[U-Boot] Axiom MCF5282 help

[Mark Giacobbe <mcgiacobbe@gmail.com>]

Thanks, the crystal (Y2) is  FS25.00.

What should it be?  I'm thinking it may be a hardware issue also, 
because uClinux is doing the same thing.
Mark

TC Liew wrote:
> Mark,
>
> There could be a hardware issue. Is the phy crystal on the board is
> F25.00 or F25.00P?
>
> Regards,
> TsiChung
>
> On Mon, May 25, 2009 at 3:15 PM, Mark Giacobbe
> <mgiacobbe@adaptivedesignconcepts.com> wrote:
>   
>> Hi All -
>>
>>    I'm new to u-boot and I am running into some issues.  I an using the
>> Axiom 5282lite board and I cannot get the ethernet working.
>>
>>    I have u-boot flashed onto the board, and when I connect the board
>> to my Linksys WRT54G router, the Link LED on the board constantly
>> flashes, as does the LED for that port on the router.
>>
>>    I assigned an IP to the board, outside the DHCP range, but I cannot
>> ping the board, and the board cannot ping anything, including the router.
>>
>>    Any ideas?
>>
>>    Speaking of DHCP, does the code support DHCP for the 5282?
>>
>> Any help you be appreciated.
>> Thanks
>> Mark
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>>
>>     
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
>