From: Zdenek Kaspar <zkaspar82@gmail.com>
To: Tejun Heo <tj@kernel.org>
Cc: linux-ide@vger.kernel.org
Subject: Re: AHCI: connection status changed + hard resetting link with 2.6.30+
Date: Wed, 15 Jul 2009 12:20:46 +0200 [thread overview]
Message-ID: <4A5DAD7E.8050309@gmail.com> (raw)
In-Reply-To: <4A5D981F.9020404@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 427 bytes --]
Tejun Heo napsal(a):
> Zdenek Kaspar wrote:
>> Hello Tejun, thanks for your reply. Attaching logs from my testing machine..
>>
>> I see this behavior on ICH7R with i3000 chipset too:
>> 00:1f.2 RAID bus controller [0104]: Intel Corporation 82801GR/GH (ICH7
>> Family) SATA RAID Controller [8086:27c3] (rev 01)
>
> Can you please apply the attached patch and report the resulting boot
> log? Thanks.
logs from 2.6.31-rc3
Z.
[-- Attachment #2: dmesg-2.6.31-rc3 --]
[-- Type: text/plain, Size: 40463 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-rc3 (root@merkur) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Wed Jul 15 11:41:02 CEST 2009
[ 0.000000] Command line: root=/dev/mapper/sda2_crypt ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f547000 (usable)
[ 0.000000] BIOS-e820: 000000007f547000 - 000000007f553000 (reserved)
[ 0.000000] BIOS-e820: 000000007f553000 - 000000007f637000 (usable)
[ 0.000000] BIOS-e820: 000000007f637000 - 000000007f6e8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6e8000 - 000000007f6eb000 (usable)
[ 0.000000] BIOS-e820: 000000007f6eb000 - 000000007f6f0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f6f0000 - 000000007f6f1000 (usable)
[ 0.000000] BIOS-e820: 000000007f6f1000 - 000000007f6ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f6ff000 - 000000007f700000 (usable)
[ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7f700 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 2 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007f700000
[ 0.000000] 0000000000 - 007f600000 page 2M
[ 0.000000] 007f600000 - 007f700000 page 4k
[ 0.000000] kernel direct mapping tables up to 7f700000 @ 8000-c000
[ 0.000000] RAMDISK: 37854000 - 37fef8e0
[ 0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL )
[ 0.000000] ACPI: RSDT 000000007f6fd038 00050 (v01 INTEL ECG3510M 00000073 01000013)
[ 0.000000] ACPI: FACP 000000007f6fc000 00074 (v01 INTEL ECG3510M 00000073 MSFT 01000013)
[ 0.000000] ACPI: DSDT 000000007f6f6000 05BEB (v01 INTEL ECG3510M 00000073 MSFT 01000013)
[ 0.000000] ACPI: FACS 000000007f693000 00040
[ 0.000000] ACPI: APIC 000000007f6f5000 00078 (v01 INTEL ECG3510M 00000073 MSFT 01000013)
[ 0.000000] ACPI: WDDT 000000007f6f4000 00040 (v01 INTEL ECG3510M 00000073 MSFT 01000013)
[ 0.000000] ACPI: MCFG 000000007f6f3000 0003C (v01 INTEL ECG3510M 00000073 MSFT 01000013)
[ 0.000000] ACPI: ASF! 000000007f6f2000 000A6 (v32 INTEL ECG3510M 00000073 MSFT 01000013)
[ 0.000000] ACPI: HPET 000000007f6f1000 00038 (v01 INTEL ECG3510M 00000073 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000007f6ef000 0020C (v01 INTEL CpuPm 00000073 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000007f6ee000 00175 (v01 INTEL Cpu0Ist 00000073 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000007f6ed000 00175 (v01 INTEL Cpu1Ist 00000073 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000007f6ec000 00175 (v01 INTEL Cpu2Ist 00000073 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000007f6eb000 00175 (v01 INTEL Cpu3Ist 00000073 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007f700000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007f700000
[ 0.000000] NODE_DATA [0000000000001000 - 0000000000004fff]
[ 0.000000] bootmap [000000000000a000 - 0000000000019edf] pages 10
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007f700000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000152280c] TEXT DATA BSS ==> [0001000000 - 000152280c]
[ 0.000000] #3 [0037854000 - 0037fef8e0] RAMDISK ==> [0037854000 - 0037fef8e0]
[ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
[ 0.000000] #5 [0001523000 - 000152314d] BRK ==> [0001523000 - 000152314d]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] found SMP MP-table at [ffff8800000fe200] fe200
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001a00000-ffff8800035fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000008f
[ 0.000000] 0: 0x00000100 -> 0x0007f547
[ 0.000000] 0: 0x0007f553 -> 0x0007f637
[ 0.000000] 0: 0x0007f6e8 -> 0x0007f6eb
[ 0.000000] 0: 0x0007f6f0 -> 0x0007f6f1
[ 0.000000] 0: 0x0007f6ff -> 0x0007f700
[ 0.000000] On node 0 totalpages: 521663
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 103 pages reserved
[ 0.000000] DMA zone: 3824 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7081 pages used for memmap
[ 0.000000] DMA32 zone: 510599 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007f547000 - 000000007f553000
[ 0.000000] PM: Registered nosave memory: 000000007f637000 - 000000007f6e8000
[ 0.000000] PM: Registered nosave memory: 000000007f6eb000 - 000000007f6f0000
[ 0.000000] PM: Registered nosave memory: 000000007f6f1000 - 000000007f6ff000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ff00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages at ffff880001534000, static data 72864 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514423
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/mapper/sda2_crypt ro
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2044360k/2087936k available (2790k kernel code, 1284k absent, 42292k reserved, 1375k data, 512k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2388.099 MHz processor.
[ 0.002347] Console: colour VGA+ 80x25
[ 0.002349] console [tty0] enabled
[ 0.007382] hpet clockevent registered
[ 0.007385] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.007436] Calibrating delay loop (skipped), value calculated using timer frequency.. 4776.19 BogoMIPS (lpj=23880990)
[ 0.007563] Security Framework initialized
[ 0.007608] SELinux: Disabled at boot.
[ 0.007807] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008969] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.009516] Mount-cache hash table entries: 256
[ 0.009685] Initializing cgroup subsys ns
[ 0.009730] Initializing cgroup subsys cpuacct
[ 0.009774] Initializing cgroup subsys devices
[ 0.009818] Initializing cgroup subsys freezer
[ 0.009860] Initializing cgroup subsys net_cls
[ 0.009921] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.009982] CPU: L2 cache: 4096K
[ 0.010000] CPU 0/0x0 -> Node 0
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 0
[ 0.010000] mce: CPU supports 6 MCE banks
[ 0.010000] CPU0: Thermal monitoring enabled (TM2)
[ 0.010000] using mwait in idle threads.
[ 0.010000] ACPI: Core revision 20090521
[ 0.011492] Setting APIC routing to flat
[ 0.011837] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.111909] CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
[ 0.120000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.010000] Initializing CPU#1
[ 0.010000] Calibrating delay using timer specific routine.. 4776.01 BogoMIPS (lpj=23880088)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 4096K
[ 0.010000] CPU 1/0x1 -> Node 0
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 1
[ 0.010000] mce: CPU supports 6 MCE banks
[ 0.010000] CPU1: Thermal monitoring enabled (TM2)
[ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.271245] CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
[ 0.271765] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.280023] Brought up 2 CPUs
[ 0.280064] Total of 2 processors activated (9552.21 BogoMIPS).
[ 0.280185] regulator: core version 0.5
[ 0.280185] NET: Registered protocol family 16
[ 0.280185] ACPI: bus type pci registered
[ 0.280185] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
[ 0.280185] PCI: Not using MMCONFIG.
[ 0.280185] PCI: Using configuration type 1 for base access
[ 0.280185] bio: create slab <bio-0> at 0
[ 0.280440] ACPI: EC: Look up EC in DSDT
[ 0.283373] ACPI: Interpreter enabled
[ 0.283416] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.283564] ACPI: Using IOAPIC for interrupt routing
[ 0.283640] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
[ 0.284334] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.292653] PCI: Using MMCONFIG at f0000000 - f7ffffff
[ 0.292707] ACPI: No dock devices found.
[ 0.292707] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.292707] pci 0000:00:02.0: reg 10 32bit mmio: [0x90100000-0x901fffff]
[ 0.292707] pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff]
[ 0.292707] pci 0000:00:02.0: reg 20 io port: [0x2410-0x2417]
[ 0.292707] pci 0000:00:02.1: reg 10 32bit mmio: [0x90000000-0x900fffff]
[ 0.292707] pci 0000:00:19.0: reg 10 32bit mmio: [0x90200000-0x9021ffff]
[ 0.292707] pci 0000:00:19.0: reg 14 32bit mmio: [0x90220000-0x90220fff]
[ 0.292707] pci 0000:00:19.0: reg 18 io port: [0x20e0-0x20ff]
[ 0.292707] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.292707] pci 0000:00:19.0: PME# disabled
[ 0.292707] pci 0000:00:1a.0: reg 20 io port: [0x20c0-0x20df]
[ 0.292707] pci 0000:00:1a.1: reg 20 io port: [0x20a0-0x20bf]
[ 0.292707] pci 0000:00:1a.7: reg 10 32bit mmio: [0x90221c00-0x90221fff]
[ 0.292707] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.292707] pci 0000:00:1a.7: PME# disabled
[ 0.292707] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.292707] pci 0000:00:1c.0: PME# disabled
[ 0.292707] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.292707] pci 0000:00:1c.1: PME# disabled
[ 0.292707] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.292707] pci 0000:00:1c.2: PME# disabled
[ 0.292707] pci 0000:00:1d.0: reg 20 io port: [0x2080-0x209f]
[ 0.292707] pci 0000:00:1d.1: reg 20 io port: [0x2060-0x207f]
[ 0.292707] pci 0000:00:1d.2: reg 20 io port: [0x2040-0x205f]
[ 0.292707] pci 0000:00:1d.7: reg 10 32bit mmio: [0x90221800-0x90221bff]
[ 0.292707] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.292707] pci 0000:00:1d.7: PME# disabled
[ 0.292707] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.300003] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.300053] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.300167] pci 0000:00:1f.2: reg 10 io port: [0x2408-0x240f]
[ 0.300172] pci 0000:00:1f.2: reg 14 io port: [0x241c-0x241f]
[ 0.300177] pci 0000:00:1f.2: reg 18 io port: [0x2400-0x2407]
[ 0.300182] pci 0000:00:1f.2: reg 1c io port: [0x2418-0x241b]
[ 0.300187] pci 0000:00:1f.2: reg 20 io port: [0x2020-0x203f]
[ 0.300192] pci 0000:00:1f.2: reg 24 32bit mmio: [0x90221000-0x902217ff]
[ 0.300215] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.300261] pci 0000:00:1f.2: PME# disabled
[ 0.300322] pci 0000:00:1f.3: reg 10 32bit mmio: [0x90222000-0x902220ff]
[ 0.300337] pci 0000:00:1f.3: reg 20 io port: [0x2000-0x201f]
[ 0.300478] pci 0000:03:00.0: reg 10 io port: [0x1018-0x101f]
[ 0.300486] pci 0000:03:00.0: reg 14 io port: [0x1024-0x1027]
[ 0.300495] pci 0000:03:00.0: reg 18 io port: [0x1010-0x1017]
[ 0.300503] pci 0000:03:00.0: reg 1c io port: [0x1020-0x1023]
[ 0.300511] pci 0000:03:00.0: reg 20 io port: [0x1000-0x100f]
[ 0.300526] pci 0000:03:00.0: reg 30 32bit mmio: [0xffff0000-0xffffffff]
[ 0.300603] pci 0000:00:1c.2: bridge io port: [0x1000-0x1fff]
[ 0.300651] pci 0000:00:1e.0: transparent bridge
[ 0.300716] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.300926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.301010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.301071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.301130] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.301426] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.301426] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.301426] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.301426] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.301426] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.301684] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.301996] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.302359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.302624] usbcore: registered new interface driver usbfs
[ 0.302624] usbcore: registered new interface driver hub
[ 0.302624] usbcore: registered new device driver usb
[ 0.302624] PCI: Using ACPI for IRQ routing
[ 0.330031] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.330158] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.360046] pnp: PnP ACPI init
[ 0.360101] ACPI: bus type pnp registered
[ 0.362582] pnp: PnP ACPI: found 11 devices
[ 0.362625] ACPI: ACPI bus type pnp unregistered
[ 0.362674] system 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved
[ 0.362724] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[ 0.362774] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.362823] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.362872] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.362922] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.362971] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.363021] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
[ 0.363070] system 00:01: iomem range 0xc0000-0xdffff has been reserved
[ 0.363119] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[ 0.363171] system 00:06: ioport range 0x500-0x53f has been reserved
[ 0.363219] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.363266] system 00:06: ioport range 0x360-0x361 has been reserved
[ 0.363314] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 0.368310] pci 0000:03:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff]
[ 0.368403] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.368449] pci 0000:00:1c.0: IO window: disabled
[ 0.368495] pci 0000:00:1c.0: MEM window: disabled
[ 0.368541] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.368587] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.368634] pci 0000:00:1c.1: IO window: disabled
[ 0.368680] pci 0000:00:1c.1: MEM window: disabled
[ 0.368725] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.368772] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[ 0.368819] pci 0000:00:1c.2: IO window: 0x1000-0x1fff
[ 0.368866] pci 0000:00:1c.2: MEM window: disabled
[ 0.368912] pci 0000:00:1c.2: PREFETCH window: 0x90300000-0x903fffff
[ 0.368961] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.369007] pci 0000:00:1e.0: IO window: disabled
[ 0.369053] pci 0000:00:1e.0: MEM window: disabled
[ 0.369098] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.369150] alloc irq_desc for 17 on node 0
[ 0.369152] alloc kstat_irqs on node 0
[ 0.369156] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.369206] pci 0000:00:1c.0: setting latency timer to 64
[ 0.369211] alloc irq_desc for 16 on node 0
[ 0.369213] alloc kstat_irqs on node 0
[ 0.369216] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.369265] pci 0000:00:1c.1: setting latency timer to 64
[ 0.369271] alloc irq_desc for 18 on node 0
[ 0.369272] alloc kstat_irqs on node 0
[ 0.369275] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.369324] pci 0000:00:1c.2: setting latency timer to 64
[ 0.369329] pci 0000:00:1e.0: setting latency timer to 64
[ 0.369332] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.369334] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.369337] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
[ 0.369339] pci_bus 0000:03: resource 2 pref mem [0x90300000-0x903fffff]
[ 0.369341] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.369343] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.369386] NET: Registered protocol family 2
[ 0.369537] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.370202] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.371779] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.372356] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.372405] TCP reno registered
[ 0.372572] NET: Registered protocol family 1
[ 0.372671] Trying to unpack rootfs image as initramfs...
