From mboxrd@z Thu Jan 1 00:00:00 1970 From: Frank Subject: Re: Testers wanted: New SB X-Fi driver Date: Thu, 16 Jul 2009 12:37:04 +0200 Message-ID: <4A5F02D0.5080200@freenet.de> References: <4A5DB59B.2010407@freenet.de> <4A5F016F.1030305@freenet.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mout5.freenet.de (mout5.freenet.de [195.4.92.95]) by alsa0.perex.cz (Postfix) with ESMTP id 09A59246A6 for ; Thu, 16 Jul 2009 12:37:08 +0200 (CEST) In-Reply-To: <4A5F016F.1030305@freenet.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org, tiwai@suse.de List-Id: alsa-devel@alsa-project.org Oh sorry ... I mean ... SIDE and SURROUND (==REAR) are swapped! Frashman schrieb: > > > Takashi Iwai schrieb: >> At Wed, 15 Jul 2009 12:55:23 +0200, >> Frashman wrote: >> >>> Hi Takashi, >>> >>> first of all, thank you for developing this driver. >>> I tested it today. It works, so far. >>> >>> But two annoying things. As you mentioned, I got problems, if the >>> onboard sound modules are loaded. Then i get no sound out auf my xfi. >>> >> >> It's likely the collision of PCI device ID. >> Some X-Fi models support both HD-audio and emu20kx-native modes. The >> modes are switched by some magical sequence. >> >> Anyway, please run alsa-info.sh with --no-upload option, and attach >> the generated file. >> > I let the kernel auto probe all sound modules and generated then the > alsa-info.txt > It's attached. >> >>> If I disable the loading of snd-hda-intel modules while booting, >>> then it works. >>> >>> The second problem is, that SIDE and SURROUND connectors are >>> interchanged. I'm absolutly sure, it works fine under windows and >>> the connector colors are also correct. >>> >>> If I run speaker-test -c8 the SIDE Speakers sounds come out of my >>> REAR (SURROUND) Speakers, while nothing is coming out of my rear >>> speakers, if i'm using speaker-test -c6 >>> >> >> So, the side channels (channel 7 & 8) and the rear channels (3 & 4) >> are swapped when running with 8 channel mode? >> > The REAR and SURROUND channels are swapped in 4, 6 and 8channel mode > ... so they always swapped. (speaker-test) > AND because there are swapped in 6channel mode too .... there is > nothing coming out of the rear channels, if I connect everything > right. I double checked it with windows and with cable colors. > > > Sincerely, > Frashman >> Takashi >> _______________________________________________ >> Alsa-devel mailing list >> Alsa-devel@alsa-project.org >> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel >> > ------------------------------------------------------------------------ > > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@alsa-project.org > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel