From: Sachin Sant <sachinp@in.ibm.com>
To: linuxppc-dev@ozlabs.org
Subject: 2.6.30-git3 boot failure on PowerPC
Date: Fri, 12 Jun 2009 14:32:40 +0530 [thread overview]
Message-ID: <4A3219B0.3040308@in.ibm.com> (raw)
2.6.30-git3 fails to boot on Power6 box with following messages
[boot]0020 XICS Init
Unable to handle kernel paging request for data at address 0x00000020
Faulting instruction address: 0xc0000000000cb7d8
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=1024 NUMA pSeries
Modules linked in:
NIP: c0000000000cb7d8 LR: c0000000000cb780 CTR: 0000000000000002
REGS: c000000000ef3020 TRAP: 0300 Not tainted (2.6.30-git3)
MSR: 8000000000001032 <ME,IR,DR> CR: 28000024 XER: 00000001
DAR: 0000000000000020, DSISR: 0000000040000000
TASK = c000000000e32b40[0] 'swapper' THREAD: c000000000ef0000 CPU: 0
GPR00: 0000000000000000 c000000000ef32a0 c000000000ef21b0 0000000000000000
GPR04: 0000000000000000 0000000000000390 0000000000000370 c000000001453ce8
GPR08: c0000000014435b0 0000000000000000 0000000000000000 c0000000008931f0
GPR12: 8000000000009032 c000000000ff2400 00000000029698f5 0000000002a75be8
GPR16: 0000000000000000 0000000002a75be8 0000000001b5fc90 0000000000000000
GPR20: 0000000000000000 00000000000080d0 ffffffffffffffff c000000000ef3a70
GPR24: c000000041fff8a8 c000000000fa35f0 c000000000f71300 c000000000ef3450
GPR28: 0000000000000000 c00000000113a100 c000000000e6ab68 c000000000ef32a0
NIP [c0000000000cb7d8] .getnstimeofday+0x8c/0x148
LR [c0000000000cb780] .getnstimeofday+0x34/0x148
Call Trace:
[c000000000ef3340] [c0000000000c3ba0] .ktime_get_ts+0x5c/0xbc
[c000000000ef33e0] [c0000000000c3c34] .ktime_get+0x34/0x88
[c000000000ef3480] [c0000000000d02fc] .tick_nohz_stop_sched_tick+0x90/0x43c
[c000000000ef3570] [c0000000000a3dac] .irq_exit+0xac/0xc8
[c000000000ef35f0] [c00000000002ce78] .timer_interrupt+0xe0/0x110
[c000000000ef3680] [c000000000003718] decrementer_common+0x118/0x180
--- Exception: 901 at .raw_local_irq_restore+0x74/0x8c
LR = .__slab_alloc+0x2e0/0x5bc
[c000000000ef3970] [c000000000ef3a10] init_thread_union+0x3a10/0x4000 (unreliable)
[c000000000ef3a00] [c0000000001845f0] .__slab_alloc+0x2e0/0x5bc
[c000000000ef3ae0] [c000000000186410] .__kmalloc+0x160/0x238
[c000000000ef3ba0] [c00000000004a608] .zalloc_maybe_bootmem+0x4c/0xa8
[c000000000ef3c30] [c00000000000d810] .irq_alloc_host+0x74/0x250
[c000000000ef3cf0] [c00000000084906c] .xics_init_IRQ+0x344/0x3e0
[c000000000ef3de0] [c000000000848394] .pseries_xics_init_IRQ+0x18/0x34
[c000000000ef3e60] [c00000000083387c] .init_IRQ+0x44/0x64
[c000000000ef3ee0] [c000000000830a78] .start_kernel+0x238/0x460
[c000000000ef3f90] [c0000000000083ec] .start_here_common+0x1c/0x30
Instruction dump:
7c2004ac 7b8007e1 41820010 7c210b78 7c421378 4bffffe8 ebbe8000 e93d0010
e95d0018 f93b0000 f95b0008 e87d0020 <e9230020> e8090000 f8410028 7c0903a6
---[ end trace 31fd0ba7d8756001 ]---
git2 boots fine with the same config.
I came across the following mail from Ben so this could be a know issue.
http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-June/073102.html
Thanks
-Sachin
--
---------------------------------
Sachin Sant
IBM Linux Technology Center
India Systems and Technology Labs
Bangalore, India
---------------------------------
next reply other threads:[~2009-06-12 9:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-12 9:02 Sachin Sant [this message]
2009-06-12 9:28 ` 2.6.30-git3 boot failure on PowerPC Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A3219B0.3040308@in.ibm.com \
--to=sachinp@in.ibm.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.