From: Leonardo Carneiro <lscarneiro@veltrac.com.br>
To: netfilter@vger.kernel.org
Subject: Re: access problem
Date: Tue, 26 May 2009 10:20:17 -0300 [thread overview]
Message-ID: <4A1BEC91.1080305@veltrac.com.br> (raw)
In-Reply-To: <49C0DA48.8030701@standarduniversal.com.au>
Hi again everyone. Sorry for revivin a old topic, but i solved the
problem. just did a SNAT. tks for the help anyway.
-A POSTROUTING -p tcp -m tcp -d 192.168.1.2 --dport 5222 -j SNAT
--to-source 192.168.1.1
Brian Austin - Standard Universal escreveu:
> spend $10.
>
> register a domain.
>
> use split DNS as described below.
>
> :-)
>
> b
>
>
> Leonardo Carneiro wrote:
>> Hi Paulo,
>>
>> tks for the tip, i already have a internal DNS, but i don't have a
>> external one =/
>>
>> anyother ideas?
>>
>>
>> paulobruck1 escreveu:
>>> Em Seg, 2009-03-16 às 16:41 -0300, Leonardo Carneiro escreveu:
>>>
>>>> Hi everyone.
>>>>
>>>
>>> Hi Leonardo
>>>
>>>
>>>> I'm new in the list and hope have a nice time here.
>>>> First of all, sorry about my poor enlgish, i'm from Brasil.
>>>>
>>>>
>>> welcome...80)
>>>
>>>
>>>
>>>> I've got a standard scenario with a private network
>>>> (192.168.1.0/24) beeing natted by a internet server (192.168.1.1)
>>>> running iptables 1.3.0.
>>>>
>>>> In the private network I have a application server (192.168.1.2)
>>>> running a service on port 5222. The port is properly forwarded in
>>>> internet server, and users across the internet can access the
>>>> service through the public IP of the internet server.
>>>>
>>>> Users on the private network can access the service through the
>>>> private IP of the server, but cannot access using the public ip.
>>>> Accessing using the public ip would be very usefull, since lots of
>>>> users have notebooks and they access the service inside and outside
>>>> the private network
>>>>
>>>> those are interface infos and the rules forwarding the port to the
>>>> application server:
>>>> eth0: public IP
>>>> eth1: private network, 192.168.1.1
>>>>
>>>>
>>> If you like your intenal users use this ip, install a Internal DNS for
>>> them and use at your externat ip use a dns too. Example:
>>>
>>> Internal DNS
>>> aplicationsserver IN A 192.168.1.1
>>>
>>> EXternal DNS
>>> applicationserver IN A XXX.XXX.XXX.XXX
>>> ( your public IP that is redirect to 192.168.1.1)
>>>
>>>
>>> Thats all...
>>>
>>>
>>> best regards
>>>
>>>
>>>> iptables -A PREROUTING -p tcp -m tcp -d [private_ip] -i eth0
>>>> --dport 5222 -j DNAT --to-destination 192.168.1.2
>>>> iptables -A FORWARD -p tcp -m tcp -d 192.168.1.2 -i eth0 -o eth1
>>>> --dport 5222 -j ACCEPT
>>>>
>>>> I've done some tests, adding some rules like
>>>>
>>>> iptables -A PREROUTING -p tcp -m tcp -d [private_ip] -i eth1
>>>> --dport 5222 -j DNAT --to-destination 192.168.1.2
>>>> iptables -A FORWARD -p tcp -m tcp -d 192.168.1.2 -i eth0 -o eth1
>>>> --dport 5222 -j ACCEPT
>>>>
>>>> or just
>>>>
>>>> iptables -A PREROUTING -p tcp -m tcp -d [private_ip] -i eth1
>>>> --dport 5222 -j DNAT --to-destination 192.168.1.2
>>>>
>>>> but i just cannot connect using the public ip =S
>>>>
>>>> sometimes the server answer the request, but using the private ip,
>>>> no the public ip requested by the host, and sometimes the server
>>>> just not answer the request.
>>>>
>>>> any ideas how can i solve this?
>>>>
>>>> tks in advance.
>>>>
>>>>
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe
>>>> netfilter" in
>>>> the body of a message to majordomo@vger.kernel.org
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>
>>>
>>>
>>>
>>
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe netfilter" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe netfilter" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
*Leonardo de Souza Carneiro*
*Veltrac - Tecnologia em Logística.*
lscarneiro@veltrac.com.br <mailto:lscarneiro@veltrac.com.br>
http://www.veltrac.com.br <http://www.veltrac.com.br/>
/Fone Com.: (43)2105-5601/
/Av. Higienópolis 1601 Ed. Eurocenter Sl. 803/
/Londrina- PR/
/Cep: 86015-010/
next prev parent reply other threads:[~2009-05-26 13:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-17 17:23 access problem Leonardo Carneiro
2009-03-18 11:26 ` Brian Austin - Standard Universal
2009-05-26 13:20 ` Leonardo Carneiro [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-03-16 19:41 Leonardo Carneiro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A1BEC91.1080305@veltrac.com.br \
--to=lscarneiro@veltrac.com.br \
--cc=netfilter@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.