From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4A49DA4E.2020604@domain.hid> Date: Tue, 30 Jun 2009 11:26:38 +0200 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <4A48FB71.6070506@domain.hid> <4A49CD81.4060706@domain.hid> <4A49CFF0.7070202@domain.hid> <1246353623.7803.21.camel@domain.hid> <4A49D935.3060900@domain.hid> <1246353913.7803.24.camel@domain.hid> In-Reply-To: <1246353913.7803.24.camel@domain.hid> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-core] x86: Endless minor faults List-Id: Xenomai life and development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Philippe Gerum Cc: Jan Kiszka , xenomai-core Philippe Gerum wrote: > On Tue, 2009-06-30 at 11:21 +0200, Gilles Chanteperdrix wrote: >> Philippe Gerum wrote: >>> On Tue, 2009-06-30 at 10:42 +0200, Gilles Chanteperdrix wrote: >>>> Jan Kiszka wrote: >>>>> Jan Kiszka wrote: >>>>>> Hi all, >>>>>> >>>>>> seen such loops before? This particular trace is from a 2.6.29.3 kernel >>>>>> with ipipe-2.3-01 (SMP/PREEMPT_VOLUNTARY), but the same happens with >>>>>> 2.6.29.5/2.3-03: >>>>>> >>>>>> :| +func -653 0.084 __ipipe_handle_exception+0x11 (page_fault+0x26) >>>>>> :| +func -653 0.096 ipipe_check_context+0xd (__ipipe_handle_exception+0x71) >>>>>> :| #end 0x80000000 -653 0.069 do_page_fault+0x33 (__ipipe_handle_exception+0x1ff) >>>>>> : #func -653 0.078 __ipipe_unstall_root+0x9 (do_page_fault+0x3cb) >>>>>> :| #begin 0x80000000 -653 0.068 __ipipe_unstall_root+0x34 (do_page_fault+0x3cb) >>>>>> :| +end 0x80000000 -653 0.069 __ipipe_unstall_root+0x59 (do_page_fault+0x3cb) >>>>>> : +func -653 0.060 down_read_trylock+0x4 (do_page_fault+0x424) >>>>>> : +func -653 0.068 _spin_lock_irqsave+0x9 (__down_read_trylock+0x16) >>>>>> : +func -653 0.108 ipipe_check_context+0xd (_spin_lock_irqsave+0x1d) >>>>>> : #func -652 0.066 _spin_unlock_irqrestore+0x4 (__down_read_trylock+0x3f) >>>>>> : #func -652 0.069 __ipipe_restore_root+0x4 (_spin_unlock_irqrestore+0x21) >>>>>> : #func -652 0.074 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0x2c) >>>>>> :| #begin 0x80000000 -652 0.066 __ipipe_unstall_root+0x34 (__ipipe_restore_root+0x2c) >>>>>> :| +end 0x80000000 -652 0.069 __ipipe_unstall_root+0x59 (__ipipe_restore_root+0x2c) >>>>>> : +func -652 0.096 find_vma+0x4 (do_page_fault+0x465) >>>>>> : +func -652 0.150 ltt_run_filter_default+0x4 (_ltt_specialized_trace+0xc1) >>>>>> : +func -652 0.098 handle_mm_fault+0x11 (do_page_fault+0x537) >>>>>> : +func -652 0.090 _spin_lock+0x4 (handle_mm_fault+0x680) >>>>>> : +func -652 0.063 ptep_set_access_flags+0x9 (handle_mm_fault+0x6d1) >>>>>> : +func -652 0.282 flush_tlb_page+0xd (handle_mm_fault+0x6e7) >>>>>> : +func -651 0.162 ltt_run_filter_default+0x4 (_ltt_specialized_trace+0xc1) >>>>>> : +func -651 0.062 up_read+0x4 (do_page_fault+0x5a9) >>>>>> : +func -651 0.072 _spin_lock_irqsave+0x9 (__up_read+0x1c) >>>>>> : +func -651 0.117 ipipe_check_context+0xd (_spin_lock_irqsave+0x1d) >>>>>> : #func -651 0.074 _spin_unlock_irqrestore+0x4 (__up_read+0x92) >>>>>> : #func -651 0.069 __ipipe_restore_root+0x4 (_spin_unlock_irqrestore+0x21) >>>>>> : #func -651 0.060 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0x2c) >>>>>> :| #begin 0x80000000 -651 0.056 __ipipe_unstall_root+0x34 (__ipipe_restore_root+0x2c) >>>>>> :| +end 0x80000000 -651 0.420 __ipipe_unstall_root+0x59 (__ipipe_restore_root+0x2c) >>>>>> :| +func -650 0.084 __ipipe_handle_exception+0x11 (page_fault+0x26) >>>>>> >>>>>> and again and again... >>>>>> >>>>>> We are looping over a minor fault here (according to /proc/PID/stat), >>>>>> the context is a Xenomai task in secondary mode. As the task no longer >>>>>> processes signals in this state, the whole system is more or less >>>>>> broken. Tomorrow I will try to find out the faulting address with an >>>>>> instrumented kernel, but maybe you already have some ideas. >>>>> The fault is apparently triggered by __xn_put_user(XNRELAX, >>>>> thread->u_mode) in xnshadow_relax. thread->u_mode is pointing to an >>>>> invalid region ATM. The questions are now: Who corrupted this, user >>>>> space on init (not that likely) or kernel space later on (unpleasant >>>>> thought)? Moreover: Why can't we recover from a fault on u_mode? >>>> I already investigated such an issue, and my conclusion was that there >>>> are some places in the code where we can not cope with a fault. >>>> xnshadow_relax being such a place, because, if relax faults, then what >>>> will the fault handler do? Call relax again. Fortunately, mlockall and >>>> the nocow stuff fixes this. >>> >>> xnshadow_relax() faulting before the current thread bears the XNRELAX >>> bit would mean that a creepy issue involving ondemand PTEs in _kernel_ >>> space must have caused this. Having the init_mm mappings known from all >>> processes seems more relevant to this issue than anything nocow and/or >>> mlockall could ever do to fix it. >> u_mode is a user-space address. >> > > Why do you think xnshadow_relax() would be called for an already relaxed > thread? Because the fault happens before it has finished relaxing ? -- Gilles