From: "Éric Piel" <eric.piel@tremplin-utc.net>
To: Isaac702 <isaac702@gmail.com>, Andrew Morton <akpm@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>, LKML <linux-kernel@vger.kernel.org>,
Christian Weidle <slateroni@gmail.com>,
Pavel Herrmann <morpheus.ibis@gmail.com>
Subject: Re: [PATCH 4/4] lis3: Add three new laptop models
Date: Thu, 21 May 2009 13:38:13 +0200 [thread overview]
Message-ID: <4A153D25.8050907@tremplin-utc.net> (raw)
In-Reply-To: <36a8c4f10905210424i65f5efadjdd6f13dea77cb2e6@mail.gmail.com>
Op 21-05-09 13:24, Isaac702 schreef:
> I apologize however when I reported that I was still using the 6710
> settings. When the normal axis settings were used the results showed the
> 6715 should be using "y_inverted" to behave normally.
> I'm sorry for reporting this incorrectly in the beginning.
>
Thank you for noticing this so quickly. Here is an updated patch.
Eric
==
Separate the 6710 and 6715, and set the right axis information for the
6715.
Reported-by: Isaac702 <isaac702@gmail.com>
Add the 6930.
Reported-by: Christian Weidle <slateroni@gmail.com>
Add the 2710.
Reported-by: Pavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
---
drivers/hwmon/hp_accel.c | 7 +++++--
1 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index 92db68e..6679854 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -158,6 +158,7 @@ static struct axis_conversion lis3lv02d_axis_normal = {1, 2, 3};
static struct axis_conversion lis3lv02d_axis_y_inverted = {1, -2, 3};
static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3};
static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3};
+static struct axis_conversion lis3lv02d_axis_xy_swap = {2, 1, 3};
static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3};
static struct axis_conversion lis3lv02d_axis_xy_rotated_left_usd = {-2, 1, -3};
static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3};
@@ -191,13 +192,16 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
AXIS_DMI_MATCH("NX9420", "HP Compaq nx9420", x_inverted),
AXIS_DMI_MATCH("NW9440", "HP Compaq nw9440", x_inverted),
AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted),
+ AXIS_DMI_MATCH("NC2710", "HP Compaq 2710", xy_swap),
AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted),
AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left),
AXIS_DMI_MATCH("HP2140", "HP 2140", xy_swap_inverted),
AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd),
AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd),
AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right),
- AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted),
+ AXIS_DMI_MATCH("NC6710x", "HP Compaq 6710", xy_swap_yz_inverted),
+ AXIS_DMI_MATCH("NC6715x", "HP Compaq 6715", y_inverted),
+ AXIS_DMI_MATCH("NC693xx", "HP EliteBook 693", xy_rotated_right),
/* Intel-based HP Pavilion dv5 */
AXIS_DMI_MATCH2("HPDV5_I",
PRODUCT_NAME, "HP Pavilion dv5",
@@ -213,7 +217,6 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
{ NULL, }
/* Laptop models without axis info (yet):
* "NC6910" "HP Compaq 6910"
- * HP Compaq 8710x Notebook PC / Mobile Workstation
* "NC2400" "HP Compaq nc2400"
* "NX74x0" "HP Compaq nx74"
* "NX6325" "HP Compaq nx6325"
--
1.6.2.4
prev parent reply other threads:[~2009-05-21 11:38 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-21 9:27 [PATCH 0/4] lis3: clean up and updates Éric Piel
2009-05-21 9:29 ` [PATCH 1/4] lis3: fix misc device unregistering and printk Éric Piel
2009-05-21 10:48 ` Pavel Machek
2009-05-21 9:30 ` [PATCH 2/4] lis3: remove automatic shutdown of the device Éric Piel
2009-05-21 11:36 ` Pavel Machek
2009-05-21 11:55 ` Éric Piel
2009-05-21 12:08 ` Pavel Machek
2009-05-21 9:31 ` [PATCH 3/4] lis3: use input_polled_device Éric Piel
2009-05-21 9:33 ` [PATCH 4/4] lis3: Add three new laptop models Éric Piel
2009-05-21 10:49 ` Pavel Machek
2009-05-21 11:07 ` Éric Piel
2009-05-21 11:36 ` Isaac702
[not found] ` <36a8c4f10905210424i65f5efadjdd6f13dea77cb2e6@mail.gmail.com>
2009-05-21 11:38 ` Éric Piel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A153D25.8050907@tremplin-utc.net \
--to=eric.piel@tremplin-utc.net \
--cc=akpm@linux-foundation.org \
--cc=isaac702@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=morpheus.ibis@gmail.com \
--cc=pavel@ucw.cz \
--cc=slateroni@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.