From mboxrd@z Thu Jan 1 00:00:00 1970 From: Frank Myhr Date: Mon, 08 Jun 2009 14:05:08 +0000 Subject: Re: [lm-sensors] hwmon-vid driver from linux 2.6.29 Message-Id: <4A2D1A94.6090101@fhmtech.com> List-Id: References: <4A0C6BF7.9010107@assembler.cz> In-Reply-To: <4A0C6BF7.9010107@assembler.cz> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Jean Delvare wrote: > You could contact the motherboard vendor and tell them about the > problem (the question is "Is VID5 properly routed from CPU to > IT8716F?") and see what they have to say about this. > > I don't really know how to work around this. I suspect that only the > late 0Fh family CPUs actually make use of VID5. If I am right then we > could tweak the hwmon-vid VRM selection table and use 5-pin VID (VRM > code 24) for some of the 0Fh family CPUs. I don't know where to put the > limit, and this is fixing the problem where it is not... which is > likely to cause even more problems on other systems in the future. > > Frank, can you please tell us for which 0Fh family CPU model you did > need the 6th VID pin decoding originally? Hi Jean and others, I'm sorry, that system is currently offline and I (not so) cleverly didn't back up log files so I don't have kernel-reported cpu info. But here is hardware spec: cpu: AMD Athlon X2 64 4850e, ADH4850IAA5DO mainboard: Gigabyte GA-MA770-DS3, IT8718 -Frank _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors