From: Christian May <cmay@linux.vnet.ibm.com>
To: dm-devel@redhat.com
Subject: Failed path will not be recovered when disabling/enabling remote port
Date: Thu, 02 Jul 2009 13:27:11 +0200 [thread overview]
Message-ID: <4A4C998F.7010602@linux.vnet.ibm.com> (raw)
Hi,
I've setup an IBM z10 LPAR (mainframe server) with 2.6.30-kernel.
Attached to the System z10 was an IBM DS8000 storage server. 10x SCSI
LUNs were assigned to LPAR via two pathes:
Example:
36005076303ffc1040000000000001269 dm-9 IBM,2107900
size=1.0G features='1 queue_if_no_path' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=-2 status=active
|- 0:0:0:1080639506 sdw 65:96 active undef running
`- 1:0:1:1080639506 sdt 65:48 active undef running
Special parameter setting: dev_loss_tmo=90sec; fast_io_fail_tmo=5sec
multipath tools: multipath-tools v0.4.9 (04/04, 2009)
device-mapper: device-mapper-1.02.27-7.fc10.s390x,
device-mapper-libs-1.02.27-7.fc10.s390x
When removing a remote port (disabling a port on the BROCADE FC switch)
one path failed.
root@h42lp26/ESAME:~]
> multipath -l
36005076303ffc1040000000000001268 dm-8 ,
size=1.0G features='1 queue_if_no_path' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=-2 status=active
|- #:#:#:# - #:# failed undef running
`- 1:0:1:1080573970 sdr 65:16 active undef running
After a while (>90sec) SCSI LUNs were removed from system:
UEVENT[1246531815.619428] add /kernel/uids/74 (uids)
UDEV [1246531815.621708] add /kernel/uids/74 (uids)
UEVENT[1246531816.725299] remove /kernel/uids/74 (uids)
UDEV [1246531816.726151] remove /kernel/uids/74 (uids)
UEVENT[1246531929.959709] change /devices/virtual/block/dm-0 (block)
UEVENT[1246531929.959749] change /devices/virtual/block/dm-3 (block)
UEVENT[1246531929.959759] change /devices/virtual/block/dm-4 (block)
UEVENT[1246531929.959769] change /devices/virtual/block/dm-5 (block)
UEVENT[1246531929.966647] change /devices/virtual/block/dm-7 (block)
UDEV [1246531930.045444] change /devices/virtual/block/dm-4 (block)
UDEV [1246531930.048923] change /devices/virtual/block/dm-7 (block)
UDEV [1246531930.054614] change /devices/virtual/block/dm-0 (block)
UDEV [1246531930.060091] change /devices/virtual/block/dm-3 (block)
UDEV [1246531930.071744] change /devices/virtual/block/dm-5 (block)
UEVENT[1246531949.278541] change /devices/virtual/block/dm-9 (block)
UDEV [1246531949.369690] change /devices/virtual/block/dm-9 (block)
UEVENT[1246531950.295756] change /devices/virtual/block/dm-8 (block)
UEVENT[1246531950.297597] change /devices/virtual/block/dm-6 (block)
UEVENT[1246531950.297610] change /devices/virtual/block/dm-2 (block)
UEVENT[1246531950.297620] change /devices/virtual/block/dm-1 (block)
UDEV [1246531950.430097] change /devices/virtual/block/dm-8 (block)
UDEV [1246531950.588626] change /devices/virtual/block/dm-2 (block)
UDEV [1246531950.632482] change /devices/virtual/block/dm-1 (block)
UDEV [1246531950.634515] change /devices/virtual/block/dm-6 (block)
UEVENT[1246532034.277177] remove
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080377362/scsi_generic/sg0
(scsi_generic)
UEVENT[1246532034.277214] remove
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080377362/scsi_device/0:0:0:1080377362
(scsi_device)
UEVENT[1246532034.277226] remove
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080377362/scsi_disk/0:0:0:1080377362
(scsi_disk)
UEVENT[1246532034.277236] remove /devices/virtual/bdi/8:0 (bdi)
UEVENT[1246532034.277247] remove
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080377362/block/sda
(block)
UEVENT[1246532034.277258] remove
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080377362
(scsi)
UEVENT[1246532034.277384] remove
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080836114/scsi_generic/sg2
(scsi_generic)
UEVENT[1246532034.277594] remove
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080836114/scsi_device/0:0:0:1080836114
(scsi_device)
UEVENT[1246532034.277864] remove
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080836114/scsi_disk/0:0:0:1080836114
(scsi_disk)
UEVENT[1246532034.278035] remove /devices/virtual/bdi/8:32 (bdi)...
