Pinnacle Systems PCTV 330e and Hauppauge WinTV HVR 900 (R2) not working under Debian 2.6.30-1

[Jelle de Jong <jelledejong@powercraft.nl>]

[-- Attachment #1: Type: text/plain, Size: 535 bytes --]

Hi all,

This is sort of an updated report, I tested my em28xx based hybrid
devices again and the dvb-t still does not work under the 2.6.30 kernel.
I am not interested in the analog parts. So how is the process going on
getting support for dvb-t in the kernel. I am also not interested in any
non free non mainstream maintained code bases.

I believe I sent some em28xx devices to Devin, so how is the process
going, any luck?

Question for Antti if he had any luck with the devices (rtl2831-r2) I send?

Best regards,

Jelle de Jong

[-- Attachment #2: not-working-dvb-t-devices.txt --]
[-- Type: text/plain, Size: 8485 bytes --]

$ cat /proc/version
Linux version 2.6.30-1-686 (Debian 2.6.30-1) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-11) ) #1 SMP Sun Jun 14 16:11:32 UTC 2009

[ 2629.292634] usb 1-2: New USB device found, idVendor=2304, idProduct=0226
[ 2629.292648] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2629.292660] usb 1-2: Product: PCTV 330e
[ 2629.292669] usb 1-2: Manufacturer: Pinnacle Systems
[ 2629.292678] usb 1-2: SerialNumber: 070901090280
[ 2629.293003] usb 1-2: configuration #1 chosen from 1 choice
[ 2629.380840] Linux video capture interface: v2.00
[ 2629.458285] em28xx: New device Pinnacle Systems PCTV 330e @ 480 Mbps (2304:0226, interface 0, class 0)
[ 2629.458319] em28xx #0: Identified as Pinnacle Hybrid Pro (2) (card=56)
[ 2629.458684] em28xx #0: chip ID is em2882/em2883
[ 2629.632618] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c
[ 2629.632666] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[ 2629.632707] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
[ 2629.632747] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[ 2629.632787] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2629.632826] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2629.632865] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
[ 2629.632905] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[ 2629.632945] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
[ 2629.632985] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00
[ 2629.633039] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 37 00 30 00 39 00 30 00
[ 2629.633084] em28xx #0: i2c eeprom b0: 31 00 30 00 39 00 30 00 32 00 38 00 30 00 00 00
[ 2629.633124] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2629.633163] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2629.633203] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2629.633242] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2629.633287] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x87b3a5bf
[ 2629.633295] em28xx #0: EEPROM info:
[ 2629.633303] em28xx #0:   AC97 audio (5 sample rates)
[ 2629.633310] em28xx #0:   500mA max power
[ 2629.633321] em28xx #0:   Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[ 2629.633331] em28xx #0:
[ 2629.633335]
[ 2629.633345] em28xx #0: The support for this board weren't valid yet.
[ 2629.633354] em28xx #0: Please send a report of having this working
[ 2629.633363] em28xx #0: not to V4L mailing list (and/or to other addresses)
[ 2629.633369]
[ 2629.646677] tvp5150 1-005c: chip found @ 0xb8 (em28xx #0)
[ 2629.668207] tuner 1-0061: chip found @ 0xc2 (em28xx #0)
[ 2629.707303] xc2028 1-0061: creating new instance
[ 2629.707318] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[ 2629.707346] i2c-adapter i2c-1: firmware: requesting xc3028-v27.fw
[ 2629.725562] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 2629.776067] xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 2630.787641] xc2028 1-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 2630.804877] xc2028 1-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 2630.988331] em28xx #0: Config register raw data: 0xd0
[ 2630.989121] em28xx #0: AC97 vendor ID = 0xffffffff
[ 2630.989496] em28xx #0: AC97 features = 0x6a90
[ 2630.989506] em28xx #0: Empia 202 AC97 audio processor detected
[ 2631.116623] tvp5150 1-005c: tvp5150am1 detected.
[ 2631.237132] em28xx #0: v4l2 driver version 0.1.2
[ 2631.319217] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 2631.332140] usbcore: registered new interface driver em28xx
[ 2631.332159] em28xx driver loaded
[ 2631.385655] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 2631.385671] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 2631.387359] Em28xx: Initialized (Em28xx Audio Extension) extension
[ 2631.656608] tvp5150 1-005c: tvp5150am1 detected.

