From: Dmitri Seletski <drjoms@gmail.com>
To: ALSA development ML <alsa-devel@alsa-project.org>
Subject: Nmode issues
Date: Tue, 23 Jun 2009 01:14:00 +0100 [thread overview]
Message-ID: <4A401E48.6070109@gmail.com> (raw)
Hello Guys.
I got upgraded my kernel to
uname -a
Linux dimko 2.6.30 #3 SMP PREEMPT Mon Jun 22 23:58:16 IST 2009 x86_64
AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ AuthenticAMD GNU/Linux
i was able to make files now!(previously i couldnt)
make
make install
modprobe ath9k
[ 941.365887] f71882fg: Not a Fintek device
[ 941.365932] f71882fg: Found f71882fg chip at 0xa00, revision 32
[ 941.366116] f71882fg f71882fg.2560: Fan: 1 is in duty-cycle mode
[ 941.366118] f71882fg f71882fg.2560: Fan: 2 is in duty-cycle mode
[ 941.366119] f71882fg f71882fg.2560: Fan: 3 is in duty-cycle mode
[ 941.366121] f71882fg f71882fg.2560: Fan: 4 is in duty-cycle mode
[ 941.377478] k8temp 0000:00:18.3: Temperature readouts might be wrong
- check erratum #141
[ 956.642074] IRQ 19/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
[ 957.433234] IRQ 19/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
[ 1415.180230] AV200 0000:09:04.0: PCI INT A -> Link[LN4A] -> GSI 16
(level, low) -> IRQ 16
[ 1509.674361] cfg80211: Calling CRDA to update world regulatory domain
[ 1509.674399] general protection fault: 0000 [#1] PREEMPT SMP
[ 1509.674411] last sysfs file:
/sys/devices/pci0000:00/0000:00:04.1/usb2/2-1/2-1:1.0/host8/target8:0:0/8:0:0:0/block/sdd/sdd1/stat
[ 1509.674418] CPU 1
[ 1509.674422] Modules linked in: cfg80211 rfkill_backport snd_seq
snd_virtuoso snd_oxygen_lib snd_pcm snd_timer snd_page_alloc
snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore k8temp f71882fg
hwmon i2c_dev nvidia(P) i2c_core
[ 1509.674464] Pid: 29571, comm: modprobe Tainted: P 2.6.30 #3
MS-7375
[ 1509.674470] RIP: 0010:[<ffffffff810710f1>] [<ffffffff810710f1>]
module_put+0x31/0x80
[ 1509.674488] RSP: 0018:ffff880119cebf38 EFLAGS: 00010287
[ 1509.674493] RAX: 0000000000000001 RBX: ffffffffa0886d00 RCX:
0000000000000000
[ 1509.674498] RDX: ffff10013a92b6c0 RSI: 0000000000000000 RDI:
0000000000000001
[ 1509.674503] RBP: ffff880119cebf48 R08: 0000000000000000 R09:
0000000000000000
[ 1509.674508] R10: 0000000000000000 R11: 0000000000000000 R12:
0000000000000000
[ 1509.674513] R13: 00007f4dae114010 R14: 00000000006da7f0 R15:
00000000006da808
[ 1509.674519] FS: 00007f4dae1766f0(0000) GS:ffff88002803b000(0000)
knlGS:0000000000000000
[ 1509.674524] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1509.674529] CR2: 00007fb3a126d098 CR3: 000000010f527000 CR4:
00000000000006e0
[ 1509.674534] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 1509.674539] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 1509.674545] Process modprobe (pid: 29571, threadinfo
ffff880119cea000, task ffff880119d0c380)
[ 1509.674549] Stack:
[ 1509.674552] ffffffffa0886d00 ffffffffa0886d00 ffff880119cebf78
ffffffff810730ce
[ 1509.674560] 0000000000000000 00000000006da680 0000000000000000
00000000006da6e0
[ 1509.674569] 00000000006da680 ffffffff8100beeb 0000000000000246
00000000006da6c0
[ 1509.674578] Call Trace:
[ 1509.674583] [<ffffffff810730ce>] sys_init_module+0x10e/0x200
[ 1509.674592] [<ffffffff8100beeb>] system_call_fastpath+0x16/0x1b
[ 1509.674604] Code: 89 fb 48 83 ec 08 48 85 ff 74 44 bf 01 00 00 00 e8
25 d5 fc ff e8 d0 48 15 00 48 98 48 8b 93 f0 01 00 00 48 03 14 c5 20 70
67 81 <48> ff 0a 83 3b 02 74 23 bf 01 00 00 00 e8 6d d4 fc ff 65 48 8b
[ 1509.674680] RIP [<ffffffff810710f1>] module_put+0x31/0x80
[ 1509.674689] RSP <ffff880119cebf38>
[ 1509.674695] ---[ end trace 6aaa73f49bc73faf ]---
[ 1509.674701] note: modprobe[29571] exited with preempt_count 1
after i tried to unload drivers(dont remember nvidia ones or ath9k ones)
machine became unresponsive, i had to raise elephants. after which new
kernel did not reboot properly. recompiled, it from working kernel,
relaoded machine, everything seesm to be working now
however, i still get same issue.
