Re: [PATCH] bnx2: Fix the behavior of ethtool when ONBOOT=no

[Naohiro Ooiwa <nooiwa@miraclelinux.com>]

Hi Michael

Thank you for quick reply and checking my patch.

You're right.
So, can we change the get_link method in ethtool ops.
The following is image.

How do you feel about this idea.


Best Regards,
Naohiro Ooiwa


Signed-off-by: Ooiwa Naohiro <nooiwa@miraclelinux.com>
---
 bnx2.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 9eee986..89cd235 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -6824,6 +6824,14 @@ bnx2_nway_reset(struct net_device *dev)
 }

 static int
+bnx2_get_link(struct net_device *dev)
+{
+	struct bnx2 *bp = netdev_priv(dev);
+
+	return bp->link_up;
+}
+
+static int
 bnx2_get_eeprom_len(struct net_device *dev)
 {
 	struct bnx2 *bp = netdev_priv(dev);
@@ -7390,7 +7398,7 @@ static const struct ethtool_ops bnx2_ethtool_ops = {
 	.get_wol		= bnx2_get_wol,
 	.set_wol		= bnx2_set_wol,
 	.nway_reset		= bnx2_nway_reset,
-	.get_link		= ethtool_op_get_link,
+	.get_link		= bnx2_get_link,
 	.get_eeprom_len		= bnx2_get_eeprom_len,
 	.get_eeprom		= bnx2_get_eeprom,
 	.set_eeprom		= bnx2_set_eeprom,




Michael Chan wrote:
> Naohiro Ooiwa wrote:
> 
>> Hi Michael
>>
>> I found a little bug.
>>
>> When configure in ifcfg-eth* is ONBOOT=no,
>> the behavior of ethtool command is wrong.
>>
>>     # grep ONBOOT /etc/sysconfig/network-scripts/ifcfg-eth2
>>     ONBOOT=no
>>     # ethtool eth2 | tail -n1
>>             Link detected: yes
>>
>> I think "Link detected" should be "no".
>>
>> The bnx2 driver should run netif_carrier_off() in initialization
>> until bnx2_open() is called.
>>
>> The following is my patch.
>> It move netif_carrier_off() to bnx2_init_one().
>> I had already tested this patch. The result is good for me.
>>
>> Could you please check the my patch ?
>>
>>
>> Best Regards,
>> Naohiro Ooiwa
>>
>>
>> Signed-off-by: Naohiro Ooiwa <nooiwa@meriraclelinux.com>
> 
> This patch will not work.  Calling netif_carrier_off() will schedule
> a link_watch event.  If register_netdev() fails for any reason, the
> netdev will be freed but the link_watch event can still be scheduled.
> 
> Calling netif_carrier_off() after register_netdev() returns also
> will not work because it can then race with ->open() and the interrupt
> that indicates link up.
> 
> Thanks.
> 
>> ---
>>  drivers/net/bnx2.c |    5 +++--
>>  1 files changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
>> index 38f1c33..9eee986 100644
>> --- a/drivers/net/bnx2.c
>> +++ b/drivers/net/bnx2.c
>> @@ -6151,8 +6151,6 @@ bnx2_open(struct net_device *dev)
>>       struct bnx2 *bp = netdev_priv(dev);
>>       int rc;
>>
>> -     netif_carrier_off(dev);
>> -
>>       bnx2_set_power_state(bp, PCI_D0);
>>       bnx2_disable_int(bp);
>>
>> @@ -8066,6 +8064,9 @@ bnx2_init_one(struct pci_dev *pdev,
>> const struct pci_device_id *ent)
>>       if (CHIP_NUM(bp) == CHIP_NUM_5709)
>>               dev->features |= NETIF_F_TSO6;
>>
>> +     /* Should set nocarrier until bnx2_open() is called */
>> +     netif_carrier_off(dev);
>> +
>>       if ((rc = register_netdev(dev))) {
>>               dev_err(&pdev->dev, "Cannot register net device\n");
>>               goto error;
>> --
>> 1.5.4.1
>>
>>
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>