....
When re-enabling the path, SCSI LUNS were reassigned to system but path
didn't recover:
UEVENT[1246532107.387169] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080836114
(scsi)
UEVENT[1246532107.387209] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080836114/scsi_device/0:0:0:1080836114
(scsi_device)
UEVENT[1246532107.387220] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080836114/scsi_generic/sg0
(scsi_generic)
UEVENT[1246532107.387230] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080836114/scsi_disk/0:0:0:1080836114
(scsi_disk)
UEVENT[1246532107.388941] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080377362
(scsi)
UEVENT[1246532107.388952] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080377362/scsi_device/0:0:0:1080377362
(scsi_device)
UEVENT[1246532107.388963] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080377362/scsi_generic/sg2
(scsi_generic)
UEVENT[1246532107.397111] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080836114/block/sdu
(block)
UEVENT[1246532107.399249] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080639506
(scsi)
UEVENT[1246532107.399261] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080639506/scsi_device/0:0:0:1080639506
(scsi_device)
UEVENT[1246532107.399272] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080639506/scsi_generic/sg4
(scsi_generic)
UEVENT[1246532107.399711] add /devices/virtual/bdi/65:64 (bdi)
UEVENT[1246532107.399722] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080377362/scsi_disk/0:0:0:1080377362
(scsi_disk)
UEVENT[1246532107.401605] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080573970
(scsi)
UEVENT[1246532107.401617] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080573970/scsi_device/0:0:0:1080573970
(scsi_device)
UEVENT[1246532107.401628] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080573970/scsi_generic/sg6
(scsi_generic)
UEVENT[1246532107.403731] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080967186
(scsi)
UEVENT[1246532107.403742] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080967186/scsi_device/0:0:0:1080967186
(scsi_device)
UEVENT[1246532107.403753] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080967186/scsi_generic/sg8
(scsi_generic)
UEVENT[1246532107.405963] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080377362/block/sdv
(block)
UEVENT[1246532107.406168] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080901650
(scsi)
UEVENT[1246532107.407608] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080901650/scsi_device/0:0:0:1080901650
(scsi_device)
UEVENT[1246532107.407624] add
/devices/css0/0.0.0330/0.0.1780/host0/rport-0:0-0/target0:0:0/0:0:0:1080901650/scsi_generic/sg10
(scsi_generic)
UEVENT[1246532107.407880] add /devices/virtual/bdi/65:80 (bdi)
[root@h42lp26/ESAME:~]
> multipath -l
36005076303ffc1040000000000001268 dm-8 ,
size=1.0G features='1 queue_if_no_path' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=-2 status=active
|- #:#:#:# - #:# failed undef running
`- 1:0:1:1080573970 sdr 65:16 active undef running
Running "multipath" command will recover the failed path but that's not
way it should be...can somebody help to fix this? Why is the path not
recovered automatically?
Regards,
Christian May
next reply other threads:[~2009-07-02 11:27 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-02 11:27 Christian May [this message]
2009-07-02 11:44 ` Failed path will not be recovered when disabling/enabling remote port Hannes Reinecke
2009-07-02 13:06 ` Konrad Rzeszutek
2009-07-02 13:16 ` Hannes Reinecke
2009-07-20 16:46 ` Konrad Rzeszutek
2009-07-21 6:19 ` Hannes Reinecke
2009-07-21 21:42 ` Konrad Rzeszutek
2009-07-02 17:51 ` Chandra Seetharaman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A4C998F.7010602@linux.vnet.ibm.com \
--to=cmay@linux.vnet.ibm.com \
--cc=dm-devel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.