ 0.356743] pci 0000:00:16.0: IO window: disabled
[ 0.356752] pci 0000:00:16.0: MEM window: 0xf0400000-0xf04fffff
[ 0.356760] pci 0000:00:16.0: PREFETCH window: disabled
[ 0.356772] pci 0000:00:17.0: PCI bridge, secondary bus 0000:07
[ 0.356774] pci 0000:00:17.0: IO window: disabled
[ 0.356783] pci 0000:00:17.0: MEM window: disabled
[ 0.356790] pci 0000:00:17.0: PREFETCH window: disabled
[ 0.356803] pci 0000:00:18.0: PCI bridge, secondary bus 0000:08
[ 0.356804] pci 0000:00:18.0: IO window: disabled
[ 0.356814] pci 0000:00:18.0: MEM window: disabled
[ 0.356821] pci 0000:00:18.0: PREFETCH window: disabled
[ 0.356838] pci 0000:00:09.0: setting latency timer to 64
[ 0.357173] ACPI: PCI Interrupt Link [Z00Q] enabled at IRQ 23
[ 0.357176] alloc irq_desc for 23 on cpu 0 node 0
[ 0.357178] alloc kstat_irqs on cpu 0 node 0
[ 0.357182] pci 0000:00:0c.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
[ 0.357191] pci 0000:00:0c.0: setting latency timer to 64
[ 0.357198] pci 0000:00:10.0: setting latency timer to 64
[ 0.357524] ACPI: PCI Interrupt Link [Z012] enabled at IRQ 22
[ 0.357527] alloc irq_desc for 22 on cpu 0 node 0
[ 0.357528] alloc kstat_irqs on cpu 0 node 0
[ 0.357532] pci 0000:00:15.0: PCI INT A -> Link[Z012] -> GSI 22 (level, low) -> IRQ 22
[ 0.357540] pci 0000:00:15.0: setting latency timer to 64
[ 0.357869] ACPI: PCI Interrupt Link [Z016] enabled at IRQ 21
[ 0.357872] alloc irq_desc for 21 on cpu 0 node 0
[ 0.357873] alloc kstat_irqs on cpu 0 node 0
[ 0.357877] pci 0000:00:16.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
[ 0.357885] pci 0000:00:16.0: setting latency timer to 64
[ 0.358214] ACPI: PCI Interrupt Link [Z01A] enabled at IRQ 20
[ 0.358216] alloc irq_desc for 20 on cpu 0 node 0
[ 0.358218] alloc kstat_irqs on cpu 0 node 0
[ 0.358221] pci 0000:00:17.0: PCI INT A -> Link[Z01A] -> GSI 20 (level, low) -> IRQ 20
[ 0.358229] pci 0000:00:17.0: setting latency timer to 64
[ 0.358559] ACPI: PCI Interrupt Link [Z01E] enabled at IRQ 19
[ 0.358561] alloc irq_desc for 19 on cpu 0 node 0
[ 0.358563] alloc kstat_irqs on cpu 0 node 0
[ 0.358566] pci 0000:00:18.0: PCI INT A -> Link[Z01E] -> GSI 19 (level, low) -> IRQ 19
[ 0.358574] pci 0000:00:18.0: setting latency timer to 64
[ 0.358580] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.358582] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.358585] pci_bus 0000:01: resource 1 mem: [0xf0500000-0xf05fffff]
[ 0.358587] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.358589] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.358591] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff]
[ 0.358593] pci_bus 0000:02: resource 1 mem: [0xac000000-0xaeffffff]
[ 0.358595] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.358598] pci_bus 0000:03: resource 0 io: [0x5000-0x5fff]
[ 0.358600] pci_bus 0000:03: resource 1 mem: [0xaa000000-0xaaffffff]
[ 0.358602] pci_bus 0000:03: resource 2 pref mem [0xb0000000-0xcdffffff]
[ 0.358604] pci_bus 0000:04: resource 0 io: [0x6000-0x6fff]
[ 0.358606] pci_bus 0000:04: resource 1 mem: [0xf0200000-0xf03fffff]
[ 0.358608] pci_bus 0000:04: resource 2 pref mem [0xf0000000-0xf01fffff]
[ 0.358611] pci_bus 0000:06: resource 1 mem: [0xf0400000-0xf04fffff]
[ 0.358636] NET: Registered protocol family 2
[ 0.404051] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.404290] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.404622] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.404792] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.404794] TCP reno registered
[ 0.416057] NET: Registered protocol family 1
[ 0.416098] Trying to unpack rootfs image as initramfs...