------------------------------------------------------------------------

[ 2749.140095] usb 1-2: new high speed USB device using ehci_hcd and address 9
[ 2749.277649] usb 1-2: New USB device found, idVendor=2040, idProduct=6502
[ 2749.277664] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 2749.277676] usb 1-2: Product: WinTV HVR-900
[ 2749.277685] usb 1-2: SerialNumber: 4030600678
[ 2749.278014] usb 1-2: configuration #1 chosen from 1 choice
[ 2749.278346] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0)
[ 2749.278373] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18)
[ 2749.278522] em28xx #0: chip ID is em2882/em2883
[ 2749.451506] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18
[ 2749.451553] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00
[ 2749.451594] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
[ 2749.451634] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00
[ 2749.451674] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2749.451714] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2749.451753] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00
[ 2749.451793] em28xx #0: i2c eeprom 70: 33 00 30 00 36 00 30 00 30 00 36 00 37 00 38 00
[ 2749.451833] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00
[ 2749.451873] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00
[ 2749.451913] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 38 89
[ 2749.451953] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 e6 15
[ 2749.451993] em28xx #0: i2c eeprom c0: 3e f0 74 02 01 00 01 79 01 00 00 00 00 00 00 00
[ 2749.452065] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 38 89
[ 2749.452106] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 e6 15
[ 2749.452146] em28xx #0: i2c eeprom f0: 3e f0 74 02 01 00 01 79 01 00 00 00 00 00 00 00
[ 2749.452191] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xa9c738dd
[ 2749.452199] em28xx #0: EEPROM info:
[ 2749.452207] em28xx #0:   AC97 audio (5 sample rates)
[ 2749.452214] em28xx #0:   500mA max power
[ 2749.452225] em28xx #0:   Table at 0x24, strings=0x1e82, 0x186a, 0x0000
[ 2749.457873] tveeprom 1-0050: Hauppauge model 65018, rev B3C0, serial# 4068838
[ 2749.457892] tveeprom 1-0050: tuner model is Xceive XC3028 (idx 120, type 71)
[ 2749.457908] tveeprom 1-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
[ 2749.457921] tveeprom 1-0050: audio processor is None (idx 0)
[ 2749.457932] tveeprom 1-0050: has radio
[ 2749.464515] tvp5150 1-005c: chip found @ 0xb8 (em28xx #0)
[ 2749.476442] tuner 1-0061: chip found @ 0xc2 (em28xx #0)
[ 2749.476916] xc2028 1-0061: creating new instance
[ 2749.476932] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[ 2749.476963] i2c-adapter i2c-1: firmware: requesting xc3028-v27.fw
[ 2749.499788] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 2749.548065] xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 2750.555404] xc2028 1-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 2750.572765] xc2028 1-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 2750.756462] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/input/input12
[ 2750.756939] em28xx #0: Config register raw data: 0xd0
[ 2750.757776] em28xx #0: AC97 vendor ID = 0xffffffff
[ 2750.758150] em28xx #0: AC97 features = 0x6a90
[ 2750.758164] em28xx #0: Empia 202 AC97 audio processor detected
[ 2750.900626] tvp5150 1-005c: tvp5150am1 detected.
[ 2751.038142] em28xx #0: v4l2 driver version 0.1.2
[ 2751.123980] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 2751.123991] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 2751.123997] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 2751.440613] tvp5150 1-005c: tvp5150am1 detected.