All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wan ZongShun <mcuos.com@gmail.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Trilok Soni <soni.trilok@gmail.com>,
	linux-input@vger.kernel.org,
	linux-arm-kernel <linux-arm-kernel@lists.arm.linux.org.uk>
Subject: Re: [PATCH] input:Add clk api support for w90p910 touchscreen
Date: Wed, 08 Jul 2009 15:10:21 +0800	[thread overview]
Message-ID: <4A54465D.1020105@gmail.com> (raw)
In-Reply-To: <20090708065130.GD3309@dtor-d630.eng.vmware.com>

Dear Dmitry,

Okay, this clocken should be removed here.
I fixed up my patch and re-submitted it.
thanks a lot for your help.

Add clk api support for w90p910 touchscreen.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>

---
 drivers/input/touchscreen/w90p910_ts.c |   25 ++++++++++++-------------
 1 files changed, 12 insertions(+), 13 deletions(-)

diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c
index 6071f58..7bef19e 100644
--- a/drivers/input/touchscreen/w90p910_ts.c
+++ b/drivers/input/touchscreen/w90p910_ts.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/clk.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 
@@ -47,8 +48,8 @@ enum ts_state {
 struct w90p910_ts {
 	struct input_dev *input;
 	struct timer_list timer;
+	struct clk *clk;
 	int irq_num;
-	void __iomem *clocken;
 	void __iomem *ts_reg;
 	spinlock_t lock;
 	enum ts_state state;
@@ -166,8 +167,7 @@ static int w90p910_open(struct input_dev *dev)
 	unsigned long val;
 
 	/* enable the ADC clock */
-	val = __raw_readl(w90p910_ts->clocken);
-	__raw_writel(val | ADC_CLK_EN, w90p910_ts->clocken);
+	clk_enable(w90p910_ts->clk);
 
 	__raw_writel(ADC_RST1, w90p910_ts->ts_reg);
 	msleep(1);
@@ -211,8 +211,8 @@ static void w90p910_close(struct input_dev *dev)
 	del_timer_sync(&w90p910_ts->timer);
 
 	/* stop the ADC clock */
-	val = __raw_readl(w90p910_ts->clocken);
-	__raw_writel(val & ~ADC_CLK_EN, w90p910_ts->clocken);
+	clk_disable(w90p910_ts->clk);
+	clk_put(w90p910_ts->clk);
 }
 
 static int __devinit w90x900ts_probe(struct platform_device *pdev)
@@ -253,14 +253,12 @@ static int __devinit w90x900ts_probe(struct platform_device *pdev)
 		goto fail2;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!res) {
-		err = -ENXIO;
+	w90p910_ts->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(w90p910_ts->clk)) {
+		err = PTR_ERR(w90p910_ts->clk);
 		goto fail3;
 	}
 
-	w90p910_ts->clocken = (void __iomem *)res->start;
-
 	input_dev->name = "W90P910 TouchScreen";
 	input_dev->phys = "w90p910ts/event0";
 	input_dev->id.bustype = BUS_HOST;
@@ -283,18 +281,19 @@ static int __devinit w90x900ts_probe(struct platform_device *pdev)
 	if (request_irq(w90p910_ts->irq_num, w90p910_ts_interrupt,
 			IRQF_DISABLED, "w90p910ts", w90p910_ts)) {
 		err = -EBUSY;
-		goto fail3;
+		goto fail4;
 	}
 
 	err = input_register_device(w90p910_ts->input);
 	if (err)
-		goto fail4;
+		goto fail5;
 
 	platform_set_drvdata(pdev, w90p910_ts);
 
 	return 0;
 
-fail4:	free_irq(w90p910_ts->irq_num, w90p910_ts);
+fail5:	free_irq(w90p910_ts->irq_num, w90p910_ts);
+fail4:	clk_put(w90p910_ts->clk);
 fail3:	iounmap(w90p910_ts->ts_reg);
 fail2:	release_mem_region(res->start, res->end - res->start + 1);
 fail1:	input_free_device(input_dev);
-- 
1.5.6.3

  reply	other threads:[~2009-07-08  7:10 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-07-07 14:28 [PATCH] input:Add clk api support for w90p910 touchscreen Wan ZongShun
2009-07-07 17:19 ` Trilok Soni
2009-07-08  5:22   ` Wan ZongShun
2009-07-08  6:51     ` Dmitry Torokhov
2009-07-08  7:10       ` Wan ZongShun [this message]
2009-07-08 10:34         ` Trilok Soni
2009-07-08 14:06           ` Wan ZongShun
2009-07-08 14:21             ` Trilok Soni
2009-07-08 14:31               ` Wan ZongShun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4A54465D.1020105@gmail.com \
    --to=mcuos.com@gmail.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-arm-kernel@lists.arm.linux.org.uk \
    --cc=linux-input@vger.kernel.org \
    --cc=soni.trilok@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.