Re: [2.6.29.4] Blade 2000

["BERTRAND Joël" <joel.bertrand@systella.fr>]

BERTRAND Joël a écrit :
>     Hello,
> 
>     I have made some minor modifications in bbc_i2c driver to add en 
> entry in /proc directory. ALl mofications have been made against 
> 2.6.29.4 but I haven't verified that this kernel was bootable.
> 
>     I have built my own bbc_i2c driver as a module. 2.6.29.4 kernel 
> hangs just after qla2xxx initialization. I don't think that this driver 
> try to upload firmware. This firmware is built into the kernel.
> 
> CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> # CONFIG_STANDALONE is not set
> # CONFIG_PREVENT_FIRMWARE_BUILD is not set
> CONFIG_FW_LOADER=y
> CONFIG_FIRMWARE_IN_KERNEL=y
> CONFIG_EXTRA_FIRMWARE="ql2200_fw.bin"
> CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
> 
> Root rayleigh:[/lib/firmware] > ls
> edgeport  emi62  keyspan_pda  ql2100_fw.bin  ql2300_fw.bin  ql2400_fw.bin
> emi26     ess    korg         ql2200_fw.bin  ql2322_fw.bin  yamaha
> Root rayleigh:[/lib/firmware] >
> 
> Configuration:
> 
> Blade 2000, 2 GB, 2*UIII+/900, Creator3D, internal NIC + 2*3Com NIC.
> 
>     Is it a known trouble ?

	Nobody ? I have tried 2.6.29.1 with exactly the same bug. 2.6.28.7 
worked fine.

	Regards,

	JKB