pwd
/home/dimko/compat-wireless-2009-06-20
tcp dump -i wlan0 [start]
ip link set wlan0 start
iwconfig wlan0 essid dlink
dmesg
761.433090] wlan0: authenticated
[ 761.433094] wlan0: associate with AP 00:1e:58:b4:f6:83
[ 761.633264] wlan0: associate with AP 00:1e:58:b4:f6:83
[ 761.640078] wlan0: deauthenticated (Reason: 9)
[ 762.640264] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1
[ 762.643782] wlan0 direct probe responded
[ 762.643787] wlan0: authenticate with AP 00:1e:58:b4:f6:83
[ 762.648350] wlan0: authenticated
[ 762.648354] wlan0: associate with AP 00:1e:58:b4:f6:83
[ 762.848263] wlan0: associate with AP 00:1e:58:b4:f6:83
[ 762.855024] wlan0: deauthenticated (Reason: 9)
i
tcpdum [stop]
tcpdump -i wlan0
tcpdump: WARNING: wlan0: no IPv4 address assigned
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on wlan0, link-type EN10MB (Ethernet), capture size 96 bytes
^C
0 packets captured
0 packets received by filter
0 packets dropped by kernel
Same problem persist...
pstree -p
init(1)-+-acpid(4077)
|-agetty(4579)
|-agetty(4580)
|-agetty(4581)
|-agetty(4582)
|-bonobo-activati(5073)---{bonobo-activati}(5074)
|-console-kit-dae(4607)-+-{console-kit-dae}(4611)
| |-{console-kit-dae}(4615)
| |-{console-kit-dae}(4616)
| |-{console-kit-dae}(4617)
| |-{console-kit-dae}(4618)
| |-{console-kit-dae}(4620)
| |-{console-kit-dae}(4621)
| |-{console-kit-dae}(4622)
| |-{console-kit-dae}(4623)
| |-{console-kit-dae}(4624)
| |-{console-kit-dae}(4625)
| |-{console-kit-dae}(4626)
| |-{console-kit-dae}(4627)
| |-{console-kit-dae}(4628)
| |-{console-kit-dae}(4629)
| |-{console-kit-dae}(4630)
| |-{console-kit-dae}(4631)
| |-{console-kit-dae}(4632)
| |-{console-kit-dae}(4633)
| |-{console-kit-dae}(4634)
| |-{console-kit-dae}(4635)
| |-{console-kit-dae}(4636)
| |-{console-kit-dae}(4637)
| |-{console-kit-dae}(4638)
| |-{console-kit-dae}(4639)
| |-{console-kit-dae}(4640)
| |-{console-kit-dae}(4641)
| |-{console-kit-dae}(4642)
| |-{console-kit-dae}(4643)
| |-{console-kit-dae}(4644)
| |-{console-kit-dae}(4645)
| |-{console-kit-dae}(4646)
| |-{console-kit-dae}(4647)
| |-{console-kit-dae}(4648)
| |-{console-kit-dae}(4649)
| |-{console-kit-dae}(4650)
| |-{console-kit-dae}(4651)
| |-{console-kit-dae}(4652)
| |-{console-kit-dae}(4653)
| |-{console-kit-dae}(4654)
| |-{console-kit-dae}(4655)
| |-{console-kit-dae}(4656)
| |-{console-kit-dae}(4657)
| |-{console-kit-dae}(4658)
| |-{console-kit-dae}(4659)
| |-{console-kit-dae}(4660)
| |-{console-kit-dae}(4661)
| |-{console-kit-dae}(4662)
| |-{console-kit-dae}(4663)
| |-{console-kit-dae}(4664)
| |-{console-kit-dae}(4665)
| |-{console-kit-dae}(4666)
| |-{console-kit-dae}(4667)
| |-{console-kit-dae}(4668)