[ 0.500628] Switched to high resolution mode on CPU 1
[ 0.504008] Switched to high resolution mode on CPU 0
[ 0.574794] Freeing initrd memory: 7621k freed
[ 0.578196] Simple Boot Flag at 0x36 set to 0x1
[ 0.578516] cpufreq-nforce2: No nForce2 chipset.
[ 0.578607] Scanning for low memory corruption every 60 seconds
[ 0.578802] audit: initializing netlink socket (disabled)
[ 0.578815] type=2000 audit(1242765067.577:1): initialized
[ 0.585449] highmem bounce pool size: 64 pages
[ 0.585454] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.587682] VFS: Disk quotas dquot_6.5.2
[ 0.587754] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.588549] fuse init (API version 7.11)
[ 0.588691] msgmni has been set to 1713
[ 0.588878] alg: No test for stdrng (krng)
[ 0.588886] io scheduler noop registered
[ 0.588888] io scheduler anticipatory registered
[ 0.588890] io scheduler deadline registered
[ 0.588949] io scheduler cfq registered (default)
[ 0.589227] pci 0000:03:00.0: Boot video device
[ 0.589549] alloc irq_desc for 24 on cpu 0 node 0
[ 0.589552] alloc kstat_irqs on cpu 0 node 0
[ 0.589571] pcieport-driver 0000:00:0c.0: irq 24 for MSI/MSI-X
[ 0.589612] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 0.590013] alloc irq_desc for 25 on cpu 0 node 0
[ 0.590015] alloc kstat_irqs on cpu 0 node 0
[ 0.590032] pcieport-driver 0000:00:15.0: irq 25 for MSI/MSI-X
[ 0.590072] pcieport-driver 0000:00:15.0: setting latency timer to 64
[ 0.590462] alloc irq_desc for 26 on cpu 0 node 0
[ 0.590463] alloc kstat_irqs on cpu 0 node 0
[ 0.590480] pcieport-driver 0000:00:16.0: irq 26 for MSI/MSI-X
[ 0.590520] pcieport-driver 0000:00:16.0: setting latency timer to 64
[ 0.590911] alloc irq_desc for 27 on cpu 0 node 0
[ 0.590912] alloc kstat_irqs on cpu 0 node 0
[ 0.590929] pcieport-driver 0000:00:17.0: irq 27 for MSI/MSI-X
[ 0.590969] pcieport-driver 0000:00:17.0: setting latency timer to 64
[ 0.591359] alloc irq_desc for 28 on cpu 0 node 0
[ 0.591360] alloc kstat_irqs on cpu 0 node 0
[ 0.591377] pcieport-driver 0000:00:18.0: irq 28 for MSI/MSI-X
[ 0.591417] pcieport-driver 0000:00:18.0: setting latency timer to 64
[ 0.591639] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.591722] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.592983] ACPI: AC Adapter [ADP0] (on-line)
[ 0.593334] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.593337] ACPI: Power Button [PWRF]
[ 0.593400] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.593402] ACPI: Power Button [PWRB]
[ 0.593700] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2a/PNP0C0E:00/input/input2
[ 0.593702] ACPI: Sleep Button [SLPB]
[ 0.593768] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 0.595193] ACPI: Lid Switch [LID]
[ 0.596198] ACPI: SSDT 6fee1086 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.596990] ACPI: SSDT 6fee1648 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.598765] Monitor-Mwait will be used to enter C-1 state
[ 0.598791] Monitor-Mwait will be used to enter C-2 state
[ 0.598810] Monitor-Mwait will be used to enter C-3 state
[ 0.598817] Marking TSC unstable due to TSC halts in idle
[ 0.598856] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.598896] processor ACPI_CPU:00: registered as cooling_device0
[ 0.598899] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.599257] ACPI: SSDT 6fee0ed6 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.599640] ACPI: SSDT 6fee15c3 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.600456] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.600495] processor ACPI_CPU:01: registered as cooling_device1
[ 0.600499] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.608280] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.608287] ACPI: Thermal Zone [THRM] (59 C)
[ 0.608677] isapnp: Scanning for PnP cards...
