From: Yinghai Lu <yinghai@kernel.org>
To: "H. Peter Anvin" <hpa@zytor.com>
Cc: Cliff Wickman <cpw@sgi.com>,
linux-kernel@vger.kernel.org, "Huang,
Ying" <ying.huang@intel.com>,
pj@sgi.com
Subject: Re: [PATCH] x86: vendor reserved memory type
Date: Fri, 12 Jun 2009 11:17:49 -0700 [thread overview]
Message-ID: <4A329BCD.8070008@kernel.org> (raw)
In-Reply-To: <4A32980A.2020209@zytor.com>
H. Peter Anvin wrote:
> Yinghai, Huang, Paul: looks good to you [see patch at end]? Anyone else
> we should have look at this?
>
> -hpa
>
>
> Cliff Wickman wrote:
>>> There is no difference between that and E820_RESERVED, so there is no
>>> reason to distinguish them. The semantics are exactly the same.
>> I thought a new type would be clearer, but if it would break an e820
>> standard I withdraw the idea. All is good as long as the memory gets reserved.
>
> We *could* add private types with negative numbers if we had to, but
> that means adding some infrastructure, and this doesn't seem justified
> for this case. There is also a cost involved, since different types
> can't be range-merged.
>
>>> The real problem is that this condition is too lenient:
>>>
>>> if (md->attribute & EFI_MEMORY_WB)
>>> e820_type = E820_RAM;
>>> else
>>> e820_type = E820_RESERVED;
>>>
>>> It really should be something like:
>>>
>>> switch (md->type) {
>>> case EFI_LOADER_CODE:
>>> case EFI_LOADER_DATA:
>>> case EFI_BOOT_SERVICES_CODE:
>>> case EFI_BOOT_SERVICES_DATA:
>>> case EFI_CONVENTIONAL_MEMORY:
>>> if (md->attribute & EFI_MEMORY_WB)
>>> e820_type = E820_RAM;
>>> else
>>> e820_type = E820_RESERVED;
>>> break;
>>> case EFI_ACPI_RECLAIM_MEMORY:
>>> e820_type = E820_ACPI;
>>> break;
>>> case EFI_ACPI_MEMORY_NVS:
>>> e820_type = E820_NVS;
>>> break;
>>> case EFI_UNUSABLE_MEMORY:
>>> e820_type = E820_UNUSUABLE;
>>> break;
>>> default:
>>> e820_type = E820_RESERVED;
>>> break;
>>> }
>> Okay. I buy that as more straightforward.
>>
>>> Personally, it's not clear to me if this should do add any non-memory
>>> ranges, as the boot loader should have done that, but I guess in this
>>> particular case we have already horked out.
>>>
>>> Another problem is that the comment is wrong. sanitize_e820_map() will
>>> coalesce adjacent entries, as it should.
>>>
>>> Finally, randomly definiting a standard value in E820 with new semantics
>>> isn't going to fly; it's likely to conflict with official allocations.
>>>
>>> -hpa
>> I propose to submit your code (basically) in the form of the below patch.
>> It works for me. Does it look okay to you?
>>
>>
>>
>> Subject: [PATCH] x86: efi/e820 table merge fix
>>
>> This patch causes all the EFI_RESERVED_TYPE memory reservations to be recorded
>> in the e820 table as type E820_RESERVED.
>>
>> Without this patch EFI_RESERVED_TYPE memory reservations may be
>> marked usable in the e820 table. There may be a collision between
>> kernel use and some reserver's use of this memory.
>>
>> (An example use of this functionality is the UV system, which
>> will access extremely large areas of memory with a memory engine
>> that allows a user to address beyond the processor's range. Such
>> areas are reserved in the EFI table by the BIOS.
>> Some loaders have a restricted number of entries possible in the e820 table,
>> hence the need to record the reservations in the unrestricted EFI table.)
>>
>> The call to do_add_efi_memmap() is only made if "add_efi_memmap" is specified
>> on the kernel command line.
>>
>> Diffed against 2.6.30-rc8
>>
>> Signed-off-by: Cliff Wickman <cpw@sgi.com>
>> ---
>> arch/x86/kernel/efi.c | 31 ++++++++++++++++++++++++++++---
>> 1 file changed, 28 insertions(+), 3 deletions(-)
>>
>> Index: linux/arch/x86/kernel/efi.c
>> ===================================================================
>> --- linux.orig/arch/x86/kernel/efi.c
>> +++ linux/arch/x86/kernel/efi.c
>> @@ -240,10 +240,35 @@ static void __init do_add_efi_memmap(voi
>> unsigned long long size = md->num_pages << EFI_PAGE_SHIFT;
>> int e820_type;
>>
>> - if (md->attribute & EFI_MEMORY_WB)
>> - e820_type = E820_RAM;
>> - else
>> + switch (md->type) {
>> + case EFI_LOADER_CODE:
>> + case EFI_LOADER_DATA:
>> + case EFI_BOOT_SERVICES_CODE:
>> + case EFI_BOOT_SERVICES_DATA:
>> + case EFI_CONVENTIONAL_MEMORY:
>> + if (md->attribute & EFI_MEMORY_WB)
>> + e820_type = E820_RAM;
>> + else
>> + e820_type = E820_RESERVED;
>> + break;
>> + case EFI_ACPI_RECLAIM_MEMORY:
>> + e820_type = E820_ACPI;
>> + break;
>> + case EFI_ACPI_MEMORY_NVS:
>> + e820_type = E820_NVS;
>> + break;
>> + case EFI_UNUSABLE_MEMORY:
>> + e820_type = E820_UNUSABLE;
>> + break;
>> + default:
>> + /*
>> + * EFI_RESERVED_TYPE EFI_RUNTIME_SERVICES_CODE
>> + * EFI_RUNTIME_SERVICES_DATA EFI_MEMORY_MAPPED_IO
>> + * EFI_MEMORY_MAPPED_IO_PORT_SPACE EFI_PAL_CODE
>> + */
>> e820_type = E820_RESERVED;
then, if those entries are near TOML, and it is E820_RESERVED now, and it could not be directly mapped at first point.
but later efi_remap will direct map it if the size is too big for runtime service.
not sure others.
YH
>> + break;
>> + }
>> e820_add_region(start, size, e820_type);
>> }
>> sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
>>
next prev parent reply other threads:[~2009-06-12 18:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-11 14:27 [PATCH] x86: vendor reserved memory type Cliff Wickman
2009-06-11 15:34 ` H. Peter Anvin
2009-06-12 13:39 ` Cliff Wickman
2009-06-12 18:01 ` H. Peter Anvin
2009-06-12 18:17 ` Yinghai Lu [this message]
2009-06-12 18:20 ` H. Peter Anvin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A329BCD.8070008@kernel.org \
--to=yinghai@kernel.org \
--cc=cpw@sgi.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pj@sgi.com \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.