From: Mark Jackson <mpfj-list@mimc.co.uk>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] Add AVR32 LCD support
Date: Tue, 21 Jul 2009 11:11:37 +0100 [thread overview]
Message-ID: <4A659459.80207@mimc.co.uk> (raw)
This patch adds support for the AVR32 LCD controller. This patch is
based off the latest u-boot-video.
A quick summary of what's going on:-
Enable LCDC pixel clock
Enable LCDC port pins
Add framebuffer pointer to global_data struct
Allocate framebuffer
To use the new code, update your board config to include something like
this:-
#define CONFIG_LCD 1
#if defined(CONFIG_LCD)
#define CONFIG_CMD_BMP
#define CONFIG_ATMEL_LCD 1
#define LCD_BPP LCD_COLOR16
#define CONFIG_BMP_16BPP 1
#define CONFIG_FB_ADDR 0x10600000
#define CONFIG_WHITE_ON_BLACK 1
#define CONFIG_VIDEO_BMP_GZIP 1
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE 262144
#define CONFIG_ATMEL_LCD_BGR555 1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
#define CONFIG_SPLASH_SCREEN 1
#endif
The standard U-Boot BMP and Splash-screen features should just work.
Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
---
cpu/at32ap/at32ap700x/clk.c | 5 +
cpu/at32ap/at32ap700x/portmux.c | 90 +++++++++++++++++++++
include/asm-avr32/arch-at32ap700x/chip-features.h | 5 +
include/asm-avr32/arch-at32ap700x/clk.h | 6 ++
include/asm-avr32/arch-at32ap700x/portmux.h | 5 +-
include/asm-avr32/global_data.h | 3 +
lib_avr32/board.c | 11 +++
7 files changed, 124 insertions(+), 1 deletions(-)
diff --git a/cpu/at32ap/at32ap700x/clk.c b/cpu/at32ap/at32ap700x/clk.c
index 2c2e19c..742bc6b 100644
--- a/cpu/at32ap/at32ap700x/clk.c
+++ b/cpu/at32ap/at32ap700x/clk.c
@@ -65,6 +65,11 @@ void clk_init(void)
#ifdef CONFIG_PLL
/* Use PLL0 as main clock */
sm_writel(PM_MCCTRL, SM_BIT(PLLSEL));
+
+#ifdef CONFIG_LCD
+ /* Set up pixel clock for the LCDC */
+ sm_writel(PM_GCCTRL(7), SM_BIT(PLLSEL) | SM_BIT(CEN));
+#endif
#endif
}
diff --git a/cpu/at32ap/at32ap700x/portmux.c b/cpu/at32ap/at32ap700x/portmux.c
index 2a3b004..e71b2bf 100644
--- a/cpu/at32ap/at32ap700x/portmux.c
+++ b/cpu/at32ap/at32ap700x/portmux.c
@@ -202,3 +202,93 @@ void portmux_enable_spi1(unsigned long cs_mask, unsigned long drive_strength)
PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
}
#endif
+
+#ifdef AT32AP700x_CHIP_HAS_LCDC
+void portmux_enable_lcdc(int pin_config)
+{
+ unsigned long portc_mask = 0;
+ unsigned long portd_mask = 0;
+ unsigned long porte_mask = 0;
+
+ switch(pin_config) {
+ case 0:
+ portc_mask = (1 << 19) /* CC */
+ | (1 << 20) /* HSYNC */
+ | (1 << 21) /* PCLK */
+ | (1 << 22) /* VSYNC */
+ | (1 << 23) /* DVAL */
+ | (1 << 24) /* MODE */
+ | (1 << 25) /* PWR */
+ | (1 << 26) /* DATA0 */
+ | (1 << 27) /* DATA1 */
+ | (1 << 28) /* DATA2 */
+ | (1 << 29) /* DATA3 */
+ | (1 << 30) /* DATA4 */
+ | (1 << 31); /* DATA5 */
+
+ portd_mask = (1 << 0) /* DATA6 */
+ | (1 << 1) /* DATA7 */
+ | (1 << 2) /* DATA8 */
+ | (1 << 3) /* DATA9 */
+ | (1 << 4) /* DATA10 */
+ | (1 << 5) /* DATA11 */
+ | (1 << 6) /* DATA12 */
+ | (1 << 7) /* DATA13 */
+ | (1 << 8) /* DATA14 */
+ | (1 << 9) /* DATA15 */
+ | (1 << 10) /* DATA16 */
+ | (1 << 11) /* DATA17 */
+ | (1 << 12) /* DATA18 */
+ | (1 << 13) /* DATA19 */
+ | (1 << 14) /* DATA20 */
+ | (1 << 15) /* DATA21 */
+ | (1 << 16) /* DATA22 */
+ | (1 << 17); /* DATA23 */
+ break;
+
+ case 1:
+ portc_mask = (1 << 20) /* HSYNC */
+ | (1 << 21) /* PCLK */
+ | (1 << 22) /* VSYNC */
+ | (1 << 25) /* PWR */
+ | (1 << 31); /* DATA5 */
+
+ portd_mask = (1 << 0) /* DATA6 */
+ | (1 << 1) /* DATA7 */
+ | (1 << 7) /* DATA13 */
+ | (1 << 8) /* DATA14 */
+ | (1 << 9) /* DATA15 */
+ | (1 << 16) /* DATA22 */
+ | (1 << 17); /* DATA23 */
+
+ porte_mask = (1 << 0) /* CC */
+ | (1 << 1) /* DVAL */
+ | (1 << 2) /* MODE */
+ | (1 << 3) /* DATA0 */
+ | (1 << 4) /* DATA1 */
+ | (1 << 5) /* DATA2 */
+ | (1 << 6) /* DATA3 */
+ | (1 << 7) /* DATA4 */
+ | (1 << 8) /* DATA8 */
