Re: [linux-lvm] highmem64G Breaks My LVM

[Eddie Atherton <stunnel@attglobal.net>]

Eddie Atherton wrote:
> I originally posted this on the LinuxQuestions forum:  
> http://www.linuxquestions.org/questions/slackware-14/highmem64g-kills-lvm-728418/ 
>
>
> I have a fairly vanilla Slack 12.2 system.  I recently upped my memory 
> to 8GB, and so recompiled the kernel, making a single change.  
> HIGNMEM4G was changed to HIGHMEM64G.  On re-booting, I could see the 
> extra memory, but, unfortunately, I lost all my LVM volumes.
>
> After a few checks, I found that vgscan was failing:
>
> root@The-Tardis:~# vgscan --mknodes --verbose
>    Wiping cache of LVM-capable devices
>    Wiping internal VG cache
>  Reading all physical volumes.  This may take a while...
>    Finding all volume groups
>  /dev/sda1: Checksum error
>    Finding all logical volumes
>
> If I reboot back to the HIGHMEM4G kernel, then all works fine again:
>
> root@The-Tardis:~# vgscan --mknodes --verbose
>    Wiping cache of LVM-capable devices
>    Wiping internal VG cache
>  Reading all physical volumes.  This may take a while...
>    Finding all volume groups
>    Finding volume group "raid_vg"
>  Found volume group "raid_vg" using metadata type lvm2
>    Finding all logical volumes
>
> All the LVM volumes reside on an LSI megaRAID card, detected as 
> /dev/sda, which is dedicated to a single PVM.
>
> Any ideas why changing the HIGHMEM kernel option would break LVM.
>
> Cheers,
> Eddie

Upgrading to the latest version of the combined device-mapper and lvm: 
2.02.47 appears to fix this issue.

Cheers,
Eddie