From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Date: Fri, 03 Jul 2009 10:29:02 +0000 Subject: Re: [lm-sensors] sensors.conf for im-645gse-a (msi9830) Message-Id: <4A4DDD6E.5010409@hhs.nl> List-Id: References: <4A4BA746.7050803@gmx.de> In-Reply-To: <4A4BA746.7050803@gmx.de> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hi, On 07/01/2009 08:13 PM, Thomas Ettwein wrote: > # lm_sensors configuration file for the MSI IM-945GSE-A motherboard > # Atom N270, Dual Gigabit Intel 82574L controllers, VGA, DVI > # 2009-07-01 Thomas Ettwein > Thanks, it has been added to the wiki: http://lm-sensors.org/wiki/Configurations/MSI/IM-945GSE-A Can you please also send me a private mail with the output of: dmidecode ? We plan to use that in the future to automatically identify motherboards and drop the right configuration in to place (for those boards where we have a configuration file for). Regards, Hans > chip "f71882fg-*" > > # Temperature > label temp1 "CPU" > label temp2 "Systemboard" > ignore temp3 > > # Fans > ignore fan1 # no connector on board > label fan2 "CPUFAN1" > ignore fan3 # no connector on board > ignore fan4 # no connector on board > > > # Voltage > label in0 "3.3V" > label in1 "Vcore" > label in2 "Vdimm" > label in3 "Vchip" > label in4 "+5V" > label in5 "12V" > label in6 "5VSB" > label in7 "3VSB" > label in8 "Battery" > > # never change the in0, in7 and in8 compute, these are hardwired in the chip! > compute in0 (@ * 2), (@ / 2) > compute in2 (@ * 2), (@ / 2) > compute in3 (@ * 2), (@ / 2) > compute in4 (@ * 5.25), (@ / 5.25) > compute in5 (@ * 12.83), (@ / 12.83) > compute in6 (@ * 5.25), (@ / 5.25) > compute in7 (@ * 2), (@ / 2) > compute in8 (@ * 2), (@ / 2) > _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors