Re: "EXT3-fs error" after resume from s2ram

[Christof Warlich <christof@warlich.name>]

[-- Attachment #1: Type: text/plain, Size: 1744 bytes --]

Robert Hancock schrieb:
> On 07/07/2009 03:13 AM, Christof Warlich wrote:
>> Christof Warlich schrieb:
>>> Do you think I can fix the issue and circumvent the BIOS by passing
>>> the real geomerty of the drive as kernel boot parameters? This may
>>> also have the nice side effect that I could utilize the full capacity
>>> of the drive. I'll definitly do some experiments in this direction and
>>> let you know immediately if I succeed. Please let me know if this may
>>> be a waste of time or if you know an appropriate fix.
>> I retried with the boot parameter hda=16383,16,63 according to the
>> values that I got from fdisk, but without success. Anyway, I would have
>> expected that the kernel may have had a way to set the LBA48 geometry
>> instead of CHS, but it looks like I'm on the wrong track here...
>
> That's an old IDE parameter, not a libata one, and 160GB is way too 
> large to be settable using CHS. What you likely want to do is pass the 
> ignore_hpa=1 option to libata when it's loaded - either 
> libata.ignore_hpa=1 on kernel command line, or in /etc/modprobe.conf 
> if it's a module (how exactly to do this depends on your 
> distribution). That way the protected area on the disk will get 
> disabled and you can use the full capacity.
Hmm - that doen't seem to fix it :-(:

After the reboot, fdisk still reports 137.4GB, and dmesg now contains 
the line:

ata1.00: device aborted resize (268435456 -> 312581808), skipping HPA 
handling

instead of

ata1.00: HPA detected: current 268435456, native 312581808

that we have seen without the libata.ignore_hpa=1 kernel command line 
option.

After s2ram -f -p, I still see the EXT3-fs error on resume. Is it worth 
to take another log from this suspend /resume cycle?

[-- Attachment #2: christof.vcf --]
[-- Type: text/x-vcard, Size: 278 bytes --]

begin:vcard
fn:Christof Warlich
n:Warlich;Christof
org:Warlich Consulting
adr:;;Am Haselhang 7;Hilpoltstein;Bayern;91161;Deutschland
email;internet:christof@warlich.name
tel;work:09174/492914
tel;home:09174/492914
x-mozilla-html:TRUE
url:www.warlich.name
version:2.1
end:vcard