[ 0.961613] isapnp: No Plug & Play device found
[ 0.965894] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.967878] brd: module loaded
[ 0.968610] loop: module loaded
[ 0.968783] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.968834] Driver 'sd' needs updating - please use bus_type methods
[ 0.968871] Driver 'sr' needs updating - please use bus_type methods
[ 0.968959] ahci 0000:00:0b.0: version 3.0
[ 0.969304] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18
[ 0.969307] alloc irq_desc for 18 on cpu 0 node 0
[ 0.969309] alloc kstat_irqs on cpu 0 node 0
[ 0.969314] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 18 (level, low) -> IRQ 18
[ 0.969344] alloc irq_desc for 29 on cpu 0 node 0
[ 0.969346] alloc kstat_irqs on cpu 0 node 0
[ 0.969352] ahci 0000:00:0b.0: irq 29 for MSI/MSI-X
[ 0.969414] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.969417] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part
[ 0.969420] ahci 0000:00:0b.0: setting latency timer to 64
[ 0.969762] scsi0 : ahci
[ 0.969898] scsi1 : ahci
[ 0.970002] scsi2 : ahci
[ 0.970109] scsi3 : ahci
[ 0.970210] scsi4 : ahci
[ 0.970312] scsi5 : ahci
[ 0.970471] ata1: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884100 irq 29
[ 0.970473] ata2: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884180 irq 29
[ 0.970476] ata3: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884200 irq 29
[ 0.970478] ata4: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884280 irq 29
[ 0.970480] ata5: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884300 irq 29
[ 0.970482] ata6: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884380 irq 29
[ 0.973293] Fixed MDIO Bus: probed
[ 0.973298] PPP generic driver version 2.4.2
[ 0.973481] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.974016] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
[ 0.974019] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, low) -> IRQ 23
[ 0.974030] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.974032] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.974138] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.974161] ehci_hcd 0000:00:04.1: debug port 1
[ 0.974165] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 0.974178] ehci_hcd 0000:00:04.1: irq 23, io mem 0xf0889000
[ 0.988010] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.988100] usb usb1: configuration #1 chosen from 1 choice
[ 0.988153] hub 1-0:1.0: USB hub found
[ 0.988160] hub 1-0:1.0: 4 ports detected
[ 0.988641] ACPI: PCI Interrupt Link [Z00P] enabled at IRQ 22
[ 0.988645] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 22 (level, low) -> IRQ 22
[ 0.988652] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 0.988654] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 0.988745] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 0.988764] ehci_hcd 0000:00:06.1: debug port 1
[ 0.988768] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported
[ 0.988780] ehci_hcd 0000:00:06.1: irq 22, io mem 0xf0889400
[ 1.000016] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 1.000095] usb usb2: configuration #1 chosen from 1 choice
[ 1.000144] hub 2-0:1.0: USB hub found
[ 1.000150] hub 2-0:1.0: 3 ports detected
[ 1.000303] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.000645] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
[ 1.000648] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, low) -> IRQ 21
[ 1.000655] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 1.000658] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 1.000749] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 1.000767] ohci_hcd 0000:00:04.0: irq 21, io mem 0xf0886000
[ 1.054079] usb usb3: configuration #1 chosen from 1 choice
[ 1.054128] hub 3-0:1.0: USB hub found
[ 1.054136] hub 3-0:1.0: 4 ports detected
[ 1.054581] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 20
[ 1.054585] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 20 (level, low) -> IRQ 20
[ 1.054592] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 1.054595] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.054685] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 1.054702] ohci_hcd 0000:00:06.0: irq 20, io mem 0xf0887000
[ 1.093840] ACPI: Battery Slot [BAT0] (battery present)
[ 1.110073] usb usb4: configuration #1 chosen from 1 choice
[ 1.110122] hub 4-0:1.0: USB hub found
[ 1.110129] hub 4-0:1.0: 3 ports detected
[ 1.110272] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.110406] usbcore: registered new interface driver usbserial
[ 1.110446] USB Serial support registered for generic
[ 1.110487] usbcore: registered new interface driver usbserial_generic
[ 1.110489] usbserial: USB Serial Driver core
[ 1.110585] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.116090] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.116095] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.116233] mice: PS/2 mouse device common for all mice
[ 1.116496] rtc_cmos 00:0a: RTC can wake from S4
[ 1.116548] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
[ 1.116595] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.116752] device-mapper: uevent: version 1.0.3
[ 1.116874] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 1.116944] device-mapper: multipath: version 1.0.5 loaded
[ 1.116946] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.117073] EISA: Probing bus 0 at eisa.0
[ 1.117078] Cannot allocate resource for EISA slot 1
[ 1.117080] Cannot allocate resource for EISA slot 2
[ 1.117082] Cannot allocate resource for EISA slot 3
[ 1.117084] Cannot allocate resource for EISA slot 4
[ 1.117085] Cannot allocate resource for EISA slot 5
[ 1.117087] Cannot allocate resource for EISA slot 6
[ 1.117093] EISA: Detected 0 cards.
[ 1.117459] cpuidle: using governor ladder
[ 1.117975] cpuidle: using governor menu
[ 1.118535] TCP cubic registered
[ 1.118848] NET: Registered protocol family 10
[ 1.119214] lo: Disabled Privacy Extensions
[ 1.119268] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.119482] NET: Registered protocol family 17
[ 1.119531] Bluetooth: L2CAP ver 2.13
[ 1.119533] Bluetooth: L2CAP socket layer initialized
[ 1.119535] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.119536] Bluetooth: SCO socket layer initialized
[ 1.119567] Bluetooth: RFCOMM socket layer initialized
[ 1.119571] Bluetooth: RFCOMM TTY layer initialized
[ 1.119572] Bluetooth: RFCOMM ver 1.11
[ 1.120060] Using IPI No-Shortcut mode
[ 1.120211] PM: Resume from disk failed.
[ 1.120222] registered taskstats version 1
[ 1.120333] Magic number: 9:22:549
[ 1.120368] pci_link PNP0C0F:00: hash matches
[ 1.120379] processor ACPI_CPU:04: hash matches
[ 1.120443] rtc_cmos 00:0a: setting system clock to 2009-05-19 20:31:09 UTC (1242765069)
[ 1.120446] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.120447] EDD information not available.
[ 1.288119] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.288151] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.288167] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.288191] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.428052] usb 2-3: new high speed USB device using ehci_hcd and address 2
[ 1.452059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.452072] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.456544] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS20N, A106, max UDMA/133
[ 1.461354] ata2.00: configured for UDMA/133
[ 1.495270] ata1.00: ATA-8: TOSHIBA MK3252GSX, LV011D, max UDMA/100
[ 1.495274] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.496182] ata1.00: configured for UDMA/100
[ 1.496272] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5
[ 1.496667] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 1.496681] sd 0:0:0:0: [sda] Write Protect is off
[ 1.496683] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.496702] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.496785] sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.499842] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS20N A106 PQ: 0 ANSI: 5
[ 1.504039] Clocksource tsc unstable (delta = -157210374 ns)
[ 1.510969] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[ 1.510973] Uniform CD-ROM driver Revision: 3.20
[ 1.511278] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.511410] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.545953] sda1 sda2 sda3 sda4 <<6>usb 2-3: configuration #1 chosen from 1 choice
[ 1.573354] sda5 >
[ 1.574127] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.574153] Freeing unused kernel memory: 516k freed
[ 1.574420] Write protecting the kernel text: 4352k
[ 1.574455] Write protecting the kernel read-only data: 1720k
[ 1.830288] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.830673] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 19
[ 1.830678] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 19 (level, low) -> IRQ 19
[ 1.830684] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.949177] usb 3-4: new full speed USB device using ohci_hcd and address 2
[ 1.951784] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[ 1.951794] ohci1394 0000:01:07.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
[ 1.985956] b43-pci-bridge 0000:06:00.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
[ 1.985966] b43-pci-bridge 0000:06:00.0: setting latency timer to 64
[ 2.006034] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[f0500000-f05007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 2.033085] ssb: ERROR: PLL init unknown for device 4322
[ 2.033089] ssb: ERROR: PMU resource config unknown for device 4322
[ 2.061103] ssb: Sonics Silicon Backplane found on PCI device 0000:06:00.0
[ 2.169091] usb 3-4: configuration #1 chosen from 1 choice
[ 2.172047] hub 3-4:1.0: USB hub found
[ 2.175019] hub 3-4:1.0: 3 ports detected
[ 2.353885] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 0, addr 00:21:70:8f:69:67
[ 2.353889] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
[ 2.419378] PM: Starting manual resume from disk
[ 2.419381] PM: Resume from partition 8:5
[ 2.419382] PM: Checking hibernation image.
[ 2.419510] PM: Resume from disk failed.
[ 2.475523] kjournald starting. Commit interval 5 seconds
[ 2.475534] EXT3-fs: mounted filesystem with writeback data mode.
[ 2.494034] usb 3-4.1: new full speed USB device using ohci_hcd and address 3
[ 2.605121] usb 3-4.1: configuration #1 chosen from 1 choice
[ 2.686042] usb 3-4.2: new full speed USB device using ohci_hcd and address 4
[ 2.798109] usb 3-4.2: configuration #1 chosen from 1 choice
[ 3.280460] ieee1394: Host added: ID:BUS[0-00:1023] GUID[6d4fc0004b76deff]
[ 8.361389] udev: starting version 142
[ 8.526272] usbcore: registered new interface driver hiddev
[ 8.531262] input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input6
[ 8.531328] generic-usb 0003:413C:8157.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0
[ 8.537332] input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input7
[ 8.537408] generic-usb 0003:413C:8158.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0
[ 8.537429] usbcore: registered new interface driver usbhid
[ 8.537432] usbhid: v2.6:USB HID core driver
[ 8.596511] Linux agpgart interface v0.103
[ 8.637255] Linux video capture interface: v2.00
[ 8.658613] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.669151] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 8.682152] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
[ 8.682167] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2000
[ 8.818019] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 8.819372] sdhci: Secure Digital Host Controller Interface driver
[ 8.819374] sdhci: Copyright(c) Pierre Ossman
[ 8.820673] sdhci-pci 0000:01:07.1: SDHCI controller found [1180:0822] (rev 22)
[ 8.821047] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
[ 8.821052] sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
[ 8.821071] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 8.821101] Registered led device: mmc0::
[ 8.821137] mmc0: SDHCI controller on PCI [0000:01:07.1] using DMA
[ 8.821797] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 8.821799] ricoh-mmc: Copyright(c) Philip Langdale
[ 8.821815] ricoh-mmc: Ricoh MMC controller found at 0000:01:07.2 [1180:0843] (rev 12)
[ 8.821829] ricoh-mmc: Controller is now disabled.
[ 8.825688] uvcvideo: Found UVC 1.00 device Integrated Webcam (05ca:18a3)
[ 8.827260] input: Integrated Webcam as /devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.0/input/input9
[ 8.827303] usbcore: registered new interface driver uvcvideo
[ 8.827306] USB Video Class driver (v0.1.0)
[ 9.046045] usb 3-4.3: new full speed USB device using ohci_hcd and address 5
[ 9.123951] nvidia: module license 'NVIDIA' taints kernel.
[ 9.123955] Disabling lock debugging due to kernel taint
[ 9.207182] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/device:12/input/input10
[ 9.207221] ACPI: Video Device [Z01I] (multi-head: no rom: yes post: no)
[ 9.388796] nvidia 0000:02:00.0: enabling device (0004 -> 0007)
[ 9.388811] nvidia 0000:02:00.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
[ 9.388823] nvidia 0000:02:00.0: setting latency timer to 64
[ 9.389544] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 18
[ 9.389547] nvidia 0000:03:00.0: PCI INT A -> Link[LGPU] -> GSI 18 (level, low) -> IRQ 18
[ 9.389552] nvidia 0000:03:00.0: setting latency timer to 64
[ 9.389666] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 9.418142] usb 3-4.3: configuration #1 chosen from 1 choice
[ 9.441121] cfg80211: Calling CRDA to update world regulatory domain
[ 9.458734] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 9.458811] usbcore: registered new interface driver btusb
[ 9.628808] cfg80211: World regulatory domain updated:
[ 9.628811] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.628813] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.628816] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.628818] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.628820] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.628822] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.667752] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 9.668107] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
[ 9.668111] alloc irq_desc for 17 on cpu 0 node 0
[ 9.668113] alloc kstat_irqs on cpu 0 node 0
[ 9.668118] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
[ 9.668122] hda_intel: probe_mask set to 0x9 for device 1028:0271
[ 9.668150] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 9.785554] b43-phy0: Broadcom 4322 WLAN found (core revision 16)
[ 9.828120] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 8, Type 4, Revision 4)
[ 9.828148] b43: probe of ssb0:0 failed with error -95
[ 9.828186] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[ 9.943856] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
[ 9.991400] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 10.332107] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input12
[ 10.812124] input: HDA NVidia Mic at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/input/input13
[ 10.812209] input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/input/input14
[ 10.812255] input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/input/input15
[ 11.097536] lp: driver loaded but no devices found
[ 11.167418] Adding 1759076k swap on /dev/sda5. Priority:-1 extents:1 across:1759076k
[ 11.697224] EXT3 FS on sda3, internal journal
[ 15.113042] CE: hpet increasing min_delta_ns to 15000 nsec
[ 15.517366] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.517369] Bluetooth: BNEP filters: protocol multicast
[ 15.534986] Bridge firewalling registered
[ 17.163342] ppdev: user-space parallel port driver
[ 19.057870] IRQ 18/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
[ 20.625966] eth0: no link during initialization.
[ 20.626420] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.732733] IRQ 23/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
[ 20.739709] NVRM: RmInitAdapter failed! (0x31:0xffffffff:1018)
[ 20.739716] NVRM: rm_init_adapter(0) failed
[ 22.450065] eth0: link up.
[ 22.450857] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 32.832040] eth0: no IPv6 routers present
[ 35.112810] Too big adjustment 32
[ 35.161636] Too big adjustment 32
[ 35.186721] Too big adjustment 32
[ 35.201658] Too big adjustment 32
[ 35.226097] Too big adjustment 32
[ 35.273620] Too big adjustment 32
[ 35.305855] Too big adjustment 32
[ 43.455139] gvfs-gdu-volume[4462]: segfault at c ip 001e6fda sp bfdd7860 error 4 in libgdu.so.0.0.0[1de000+22000]
[ 45.199507] gvfs-gdu-volume[4479]: segfault at c ip 005b5fda sp bfce82b0 error 4 in libgdu.so.0.0.0[5ad000+22000]
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 260 bytes --]
next prev parent reply other threads:[~2009-05-19 20:36 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-18 20:12 [PATCH] Explicitly disable BT radio using rfkill interface on suspend Mario Limonciello
2009-05-18 21:02 ` Matthew Garrett
2009-05-18 21:36 ` Mario Limonciello
2009-05-19 5:03 ` Matthew Garrett
2009-05-19 5:14 ` Marcel Holtmann
2009-05-19 6:27 ` Oliver Neukum
2009-05-19 6:27 ` Oliver Neukum
2009-05-19 6:45 ` Marcel Holtmann
2009-05-19 7:36 ` Oliver Neukum
2009-05-19 9:06 ` Matthew Garrett
2009-05-19 12:47 ` Oliver Neukum
2009-05-19 12:58 ` Matthew Garrett
2009-05-19 16:30 ` Mario Limonciello
2009-05-19 16:33 ` Matthew Garrett
2009-05-19 16:52 ` Mario Limonciello
2009-05-19 19:58 ` Oliver Neukum
2009-05-19 20:36 ` Mario Limonciello [this message]
2009-05-19 21:26 ` Oliver Neukum
2009-05-19 21:26 ` Oliver Neukum
2009-05-19 21:47 ` Mario Limonciello
[not found] ` <4A1328D6.5090404-8PEkshWhKlo@public.gmane.org>
2009-05-19 22:16 ` Oliver Neukum
2009-05-19 22:16 ` Oliver Neukum
[not found] ` <200905200016.49110.oliver-GvhC2dPhHPQdnm+yROfE0A@public.gmane.org>
2009-05-19 22:19 ` Mario Limonciello
2009-05-19 22:19 ` Mario Limonciello
2009-05-20 2:17 ` Alan Stern
2009-05-20 2:17 ` Alan Stern
2009-05-20 12:29 ` Oliver Neukum
2009-05-20 12:29 ` Oliver Neukum
[not found] ` <200905201429.06113.oliver-GvhC2dPhHPQdnm+yROfE0A@public.gmane.org>
2009-05-20 14:17 ` Alan Stern
2009-05-20 14:17 ` Alan Stern
2009-05-20 17:52 ` Mario Limonciello
[not found] ` <4A144347.80303-8PEkshWhKlo@public.gmane.org>
2009-05-20 18:31 ` Alan Stern
2009-05-20 18:31 ` Alan Stern
-- strict thread matches above, loose matches on Subject: below --
2009-06-30 22:02 [PATCH] Explicitly disable BT radio using rfkill interface on Mario Limonciello
2009-07-01 3:53 ` [PATCH] Explicitly disable BT radio using rfkill interface on suspend Mario_Limonciello
2009-07-01 13:13 ` Mario_Limonciello
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A131858.3080805@dell.com \
--to=mario_limonciello@dell.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mjg59@srcf.ucam.org \
--cc=oliver@neukum.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.