+ | (1 << 9) /* DATA9 */
+ | (1 << 10) /* DATA10 */
+ | (1 << 11) /* DATA11 */
+ | (1 << 12) /* DATA12 */
+ | (1 << 13) /* DATA16 */
+ | (1 << 14) /* DATA17 */
+ | (1 << 15) /* DATA18 */
+ | (1 << 16) /* DATA19 */
+ | (1 << 17) /* DATA20 */
+ | (1 << 18); /* DATA21 */
+ break;
+ }
+
+ /* REVISIT: Some pins are probably pure outputs */
+ portmux_select_peripheral(PORTMUX_PORT_C, portc_mask,
+ PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
+ portmux_select_peripheral(PORTMUX_PORT_D, portd_mask,
+ PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
+ portmux_select_peripheral(PORTMUX_PORT_E, porte_mask,
+ PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
+}
+#endif
diff --git a/include/asm-avr32/arch-at32ap700x/chip-features.h b/include/asm-avr32/arch-at32ap700x/chip-features.h
index c47107e..40a2476 100644
--- a/include/asm-avr32/arch-at32ap700x/chip-features.h
+++ b/include/asm-avr32/arch-at32ap700x/chip-features.h
@@ -32,4 +32,9 @@
#define AT32AP700x_CHIP_HAS_MACB
#endif
+/* AP7000 and AP7002 have LCD controller, but AP7001 does not */
+#if defined(CONFIG_AT32AP7000) || defined(CONFIG_AT32AP7002)
+#define AT32AP700x_CHIP_HAS_LCDC
+#endif
+
#endif /* __ASM_AVR32_ARCH_CHIP_FEATURES_H__ */
diff --git a/include/asm-avr32/arch-at32ap700x/clk.h b/include/asm-avr32/arch-at32ap700x/clk.h
index d83e93b..7a0b655 100644
--- a/include/asm-avr32/arch-at32ap700x/clk.h
+++ b/include/asm-avr32/arch-at32ap700x/clk.h
@@ -83,6 +83,12 @@ static inline unsigned long get_spi_clk_rate(unsigned int dev_id)
return get_pba_clk_rate();
}
#endif
+#ifdef AT32AP700x_CHIP_HAS_LCDC
+static inline unsigned long get_lcdc_clk_rate(unsigned int dev_id)
+{
+ return get_hsb_clk_rate();
+}
+#endif
extern void clk_init(void);
diff --git a/include/asm-avr32/arch-at32ap700x/portmux.h b/include/asm-avr32/arch-at32ap700x/portmux.h
index 96fe70d..8574aec 100644
--- a/include/asm-avr32/arch-at32ap700x/portmux.h
+++ b/include/asm-avr32/arch-at32ap700x/portmux.h
@@ -85,5 +85,8 @@ void portmux_enable_mmci(unsigned int slot, unsigned long flags,
void portmux_enable_spi0(unsigned long cs_mask, unsigned long drive_strength);
void portmux_enable_spi1(unsigned long cs_mask, unsigned long drive_strength);
#endif
-
+#ifdef AT32AP700x_CHIP_HAS_LCDC
+void portmux_enable_lcdc(int pin_config);
+#endif
+
#endif /* __ASM_AVR32_ARCH_PORTMUX_H__ */
diff --git a/include/asm-avr32/global_data.h b/include/asm-avr32/global_data.h
index 97a6c61..efbdda9 100644
--- a/include/asm-avr32/global_data.h
+++ b/include/asm-avr32/global_data.h
@@ -42,6 +42,9 @@ typedef struct global_data {
unsigned long env_addr; /* Address of env struct */
unsigned long env_valid; /* Checksum of env valid? */
unsigned long cpu_hz; /* cpu core clock frequency */
+#if defined(CONFIG_LCD)
+ void *fb_base; /* framebuffer address */
+#endif
void **jt; /* jump table */
} gd_t;
diff --git a/lib_avr32/board.c b/lib_avr32/board.c
index 5b2d0ef..cb1473d 100644
--- a/lib_avr32/board.c
+++ b/lib_avr32/board.c
@@ -239,6 +239,17 @@ void board_init_f(ulong board_type)
addr -= CONFIG_SYS_DMA_ALLOC_LEN;
#endif
+#ifdef CONFIG_LCD
+#ifdef CONFIG_FB_ADDR
+ printf("LCD: Frame buffer allocated@preset 0x%08x\n", CONFIG_FB_ADDR);
+ gd->fb_base = (void*)CONFIG_FB_ADDR;
+#else
+ addr = lcd_setmem(addr);
+ printf("LCD: Frame buffer allocated at 0x%08lx\n", addr);
+ gd->fb_base = (void*)addr;
+#endif /* CONFIG_FB_ADDR */
+#endif /* CONFIG_LCD */
+
/* Allocate a Board Info struct on a word boundary */
addr -= sizeof(bd_t);
addr &= ~3UL;
next reply other threads:[~2009-07-21 10:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-21 10:11 Mark Jackson [this message]
2009-07-26 11:34 ` [U-Boot] [PATCH v2] Add AVR32 LCD support Anatolij Gustschin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A659459.80207@mimc.co.uk \
--to=mpfj-list@mimc.co.uk \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.