All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rini van Zetten <rini@arvoo.nl>
To: Kumar Gala <galak@kernel.crashing.org>
Cc: spi-devel-general@lists.sourceforge.net,
	linuxppc-dev list <Linuxppc-dev@ozlabs.org>
Subject: Re: [PATCH -mm v3][POWERPC] mpc8xxx : allow SPI without cs.
Date: Fri, 19 Jun 2009 09:26:08 +0200	[thread overview]
Message-ID: <4A3B3D90.5030100@arvoo.nl> (raw)
In-Reply-To: <EEB9B7B7-5456-4AE9-8BB9-96DA04320697@kernel.crashing.org>

This patch adds the possibility to have a spi device without a cs.

For example, the dts file should look something like this:

spi-controller {
        gpios = <&pio1 1 0      /* cs0 */
                 0              /* cs1, no GPIO */
                 &pio2 2 0>;    /* cs2 */

Signed-off-by: Rini van Zetten <rini@arvoo.nl>
---
Changes :
	patch against 2.6.30-rc8-mm1
	style updates
	compiler warning fix
comment :
	This feature is needed on our home made board to program an onboard fpga.
	The fpga needs some special pin toggling to put it in programming mode.
	That's why we want to skip the usual gpio cs and do the pin toggling
	in our driver
	

diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c
index 0fd0ec4..3a367ce 100644
--- a/drivers/spi/spi_mpc8xxx.c
+++ b/drivers/spi/spi_mpc8xxx.c
@@ -666,9 +666,12 @@ static void mpc8xxx_spi_cs_control(struct spi_device *spi, bool on)
  	struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(dev->platform_data);
  	u16 cs = spi->chip_select;
  	int gpio = pinfo->gpios[cs];
-	bool alow = pinfo->alow_flags[cs];

-	gpio_set_value(gpio, on ^ alow);
+	if (gpio != -EEXIST) {
+		bool alow = pinfo->alow_flags[cs];
+
+		gpio_set_value(gpio, on ^ alow);
+	}
  }

  static int of_mpc8xxx_spi_get_chipselects(struct device *dev)
@@ -707,27 +710,31 @@ static int of_mpc8xxx_spi_get_chipselects(struct device *dev)
  		enum of_gpio_flags flags;

  		gpio = of_get_gpio_flags(np, i, &flags);
-		if (!gpio_is_valid(gpio)) {
+		if (gpio_is_valid(gpio)) {
+			ret = gpio_request(gpio, dev_name(dev));
+			if (ret) {
+				dev_err(dev, "can't request gpio #%d: %d\n",
+							 i, ret);
+				goto err_loop;
+			}
+
+			pinfo->gpios[i] = gpio;
+			pinfo->alow_flags[i] = flags & OF_GPIO_ACTIVE_LOW;
+
+			ret = gpio_direction_output(pinfo->gpios[i],
+					pinfo->alow_flags[i]);
+			if (ret) {
+				dev_err(dev, "can't set output direction for"
+							"gpio #%d: %d\n",
+							i, ret);
+				goto err_loop;
+			}
+		} else if (gpio == -EEXIST) {
+			pinfo->gpios[i] = -EEXIST;
+		} else {
  			dev_err(dev, "invalid gpio #%d: %d\n", i, gpio);
  			goto err_loop;
  		}
-
-		ret = gpio_request(gpio, dev_name(dev));
-		if (ret) {
-			dev_err(dev, "can't request gpio #%d: %d\n", i, ret);
-			goto err_loop;
-		}
-
-		pinfo->gpios[i] = gpio;
-		pinfo->alow_flags[i] = flags & OF_GPIO_ACTIVE_LOW;
-
-		ret = gpio_direction_output(pinfo->gpios[i],
-					    pinfo->alow_flags[i]);
-		if (ret) {
-			dev_err(dev, "can't set output direction for gpio "
-				"#%d: %d\n", i, ret);
-			goto err_loop;
-		}
  	}

  	pdata->max_chipselect = ngpios;

  reply	other threads:[~2009-06-19  7:26 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-06-18  6:19 [PATCH -mm][POWERPC] mpc8xxx : allow SPI without cs Rini van Zetten
2009-06-18 12:42 ` Kumar Gala
2009-06-18 13:09 ` Anton Vorontsov
2009-06-18 14:04   ` Kumar Gala
2009-06-19  7:26     ` Rini van Zetten [this message]
2009-06-19  7:45       ` [PATCH -mm v3][POWERPC] " Kumar Gala
2009-06-19 11:16         ` Rini van Zetten
2009-06-19 13:45       ` Anton Vorontsov
2009-06-19 14:18         ` [PATCH -mm v4][POWERPC] " Rini van Zetten
2009-07-03  1:38           ` [spi-devel-general] " David Brownell
2009-06-19 11:45     ` [PATCH -mm][POWERPC] " Leon Woestenberg
2009-06-19 11:45       ` Leon Woestenberg
2009-06-19 13:25       ` Anton Vorontsov
2009-06-19 13:25         ` Anton Vorontsov
2009-06-19 15:31         ` Grant Likely
2009-06-19 15:31           ` Grant Likely

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4A3B3D90.5030100@arvoo.nl \
    --to=rini@arvoo.nl \
    --cc=Linuxppc-dev@ozlabs.org \
    --cc=galak@kernel.crashing.org \
    --cc=spi-devel-general@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.