[linux-dvb] Azurewave mantis problems

From: Claes Lindblom <claesl@gmail.com>
To: linux-dvb@linuxtv.org, claesl@gmail.com
Subject: [linux-dvb] Azurewave mantis problems
Date: Wed, 24 Jun 2009 14:19:52 +0200	[thread overview]
Message-ID: <4A4219E8.8000105@gmail.com> (raw)

Hi,
I'm running Ubuntu server 9.04 amd64 with kernel 2.6.28-11-server kernel.

When running s2-liplianin with my Azurewave AD-SP400 CI (Twinhan 
VP-1041) it stops working after a while and
if I do a dmesg I can see this every time it stops working. Sometimes I 
have to poweroff my computer because a reboot
will not fix the problem.

In this case it stopped working and then I tried to szap-s2 on the 
loopback device, hence the loopback messages.
And in this case a restart of sasc-ng solved the problem.

[14121.882131] stb6100_set_frequency: Frequency=1588000
[14121.890553] stb6100_get_frequency: Frequency=1587990
[14123.462841] stb6100_set_bandwidth: Bandwidth=43750000
[14123.471263] stb6100_get_bandwidth: Bandwidth=44000000
[14123.592134] stb6100_set_frequency: Frequency=1588000
[14123.600565] stb6100_get_frequency: Frequency=1587990
[14125.172875] stb6100_set_bandwidth: Bandwidth=43750000
[14125.181297] stb6100_get_bandwidth: Bandwidth=44000000
[14125.302134] stb6100_set_frequency: Frequency=1588000
[14125.310558] stb6100_get_frequency: Frequency=1587990
[14125.558992] mantis stop feed and dma
[14137.171642] mantis start feed & dma
[14137.212838] stb6100_set_bandwidth: Bandwidth=55997500
[14137.221261] stb6100_get_bandwidth: Bandwidth=56000000
[14137.248250] stb6100_get_bandwidth: Bandwidth=56000000
[14147.270027] mantis_ack_wait (0): Slave RACK Fail !
[14147.270387] stb6100_set_frequency: Invalid parameter
[14148.278112] dvblb_fake_ioctl interrupted: 2147774278
[14149.270047] dvblb_fake_ioctl failed: 1
[14149.392311] mantis stop feed and dma
[14157.420024] mantis_ack_wait (0): Slave RACK Fail !
[14157.420378] stb6100_get_frequency: Invalid parameter
[14167.460056] mantis_ack_wait (0): Slave RACK Fail !
[14167.460416] stb6100_get_bandwidth: Invalid parameter
[14169.144614] dvbloopback: Got wrong response (2147774278 != 1)
[14179.720049] mantis_ack_wait (0): Slave RACK Fail !
[14179.720410] stb6100_set_bandwidth: Invalid parameter
[14189.740037] mantis_ack_wait (0): Slave RACK Fail !
[14189.740397] stb6100_get_bandwidth: Invalid parameter
[14199.800030] mantis_ack_wait (0): Slave RACK Fail !
[14199.800390] stb6100_get_bandwidth: Invalid parameter
[14209.830047] mantis_ack_wait (0): Slave RACK Fail !
[14209.830407] stb6100_set_frequency: Invalid parameter
[14219.850026] mantis_ack_wait (0): Slave RACK Fail !
[14219.850386] stb6100_get_frequency: Invalid parameter
[14229.890048] mantis_ack_wait (0): Slave RACK Fail !
[14229.890408] stb6100_get_bandwidth: Invalid parameter
[14426.211181] mantis start feed & dma
[14426.252841] stb6100_set_bandwidth: Bandwidth=55997500
[14426.261263] stb6100_get_bandwidth: Bandwidth=56000000
[14426.288250] stb6100_get_bandwidth: Bandwidth=56000000
[14426.402142] stb6100_set_frequency: Frequency=1671000
[14426.410572] stb6100_get_frequency: Frequency=1670994
[14426.438715] stb6100_get_bandwidth: Bandwidth=56000000

Then I tried the initial mantis trre mantis-v4l I have to modprobe 
mantis to get it to load and the first channelscan with scan-s2
did not work, the second time worked and third and above did not work. 
Switching back to s2-liplianin it works again but stops working
after a while. Today I used szap on a DVB-S2 channel and after that it 
stopped working again.

I have had dvbloopback loaded and sasc-ng running but my tuning was on 
adapter 0 (not the loopback device)

Does anyone have any thoughts or clues about this. It feels like the 
driver are more unstable than about 6 month ago or it is
something with my Gigiabyte motherboard.

Regards
Claes

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb