From: Jeff Garzik <jeff@garzik.org>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-ide@vger.kernel.org
Subject: Re: [PATCH 1/2] libata: Use IGN_SIMPLEX for ALi
Date: Wed, 20 May 2009 16:11:56 -0400 [thread overview]
Message-ID: <4A14640C.1010603@garzik.org> (raw)
In-Reply-To: <20090513140201.11247.76226.stgit@t61.ukuu.org.uk>
Alan Cox wrote:
> From: Alan Cox <alan@linux.intel.com>
>
> Some ALi devices report simplex if they have been disabled and re-enabled, and
> restoring the byte does not work. Ignore it - the needed supporting logic is
> already present for the SATA ULi ports.
>
> Signed-off-by: Alan Cox <alan@linux.intel.com>
> ---
>
> drivers/ata/pata_ali.c | 17 +++++++++++------
> 1 files changed, 11 insertions(+), 6 deletions(-)
>
>
> diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
> index 751b7ea..fc9c5d6 100644
> --- a/drivers/ata/pata_ali.c
> +++ b/drivers/ata/pata_ali.c
> @@ -497,14 +497,16 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
> };
> /* Revision 0x20 added DMA */
> static const struct ata_port_info info_20 = {
> - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
> + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
> + ATA_FLAG_IGN_SIMPLEX,
> .pio_mask = ATA_PIO4,
> .mwdma_mask = ATA_MWDMA2,
> .port_ops = &ali_20_port_ops
> };
> /* Revision 0x20 with support logic added UDMA */
> static const struct ata_port_info info_20_udma = {
> - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
> + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
> + ATA_FLAG_IGN_SIMPLEX,
> .pio_mask = ATA_PIO4,
> .mwdma_mask = ATA_MWDMA2,
> .udma_mask = ATA_UDMA2,
> @@ -512,7 +514,8 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
> };
> /* Revision 0xC2 adds UDMA66 */
> static const struct ata_port_info info_c2 = {
> - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
> + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
> + ATA_FLAG_IGN_SIMPLEX,
> .pio_mask = ATA_PIO4,
> .mwdma_mask = ATA_MWDMA2,
> .udma_mask = ATA_UDMA4,
> @@ -520,7 +523,8 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
> };
> /* Revision 0xC3 is UDMA66 for now */
> static const struct ata_port_info info_c3 = {
> - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
> + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
> + ATA_FLAG_IGN_SIMPLEX,
> .pio_mask = ATA_PIO4,
> .mwdma_mask = ATA_MWDMA2,
> .udma_mask = ATA_UDMA4,
> @@ -528,7 +532,8 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
> };
> /* Revision 0xC4 is UDMA100 */
> static const struct ata_port_info info_c4 = {
> - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
> + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
> + ATA_FLAG_IGN_SIMPLEX,
> .pio_mask = ATA_PIO4,
> .mwdma_mask = ATA_MWDMA2,
> .udma_mask = ATA_UDMA5,
> @@ -536,7 +541,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
> };
> /* Revision 0xC5 is UDMA133 with LBA48 DMA */
> static const struct ata_port_info info_c5 = {
> - .flags = ATA_FLAG_SLAVE_POSS,
> + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_IGN_SIMPLEX,
> .pio_mask = ATA_PIO4,
> .mwdma_mask = ATA_MWDMA2,
> .udma_mask = ATA_UDMA6,
applied
next prev parent reply other threads:[~2009-05-20 20:11 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-13 14:01 [PATCH 0/2] Series short description Alan Cox
2009-05-13 14:02 ` [PATCH 1/2] libata: Use IGN_SIMPLEX for ALi Alan Cox
2009-05-13 15:56 ` Sergei Shtylyov
2009-05-13 16:11 ` Alan Cox
2009-05-20 20:11 ` Jeff Garzik [this message]
2009-05-13 14:02 ` [PATCH 2/2] ata_piix: Enable parallel scan Alan Cox
2009-06-10 15:06 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A14640C.1010603@garzik.org \
--to=jeff@garzik.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.