[ 0.501898] Switched to high resolution mode on CPU 1
[ 0.510049] Switched to high resolution mode on CPU 0
[ 0.553381] Freeing initrd memory: 7790k freed
[ 0.557046] audit: initializing netlink socket (disabled)
[ 0.557114] type=2000 audit(1247659922.551:1): initialized
[ 0.557381] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.557522] VFS: Disk quotas dquot_6.5.2
[ 0.557589] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.557686] msgmni has been set to 4008
[ 0.557861] alg: No test for stdrng (krng)
[ 0.557950] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.558015] io scheduler noop registered
[ 0.558057] io scheduler anticipatory registered
[ 0.558100] io scheduler deadline registered (default)
[ 0.558154] io scheduler cfq registered
[ 0.558206] pci 0000:00:02.0: Boot video device
[ 0.558642] alloc irq_desc for 24 on node 0
[ 0.558644] alloc kstat_irqs on node 0
[ 0.558655] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.558662] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.558838] alloc irq_desc for 25 on node 0
[ 0.558840] alloc kstat_irqs on node 0
[ 0.558846] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.558852] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.559023] alloc irq_desc for 26 on node 0
[ 0.559024] alloc kstat_irqs on node 0
[ 0.559030] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.559036] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.561942] Linux agpgart interface v0.103
[ 0.561987] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.562145] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.562363] Platform driver 'serial8250' needs updating - please use dev_pm_ops
[ 0.562666] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.564318] brd: module loaded
[ 0.564419] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.564653] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.564700] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.564778] Platform driver 'i8042' needs updating - please use dev_pm_ops
[ 0.565235] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.565404] mice: PS/2 mouse device common for all mice
[ 0.565498] rtc_cmos 00:03: RTC can wake from S4
[ 0.565587] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.565654] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.565729] cpuidle: using governor ladder
[ 0.565772] cpuidle: using governor menu
[ 0.565816] No iBFT detected.
[ 0.566104] TCP cubic registered
[ 0.566178] NET: Registered protocol family 10
[ 0.566581] lo: Disabled Privacy Extensions
[ 0.566839] Mobile IPv6
[ 0.566878] NET: Registered protocol family 17
[ 0.567044] registered taskstats version 1
[ 0.567206] rtc_cmos 00:03: setting system clock to 2009-07-15 12:12:03 UTC (1247659923)
[ 0.567324] Freeing unused kernel memory: 512k freed
[ 0.593068] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.680043] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 0.680109] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.680204] alloc irq_desc for 20 on node 0
[ 0.680206] alloc kstat_irqs on node 0
[ 0.680213] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.680268] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.680329] alloc irq_desc for 27 on node 0
[ 0.680330] alloc kstat_irqs on node 0
[ 0.680338] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[ 0.720496] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.756400] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.756451] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 0.787913] SCSI subsystem initialized
[ 0.816276] libata version 3.00 loaded.
[ 0.850533] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.850626] pata_jmicron 0000:03:00.0: setting latency timer to 64
[ 0.850675] scsi0 : pata_jmicron
[ 0.850787] scsi1 : pata_jmicron
[ 0.851339] ata1: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 18
[ 0.851389] ata2: PATA max UDMA/100 cmd 0x1010 ctl 0x1020 bmdma 0x1008 irq 18
[ 0.962535] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:5a:d8:ba
[ 0.962604] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 0.962672] 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff
[ 0.962773] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.962828] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.962831] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.962913] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.963007] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020c0
[ 0.963085] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.963133] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.963197] usb usb1: Product: UHCI Host Controller
[ 0.963241] usb usb1: Manufacturer: Linux 2.6.31-rc3 uhci_hcd
[ 0.963286] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.963367] usb usb1: configuration #1 chosen from 1 choice
[ 0.963436] hub 1-0:1.0: USB hub found
[ 0.963482] hub 1-0:1.0: 2 ports detected
[ 0.963605] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.963668] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.963671] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.963738] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2
[ 0.967697] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.967743] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.967748] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x90221c00
[ 1.000064] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.000134] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.000187] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.000255] usb usb2: Product: EHCI Host Controller
[ 1.000312] usb usb2: Manufacturer: Linux 2.6.31-rc3 ehci_hcd
[ 1.000357] usb usb2: SerialNumber: 0000:00:1a.7
[ 1.000436] usb usb2: configuration #1 chosen from 1 choice
[ 1.000502] hub 2-0:1.0: USB hub found
[ 1.000548] hub 2-0:1.0: 4 ports detected
[ 1.000663] ahci 0000:00:1f.2: version 3.0
[ 1.000672] alloc irq_desc for 19 on node 0
[ 1.000674] alloc kstat_irqs on node 0
[ 1.000678] ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.000746] alloc irq_desc for 28 on node 0
[ 1.000748] alloc kstat_irqs on node 0
[ 1.000754] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 1.000807] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.000874] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems
[ 1.000940] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.000987] ata4294967295: XXX port freeze
[ 1.020055] ata4294967295: XXX port freeze
[ 1.040061] ata4294967295: XXX port freeze
[ 1.060082] ata4294967295: XXX port freeze
[ 1.060168] scsi2 : ahci
[ 1.060281] scsi3 : ahci
[ 1.060375] scsi4 : ahci
[ 1.062246] scsi5 : ahci
[ 1.062329] scsi6 : ahci
[ 1.062409] scsi7 : ahci
[ 1.062552] ata3: SATA max UDMA/133 abar m2048@0x90221000 port 0x90221100 irq 28
[ 1.062618] ata4: SATA max UDMA/133 abar m2048@0x90221000 port 0x90221180 irq 28
[ 1.062682] ata5: DUMMY
[ 1.062720] ata6: DUMMY
[ 1.062759] ata7: SATA max UDMA/133 abar m2048@0x90221000 port 0x90221300 irq 28
[ 1.062824] ata8: SATA max UDMA/133 abar m2048@0x90221000 port 0x90221380 irq 28
[ 1.062948] ata4: XXX port freeze
[ 1.062992] ata4: XXX hardresetting link, stopping engine
[ 1.063038] ata4: XXX flipping SControl
[ 1.063124] ata7: XXX port freeze
[ 1.063164] ata7: XXX hardresetting link, stopping engine
[ 1.063210] ata7: XXX flipping SControl
[ 1.063265] ata8: XXX port freeze
[ 1.063305] ata8: XXX hardresetting link, stopping engine
[ 1.063352] ata8: XXX flipping SControl
[ 1.064840] alloc irq_desc for 21 on node 0
[ 1.064842] alloc kstat_irqs on node 0
[ 1.064846] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.064903] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.064906] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.064997] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[ 1.065094] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000020a0
[ 1.065167] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.065215] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.065279] usb usb3: Product: UHCI Host Controller
[ 1.065323] usb usb3: Manufacturer: Linux 2.6.31-rc3 uhci_hcd
[ 1.065368] usb usb3: SerialNumber: 0000:00:1a.1
[ 1.065450] usb usb3: configuration #1 chosen from 1 choice
[ 1.065517] hub 3-0:1.0: USB hub found
[ 1.065562] hub 3-0:1.0: 2 ports detected
[ 1.066385] alloc irq_desc for 23 on node 0
[ 1.066387] alloc kstat_irqs on node 0
[ 1.066391] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.066448] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.066451] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.066521] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 1.070489] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.070536] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.070547] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90221800
[ 1.074659] ata3: XXX port freeze
[ 1.074700] ata3: XXX hardresetting link, stopping engine
[ 1.074746] ata3: XXX flipping SControl
[ 1.090076] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.090142] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.090195] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.090263] usb usb4: Product: EHCI Host Controller
[ 1.090319] usb usb4: Manufacturer: Linux 2.6.31-rc3 ehci_hcd
[ 1.090364] usb usb4: SerialNumber: 0000:00:1d.7
[ 1.090443] usb usb4: configuration #1 chosen from 1 choice
[ 1.090511] hub 4-0:1.0: USB hub found
[ 1.090556] hub 4-0:1.0: 6 ports detected
[ 1.091483] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.091537] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.091540] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.091616] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.091701] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080
[ 1.091772] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.091820] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.091884] usb usb5: Product: UHCI Host Controller
[ 1.091928] usb usb5: Manufacturer: Linux 2.6.31-rc3 uhci_hcd
[ 1.091974] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.092052] usb usb5: configuration #1 chosen from 1 choice
[ 1.092118] hub 5-0:1.0: USB hub found
[ 1.092165] hub 5-0:1.0: 2 ports detected
[ 1.093093] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.093146] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.093148] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.093219] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.093308] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
[ 1.093380] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.093428] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.093492] usb usb6: Product: UHCI Host Controller
[ 1.093536] usb usb6: Manufacturer: Linux 2.6.31-rc3 uhci_hcd
[ 1.093582] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.093659] usb usb6: configuration #1 chosen from 1 choice
[ 1.093725] hub 6-0:1.0: USB hub found
[ 1.093770] hub 6-0:1.0: 2 ports detected
[ 1.094745] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.094797] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.094800] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.094870] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.094953] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[ 1.095025] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.095073] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.095137] usb usb7: Product: UHCI Host Controller
[ 1.095181] usb usb7: Manufacturer: Linux 2.6.31-rc3 uhci_hcd
[ 1.095226] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.095306] usb usb7: configuration #1 chosen from 1 choice
[ 1.095372] hub 7-0:1.0: USB hub found
[ 1.095418] hub 7-0:1.0: 2 ports detected
[ 1.411279] ata8: XXX starting engine
[ 1.411327] ata8: XXX rc=0, class=1
[ 1.411372] ata8: XXX clearing IRQs for thawing
[ 1.411419] ata8: XXX port thawed
[ 1.411467] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.411471] ata3: XXX irq_stat=400040 CONN|PHY
[ 1.411475] ata3: XXX port freeze
[ 1.411480] ata7: XXX irq_stat=400040 CONN|PHY
[ 1.411483] ata7: XXX port freeze
[ 1.411701] ata4: XXX starting engine
[ 1.411743] ata4: XXX rc=0, class=0
[ 1.411785] ata4: XXX clearing IRQs for thawing
[ 1.411828] ata4: XXX port thawed
[ 1.411870] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.411921] ata7: XXX starting engine
[ 1.411964] ata7: XXX rc=0, class=1
[ 1.412006] ata7: XXX clearing IRQs for thawing
[ 1.412049] ata7: XXX port thawed
[ 1.412092] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.420049] ata3: XXX starting engine
[ 1.420096] ata3: XXX rc=0, class=1
[ 1.420142] ata3: XXX clearing IRQs for thawing
[ 1.420188] ata3: XXX port thawed
[ 1.420234] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.453029] ata7.00: ATA-7: ST3400620NS, 3.AEG, max UDMA/133
[ 1.453079] ata7.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.459401] ata8.00: ATA-7: ST3400620NS, 3.AEG, max UDMA/133
[ 1.459451] ata8.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.496647] ata3.00: ATA-8: WDC WD2502ABYS-01B7A0, 02.03B02, max UDMA/133
[ 1.496700] ata3.00: 490350672 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.497695] ata3.00: configured for UDMA/133
[ 1.497748] ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4
[ 1.497808] ata3: irq_stat 0x00400040, connection status changed
[ 1.497857] ata3: XXX port freeze
[ 1.497898] ata3: hard resetting link
[ 1.497939] ata3: XXX hardresetting link, stopping engine
[ 1.497984] ata3: XXX flipping SControl
[ 1.511352] ata7.00: configured for UDMA/133
[ 1.511403] ata7: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4
[ 1.511454] ata7: irq_stat 0x00400040, connection status changed
[ 1.511508] ata7: XXX port freeze
[ 1.511561] ata7: hard resetting link
[ 1.511601] ata7: XXX hardresetting link, stopping engine
[ 1.511647] ata7: XXX flipping SControl
[ 1.517725] ata8.00: configured for UDMA/133
[ 2.250048] ata3: XXX starting engine
[ 2.250094] ata3: XXX rc=0, class=1
[ 2.250139] ata3: XXX clearing IRQs for thawing
[ 2.250186] ata3: XXX port thawed
[ 2.250232] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.252466] ata3.00: configured for UDMA/133
[ 2.252513] ata3: EH complete
[ 2.252657] scsi 2:0:0:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.260110] ata7: XXX starting engine
[ 2.260156] ata7: XXX rc=0, class=1
[ 2.260201] ata7: XXX clearing IRQs for thawing
[ 2.260248] ata7: XXX port thawed
[ 2.260293] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.352600] ata7.00: configured for UDMA/133
[ 2.352647] ata7: EH complete
[ 2.352760] scsi 6:0:0:0: Direct-Access ATA ST3400620NS 3.AE PQ: 0 ANSI: 5
[ 2.352948] scsi 7:0:0:0: Direct-Access ATA ST3400620NS 3.AE PQ: 0 ANSI: 5
[ 2.360382] Uniform Multi-Platform E-IDE driver
[ 2.415567] sd 2:0:0:0: [sda] 490350672 512-byte logical blocks: (251 GB/233 GiB)
[ 2.415665] sd 2:0:0:0: [sda] Write Protect is off
[ 2.415712] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.415728] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.415891] sda:
[ 2.415950] sd 6:0:0:0: [sdb] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 2.416076] sd 6:0:0:0: [sdb] Write Protect is off
[ 2.416122] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.416138] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.416281] sdb:
[ 2.416330] sd 7:0:0:0: [sdc] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 2.416455] sd 7:0:0:0: [sdc] Write Protect is off
[ 2.416500] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.416516] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.418433] sdc: sda1 sda2
[ 2.421587] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.431946] sdc1
[ 2.432196] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 2.433883] sdb1
[ 2.434126] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 2.628814] md: raid1 personality registered for level 1
[ 2.634179] md: md0 stopped.
[ 2.656893] md: bind<sdc1>
[ 2.657136] md: bind<sdb1>
[ 2.664053] raid1: raid set md0 active with 2 out of 2 mirrors
[ 2.664220] md0: unknown partition table
[ 2.734343] device-mapper: uevent: version 1.0.3
[ 2.734655] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 13.314171] kjournald starting. Commit interval 5 seconds
[ 13.314227] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.875488] udevd version 125 started
[ 16.277158] agpgart-intel 0000:00:00.0: Intel G35 Chipset
[ 16.278084] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 16.280905] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 16.475037] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 16.475109] ACPI: Power Button [PWRF]
[ 16.475201] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 16.475271] ACPI: Sleep Button [SLPB]
[ 16.500061] processor LNXCPU:00: registered as cooling_device0
[ 16.500111] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 16.500279] processor LNXCPU:01: registered as cooling_device1
[ 16.500328] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 16.510322] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 16.510431] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
[ 16.510547] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.565056] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 16.701647] Platform driver 'pcspkr' needs updating - please use dev_pm_ops
[ 16.701757] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 16.714492] Platform driver 'pcspkr' needs updating - please use dev_pm_ops
[ 16.714548] Error: Driver 'pcspkr' is already registered, aborting...
[ 18.530220] EXT3 FS on dm-0, internal journal
[ 19.325743] loop: module loaded
[ 19.844067] fuse init (API version 7.12)
[ 19.959518] kjournald starting. Commit interval 5 seconds
[ 19.959745] EXT3 FS on sda1, internal journal
[ 19.959807] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.420319] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[ 21.480046] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[ 21.480391] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.171501] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 24.171811] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 34.790006] eth0: no IPv6 routers present
next prev parent reply other threads:[~2009-07-15 10:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-04 22:02 AHCI: connection status changed + hard resetting link with 2.6.30+ Zdenek Kaspar
2009-07-08 22:45 ` Tejun Heo
2009-07-09 1:23 ` Zdenek Kaspar
2009-07-15 8:49 ` Tejun Heo
2009-07-15 10:20 ` Zdenek Kaspar [this message]
2009-07-16 3:47 ` Tejun Heo
2009-07-16 13:47 ` Zdenek Kaspar
2009-07-17 2:30 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A5DAD7E.8050309@gmail.com \
--to=zkaspar82@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.