Re: [PATCH 0/2] ar9170-fw: Roll-your-own toolchain

[Jan Kiszka <jan.kiszka@web.de>]

[-- Attachment #1: Type: text/plain, Size: 1422 bytes --]

Johannes Berg wrote:
> On Sat, 2009-06-06 at 19:26 +0200, Jan Kiszka wrote:
> 
>> But does you device enter an endless reset loop?
>>
>> [ 5337.468082] usb 2-2: new high speed USB device using ehci_hcd and address 30
>> [ 5337.648024] usb 2-2: New USB device found, idVendor=07d1, idProduct=3c10
>> [ 5337.648032] usb 2-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
>> [ 5337.648038] usb 2-2: Product: USB2.0 WLAN
>> [ 5337.648042] usb 2-2: Manufacturer: ATHER
>> [ 5337.648046] usb 2-2: SerialNumber: 12345
>> [ 5337.648235] usb 2-2: configuration #1 chosen from 1 choice
>> [ 5337.764060] usb 2-2: reset high speed USB device using ehci_hcd and address 30
>> [ 5338.940054] usb 2-2: firmware: requesting ar9170.fw
>> [ 5340.552081] usb 2-2: device is in a bad state. please reconnect it!
>> [ 5341.552118] ar9170usb: probe of 2-2:1.0 failed with error -110
>> [ 5341.556838] usb 2-2: USB disconnect, address 30
>> [ 5341.800076] usb 2-2: new high speed USB device using ehci_hcd and address 31
>> ...
> 
> Yes. With the AP firmware, that is. I don't care about that firmware at
> all.

I do as it shall upgrade my soft-AP from an oldish rt2500 to this
dwa-160 stick.

Are you at least interested in porting the missing AP bits into the STA
version (likely the best long-term approach anyway)? And do you have a
rough idea which bits are missing / where to look at?

Jan


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 257 bytes --]