| |-{console-kit-dae}(4669)
| |-{console-kit-dae}(4670)
| |-{console-kit-dae}(4671)
| |-{console-kit-dae}(4672)
| |-{console-kit-dae}(4673)
| |-{console-kit-dae}(4877)
| |-{console-kit-dae}(4926)
| `-{console-kit-dae}(4983)
|-dbus-daemon(4233)
|-dbus-daemon(5021)
|-dbus-launch(5020)
|-dhcpcd(3192)
|-exaile(5149)
|-gconfd-2(5027)
|-gdm(4979)---gdm(4980)-+-X(4982)
| `-gnome-session(5005)-+-gnome-panel(5070)
| |-metacity(5066)
| |-nautilus(5077)
| |-seahorse-agent(5035)
| |-ssh-agent(5025)
| |-vino-server(5084)
|
`-{gnome-session}(5047)
|-gnome-dictionar(5098)
|-gnome-keyring-d(5044)
|-gnome-power-man(5103)
|-gnome-screensav(5065)
|-gnome-settings-(5048)---{gnome-settings-}(5052)
|-gnome-terminal(5163)-+-bash(5166)---su(5172)---bash(5175)
|
|-bash(5218)---su(5223)---bash(5226)---pstree(52+
| |-gnome-pty-helpe(5165)
| `-{gnome-terminal}(5168)
|-gnome-volume-ma(5104)
|-gvfs-hal-volume(5102)
|-gvfsd(5037)
|-gvfsd-burn(5119)
|-gvfsd-trash(5107)
|-hald(4292)---hald-runner(4293)-+-hald-addon-acpi(4307)
| |-hald-addon-cpuf(4306)
| |-hald-addon-inpu(4298)
| `-hald-addon-stor(4317)
|-login(4577)---bash(4878)
|-login(4578)---bash(4921)
|-mdadm(2738)
|-mixer_applet2(5090)---{mixer_applet2}(5117)
|-mozilla-launche(5121)---thunderbird-bin(5131)-+-{thunderbird-bin}(513+
|
|-{thunderbird-bin}(513+
|
|-{thunderbird-bin}(513+
|
|-{thunderbird-bin}(513+
|
|-{thunderbird-bin}(513+
|
|-{thunderbird-bin}(514+
|
|-{thunderbird-bin}(514+
|
`-{thunderbird-bin}(514+
|-multiload-apple(5080)
|-smartd(4507)
|-syslog-ng(4018)
`-udevd(932)
lsmod
Module Size Used by
ath9k 245620 0
mac80211 188280 1 ath9k
ath 9512 1 ath9k
cfg80211 98080 3 ath9k,mac80211,ath
rfkill_backport 21520 1 cfg80211
nvidia 8121160 36
f71882fg 28632 0
snd_seq 62016 0
output 3432 0
ext4 241640 1
jbd2 63000 1 ext4
crc16 1960 1 ext4
snd_virtuoso 14564 1
snd_oxygen_lib 34344 1 snd_virtuoso
snd_pcm 88816 1 snd_oxygen_lib
snd_timer 24536 2 snd_seq,snd_pcm
snd_page_alloc 9976 1 snd_pcm
snd_mpu401_uart 8424 1 snd_oxygen_lib
snd_rawmidi 23336 1 snd_mpu401_uart
snd_seq_device 7772 2 snd_seq,snd_rawmidi
snd 60968 10
snd_seq,snd_virtuoso,snd_oxygen_lib,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
r8169 37100 0
k8temp 5608 0
hwmon 2920 2 f71882fg,k8temp
soundcore 1648 1 snd
i2c_nforce2 8336 0
i2c_core 27328 2 nvidia,i2c_nforce2
next reply other threads:[~2009-06-23 0:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-23 0:14 Dmitri Seletski [this message]
2009-06-23 6:43 ` Nmode issues Clemens Ladisch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A401E48.6070109@gmail.com \
--to=drjoms@gmail.com \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.