From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dmitri Seletski Date: Sat, 25 Jul 2009 01:49:49 +0100 Subject: [ath9k-devel] N mode In-Reply-To: <20090616003715.GA5492@tesla> References: <4A2E8611.6010401@gmail.com> <20090609214205.GD12776@tesla> <4A2EDB3B.9020503@gmail.com> <20090609220733.GF12776@tesla> <4A2EDF1E.4000707@gmail.com> <4A3445CC.7010607@gmail.com> <20090615160144.GB19674@tesla> <20090615174758.GA22922@tesla> <4A36AEF8.5030703@gmail.com> <4A36CFF9.6070506@gmail.com> <20090616003715.GA5492@tesla> Message-ID: <4A6A56AD.2090104@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Luis R. Rodriguez wrote: > On Mon, Jun 15, 2009 at 03:49:29PM -0700, Dmitri Seletski wrote: > >> Dmitri Seletski wrote: >> >>> Luis R. Rodriguez wrote: >>> >>> >>>> On Mon, Jun 15, 2009 at 09:01:44AM -0700, Luis Rodriguez wrote: >>>> >>>> >>>> >>>>> On Sat, Jun 13, 2009 at 05:35:24PM -0700, Dmitri Seletski wrote: >>>>> >>>>> >>>>> >>>>>> Dmitri Seletski wrote: >>>>>> >>>>>> >>>>>> >>>>>>> Luis R. Rodriguez wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> On Tue, Jun 09, 2009 at 02:59:23PM -0700, Dmitri Seletski wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> Luis R. Rodriguez wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> On Tue, Jun 09, 2009 at 08:56:01AM -0700, Dmitri Seletski wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> Dmitri Seletski wrote: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> Luis R. Rodriguez wrote: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> On Mon, May 18, 2009 at 4:59 PM, Luis R. Rodriguez >>>>>>>>>>>>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> On Mon, May 18, 2009 at 04:34:49PM -0700, Dmitri Seletski wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Luis R. Rodriguez wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> compat-wireless-2009-05-19 # grep CONFIG_MAC80211_DEFAULT_PS config.mk >>>>>>>>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS=n >>>>>>>>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS_VALUE=1 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> make :) >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> make unload >>>>>>>>>>>>>>>>> make install >>>>>>>>>>>>>>>>> modprobe ath9k >>>>>>>>>>>>>>>>> ip link set wlan0 up >>>>>>>>>>>>>>>>> iwconfig wlan0 essid dlink >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> last (IMHO)relevan't dmesg messages(got loads of dmesg history today) >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81: >>>>>>>>>>>>>>>>> mem=0xffffc200114e0000, irq=19 >>>>>>>>>>>>>>>>> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link is not ready >>>>>>>>>>>>>>>>> [14216.110829] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1 >>>>>>>>>>>>>>>>> [14216.310267] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2 >>>>>>>>>>>>>>>>> [14216.316846] wlan0 direct probe responded >>>>>>>>>>>>>>>>> [14216.316848] wlan0: authenticate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>>>>>>> [14216.320962] wlan0: authenticated >>>>>>>>>>>>>>>>> [14216.320964] wlan0: associate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>>>>>>> [14216.520277] wlan0: associate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>>>>>>> [14216.527099] wlan0: deauthenticated (Reason: 9) >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I believe reason 9 is you're AP tells you that you are trying to >>>>>>>>>>>>>>>> associate to it without first having authenticated. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> [14217.527273] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3 >>>>>>>>>>>>>>>>> [14217.727264] wlan0: direct probe to AP 00:1e:58:b4:f6:83 timed out >>>>>>>>>>>>>>>>> [14231.356054] wlan0: authenticate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>>>>>>> [14231.359188] wlan0: authenticated >>>>>>>>>>>>>>>>> [14231.359191] wlan0: associate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>>>>>>> [14231.367102] wlan0: deauthenticated (Reason: 9) >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> And we repeat this here. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> [14232.367277] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1 >>>>>>>>>>>>>>>>> [14232.567284] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 2 >>>>>>>>>>>>>>>>> [14232.570837] wlan0 direct probe responded >>>>>>>>>>>>>>>>> [14232.570843] wlan0: authenticate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>>>>>>> [14232.573250] wlan0: authenticated >>>>>>>>>>>>>>>>> [14232.573434] wlan0: associate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>>>>>>> [14232.773283] wlan0: associate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>>>>>>> [14232.780130] wlan0: deauthenticated (Reason: 9) >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> And here. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> [14233.780276] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 3 >>>>>>>>>>>>>>>>> [14233.784639] wlan0 direct probe responded >>>>>>>>>>>>>>>>> [14233.784645] wlan0: authenticate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>>>>>>> [14233.799082] wlan0: authenticated >>>>>>>>>>>>>>>>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Access point in N mode only currently. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hm OK. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Switching to mixture of N, G, B and dmesg throws this: >>>>>>>>>>>>>>>>> [14233.799087] wlan0: association with AP 00:1e:58:b4:f6:83 timed out >>>>>>>>>>>>>>>>> [14435.358964] wlan0: authenticate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>>>>>>> [14435.362920] wlan0: authenticated >>>>>>>>>>>>>>>>> [14435.362922] wlan0: associate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>>>>>>> [14435.371750] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421 >>>>>>>>>>>>>>>>> status=0 aid=1) >>>>>>>>>>>>>>>>> [14435.371752] wlan0: associated >>>>>>>>>>>>>>>>> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready >>>>>>>>>>>>>>>>> [14435.839637] wlan0: disassociated (Reason: 8) >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> This is the STA has left. Hm, lets try upgrading your supplicant... >>>>>>>>>>>>>>>> Can you try upgrading to the latest from git? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> git://w1.fi/srv/git/hostap.git >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Luis >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hello Luis. >>>>>>>>>>>>>>> I have no idea what authentication you are talking about. >>>>>>>>>>>>>>> I am sure that i dont use any authentication. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> I'm talking about the 802.11 authentication which is always >>>>>>>>>>>>>> required prior to association (even when no encryption is enabled). >>>>>>>>>>>>>> >>>>>>>>>>>>>> Can you try a newer wpa_supplicant to see if that helps? >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> That is, use a plaintext supplicant as follows: >>>>>>>>>>>>> >>>>>>>>>>>>> mcgrof at tesla ~ $ cat plaintext.conf >>>>>>>>>>>>> ctrl_interface=/var/run/wpa_supplicant >>>>>>>>>>>>> ap_scan=1 >>>>>>>>>>>>> network={ >>>>>>>>>>>>> key_mgmt=NONE >>>>>>>>>>>>> ssid="your-ssid" >>>>>>>>>>>>> scan_ssid=1 >>>>>>>>>>>>> } >>>>>>>>>>>>> >>>>>>>>>>>>> wpa_supplicant -i wlan0 -c plaintext.conf >>>>>>>>>>>>> >>>>>>>>>>>>> Luis >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> Hello Luis. >>>>>>>>>>>> >>>>>>>>>>>> ou man, you scared shi* out of me :) >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> dimko wpa_supplicant # modprobe -r ath9k >>>>>>>>>>>> dimko wpa_supplicant # modprobe ath9k debug=0x00000200 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> [19251.514273] wlan0: deauthenticating by local choice (reason=3) >>>>>>>>>>>> [19251.808278] ath9k 0000:01:07.0: PCI INT A disabled >>>>>>>>>>>> [19251.808327] ath9k: Driver unloaded >>>>>>>>>>>> [19288.173497] cfg80211: Calling CRDA to update world regulatory domain >>>>>>>>>>>> [19288.277348] ath9k 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 19 >>>>>>>>>>>> (level, low) -> IRQ 19 >>>>>>>>>>>> [19288.703537] ath9k: Eeprom VER: 14, REV: 2 >>>>>>>>>>>> [19288.704291] ath: Country alpha2 being used: AM >>>>>>>>>>>> [19288.704292] ath: Regpair detected: 0x30 >>>>>>>>>>>> [19288.704294] ath9k: Rate: 1Mbps, ratecode: 27 >>>>>>>>>>>> [19288.704295] ath9k: Rate: 2Mbps, ratecode: 26 >>>>>>>>>>>> [19288.704297] ath9k: Rate: 5Mbps, ratecode: 25 >>>>>>>>>>>> [19288.704298] ath9k: Rate: 11Mbps, ratecode: 24 >>>>>>>>>>>> [19288.704299] ath9k: Rate: 6Mbps, ratecode: 11 >>>>>>>>>>>> [19288.704300] ath9k: Rate: 9Mbps, ratecode: 15 >>>>>>>>>>>> [19288.704302] ath9k: Rate: 12Mbps, ratecode: 10 >>>>>>>>>>>> [19288.704303] ath9k: Rate: 18Mbps, ratecode: 14 >>>>>>>>>>>> [19288.704304] ath9k: Rate: 24Mbps, ratecode: 9 >>>>>>>>>>>> [19288.704305] ath9k: Rate: 36Mbps, ratecode: 13 >>>>>>>>>>>> [19288.704306] ath9k: Rate: 48Mbps, ratecode: 8 >>>>>>>>>>>> [19288.704307] ath9k: Rate: 54Mbps, ratecode: 12 >>>>>>>>>>>> [19288.704309] ath9k: Rate: 6Mbps, ratecode: 11 >>>>>>>>>>>> [19288.704310] ath9k: Rate: 9Mbps, ratecode: 15 >>>>>>>>>>>> [19288.704311] ath9k: Rate: 12Mbps, ratecode: 10 >>>>>>>>>>>> [19288.704312] ath9k: Rate: 18Mbps, ratecode: 14 >>>>>>>>>>>> [19288.704313] ath9k: Rate: 24Mbps, ratecode: 9 >>>>>>>>>>>> [19288.704315] ath9k: Rate: 36Mbps, ratecode: 13 >>>>>>>>>>>> [19288.704316] ath9k: Rate: 48Mbps, ratecode: 8 >>>>>>>>>>>> [19288.704317] ath9k: Rate: 54Mbps, ratecode: 12 >>>>>>>>>>>> [19288.704339] ath9k: tx DMA: 512 buffers 1 desc/buf >>>>>>>>>>>> [19288.704379] ath9k: tx DMA map: ffff88009f400000 (77824) -> 0 (77824) >>>>>>>>>>>> [19288.704406] ath9k: beacon DMA: 4 buffers 1 desc/buf >>>>>>>>>>>> [19288.704408] ath9k: beacon DMA map: ffff88009f577000 (608) -> 0 (608) >>>>>>>>>>>> [19288.704410] ath9k: cachelsz 64 rxbufsize 3904 >>>>>>>>>>>> [19288.704412] ath9k: rx DMA: 512 buffers 1 desc/buf >>>>>>>>>>>> [19288.704455] ath9k: rx DMA map: ffff8800ac560000 (77824) -> 0 (77824) >>>>>>>>>>>> [19288.707111] phy0: Selected rate control algorithm 'ath9k_rate_control' >>>>>>>>>>>> [19288.707656] cfg80211: Calling CRDA for country: AM >>>>>>>>>>>> [19288.707680] Registered led device: ath9k-phy0::radio >>>>>>>>>>>> [19288.707689] Registered led device: ath9k-phy0::assoc >>>>>>>>>>>> [19288.707699] Registered led device: ath9k-phy0::tx >>>>>>>>>>>> [19288.707711] Registered led device: ath9k-phy0::rx >>>>>>>>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81: >>>>>>>>>>>> mem=0xffffc200114e0000, irq=19 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> ip link set wlan0 up >>>>>>>>>>>> >>>>>>>>>>>> [19365.389282] ath9k: Starting driver with initial channel: 2412 MHz >>>>>>>>>>>> [19365.393590] ath9k: Attach a VIF of type: 2 >>>>>>>>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0 >>>>>>>>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0 >>>>>>>>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0 >>>>>>>>>>>> [19365.404378] ath9k: Set channel: 2412 MHz >>>>>>>>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0 >>>>>>>>>>>> [19365.408413] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min: >>>>>>>>>>>> 7, cw_max: 15, txop: 102 >>>>>>>>>>>> [19365.408430] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min: >>>>>>>>>>>> 15, cw_max: 31, txop: 188 >>>>>>>>>>>> [19365.408446] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min: >>>>>>>>>>>> 1023, cw_max: 31, txop: 0 >>>>>>>>>>>> [19365.408460] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min: >>>>>>>>>>>> 1023, cw_max: 31, txop: 0 >>>>>>>>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0 >>>>>>>>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0 >>>>>>>>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready >>>>>>>>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0 >>>>>>>>>>>> >>>>>>>>>>>> iwconfig wlan0 essid dlink >>>>>>>>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81: >>>>>>>>>>>> mem=0xffffc200114e0000, irq=19 >>>>>>>>>>>> [19365.389282] ath9k: Starting driver with initial channel: 2412 MHz >>>>>>>>>>>> [19365.393590] ath9k: Attach a VIF of type: 2 >>>>>>>>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0 >>>>>>>>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0 >>>>>>>>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0 >>>>>>>>>>>> [19365.404378] ath9k: Set channel: 2412 MHz >>>>>>>>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0 >>>>>>>>>>>> [19365.408413] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min: >>>>>>>>>>>> 7, cw_max: 15, txop: 102 >>>>>>>>>>>> [19365.408430] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min: >>>>>>>>>>>> 15, cw_max: 31, txop: 188 >>>>>>>>>>>> [19365.408446] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min: >>>>>>>>>>>> 1023, cw_max: 31, txop: 0 >>>>>>>>>>>> [19365.408460] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min: >>>>>>>>>>>> 1023, cw_max: 31, txop: 0 >>>>>>>>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0 >>>>>>>>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0 >>>>>>>>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is not ready >>>>>>>>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0 >>>>>>>>>>>> [19457.759393] ath9k: Set HW RX filter: 0x10 >>>>>>>>>>>> [19457.789264] ath9k: Set channel: 2412 MHz >>>>>>>>>>>> [19457.789270] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19457.789373] ath9k: (2412 MHz) -> (2412 MHz), chanwidth: 0 >>>>>>>>>>>> [19457.853264] ath9k: Set channel: 2417 MHz >>>>>>>>>>>> [19457.853269] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19457.853363] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0 >>>>>>>>>>>> [19457.914263] ath9k: Set channel: 2422 MHz >>>>>>>>>>>> [19457.914268] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19457.918980] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0 >>>>>>>>>>>> [19457.980263] ath9k: Set channel: 2427 MHz >>>>>>>>>>>> [19457.980268] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19457.980363] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0 >>>>>>>>>>>> [19458.041263] ath9k: Set channel: 2432 MHz >>>>>>>>>>>> [19458.041268] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19458.041363] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0 >>>>>>>>>>>> [19458.102264] ath9k: Set channel: 2437 MHz >>>>>>>>>>>> [19458.102271] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19458.102368] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0 >>>>>>>>>>>> [19458.163262] ath9k: Set channel: 2442 MHz >>>>>>>>>>>> [19458.163267] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19458.163360] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0 >>>>>>>>>>>> [19458.235263] ath9k: Set channel: 2447 MHz >>>>>>>>>>>> [19458.235269] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19458.235450] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0 >>>>>>>>>>>> [19458.296257] ath9k: Set channel: 2452 MHz >>>>>>>>>>>> [19458.296258] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19458.296344] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0 >>>>>>>>>>>> [19458.357257] ath9k: Set channel: 2457 MHz >>>>>>>>>>>> [19458.357258] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19458.357344] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0 >>>>>>>>>>>> [19458.418257] ath9k: Set channel: 2462 MHz >>>>>>>>>>>> [19458.418258] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19458.418344] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0 >>>>>>>>>>>> [19458.479263] ath9k: Set channel: 2467 MHz >>>>>>>>>>>> [19458.479267] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19458.479362] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0 >>>>>>>>>>>> [19458.680270] ath9k: Set channel: 2472 MHz >>>>>>>>>>>> [19458.680280] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19458.680381] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0 >>>>>>>>>>>> [19458.881265] ath9k: Set channel: 2484 MHz >>>>>>>>>>>> [19458.881270] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19458.881367] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0 >>>>>>>>>>>> [19459.082271] ath9k: Set channel: 2412 MHz >>>>>>>>>>>> [19459.082278] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19459.082452] ath9k: (2484 MHz) -> (2412 MHz), chanwidth: 0 >>>>>>>>>>>> [19459.084497] ath9k: Set HW RX filter: 0x0 >>>>>>>>>>>> [19459.085175] ath9k: Set channel: 2462 MHz >>>>>>>>>>>> [19459.091031] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19459.091252] ath9k: (2412 MHz) -> (2462 MHz), chanwidth: 0 >>>>>>>>>>>> [19459.095097] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min: >>>>>>>>>>>> 3, cw_max: 7, txop: 47 >>>>>>>>>>>> [19459.095114] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min: >>>>>>>>>>>> 7, cw_max: 15, txop: 94 >>>>>>>>>>>> [19459.095125] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min: >>>>>>>>>>>> 1023, cw_max: 15, txop: 0 >>>>>>>>>>>> [19459.095136] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min: >>>>>>>>>>>> 1023, cw_max: 15, txop: 0 >>>>>>>>>>>> [19459.095272] wlan0: authenticate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>> [19459.099880] wlan0: authenticated >>>>>>>>>>>> [19459.099885] wlan0: associate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>> [19459.299265] wlan0: associate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>> [19459.306086] wlan0: deauthenticated (Reason: 9) >>>>>>>>>>>> [19460.306269] wlan0: direct probe to AP 00:1e:58:b4:f6:83 try 1 >>>>>>>>>>>> [19460.316796] wlan0 direct probe responded >>>>>>>>>>>> [19460.316801] wlan0: authenticate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>> [19460.319702] wlan0: authenticated >>>>>>>>>>>> [19460.319707] wlan0: associate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>> [19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83 timed out >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> this is while ap is in N mode. >>>>>>>>>>>> >>>>>>>>>>>> This is after i set it mixed NBG: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> [19460.519264] wlan0: association with AP 00:1e:58:b4:f6:83 timed out >>>>>>>>>>>> [19601.885667] ath9k: Set HW RX filter: 0x10 >>>>>>>>>>>> [19601.917026] ath9k: Set channel: 2412 MHz >>>>>>>>>>>> [19601.917034] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19601.917192] ath9k: (2462 MHz) -> (2412 MHz), chanwidth: 0 >>>>>>>>>>>> [19601.978014] ath9k: Set channel: 2417 MHz >>>>>>>>>>>> [19601.978019] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19601.978114] ath9k: (2412 MHz) -> (2417 MHz), chanwidth: 0 >>>>>>>>>>>> [19602.039014] ath9k: Set channel: 2422 MHz >>>>>>>>>>>> [19602.039018] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19602.043759] ath9k: (2417 MHz) -> (2422 MHz), chanwidth: 0 >>>>>>>>>>>> [19602.104014] ath9k: Set channel: 2427 MHz >>>>>>>>>>>> [19602.104019] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19602.108744] ath9k: (2422 MHz) -> (2427 MHz), chanwidth: 0 >>>>>>>>>>>> [19602.169030] ath9k: Set channel: 2432 MHz >>>>>>>>>>>> [19602.169040] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19602.169144] ath9k: (2427 MHz) -> (2432 MHz), chanwidth: 0 >>>>>>>>>>>> [19602.230009] ath9k: Set channel: 2437 MHz >>>>>>>>>>>> [19602.230012] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19602.230100] ath9k: (2432 MHz) -> (2437 MHz), chanwidth: 0 >>>>>>>>>>>> [19602.291015] ath9k: Set channel: 2442 MHz >>>>>>>>>>>> [19602.291019] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19602.291110] ath9k: (2437 MHz) -> (2442 MHz), chanwidth: 0 >>>>>>>>>>>> [19602.352012] ath9k: Set channel: 2447 MHz >>>>>>>>>>>> [19602.352016] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19602.352107] ath9k: (2442 MHz) -> (2447 MHz), chanwidth: 0 >>>>>>>>>>>> [19602.413008] ath9k: Set channel: 2452 MHz >>>>>>>>>>>> [19602.413010] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19602.413097] ath9k: (2447 MHz) -> (2452 MHz), chanwidth: 0 >>>>>>>>>>>> [19602.474007] ath9k: Set channel: 2457 MHz >>>>>>>>>>>> [19602.474009] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19602.474519] ath9k: (2452 MHz) -> (2457 MHz), chanwidth: 0 >>>>>>>>>>>> [19602.535014] ath9k: Set channel: 2462 MHz >>>>>>>>>>>> [19602.535019] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19602.535115] ath9k: (2457 MHz) -> (2462 MHz), chanwidth: 0 >>>>>>>>>>>> [19602.596014] ath9k: Set channel: 2467 MHz >>>>>>>>>>>> [19602.596019] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19602.596115] ath9k: (2462 MHz) -> (2467 MHz), chanwidth: 0 >>>>>>>>>>>> [19602.797021] ath9k: Set channel: 2472 MHz >>>>>>>>>>>> [19602.797032] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19602.797136] ath9k: (2467 MHz) -> (2472 MHz), chanwidth: 0 >>>>>>>>>>>> [19602.998018] ath9k: Set channel: 2484 MHz >>>>>>>>>>>> [19602.998025] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19602.998124] ath9k: (2472 MHz) -> (2484 MHz), chanwidth: 0 >>>>>>>>>>>> [19603.199023] ath9k: Set channel: 2462 MHz >>>>>>>>>>>> [19603.199031] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19603.199198] ath9k: (2484 MHz) -> (2462 MHz), chanwidth: 0 >>>>>>>>>>>> [19603.200703] ath9k: Set HW RX filter: 0x0 >>>>>>>>>>>> [19603.200723] ath9k: Set channel: 2462 MHz >>>>>>>>>>>> [19603.200728] ath9k: tx chmask: 1, rx chmask: 1 >>>>>>>>>>>> [19603.200893] ath9k: (2462 MHz) -> (2462 MHz), chanwidth: 0 >>>>>>>>>>>> [19603.205188] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min: >>>>>>>>>>>> 3, cw_max: 7, txop: 47 >>>>>>>>>>>> [19603.205203] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min: >>>>>>>>>>>> 7, cw_max: 15, txop: 94 >>>>>>>>>>>> [19603.205213] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min: >>>>>>>>>>>> 1023, cw_max: 15, txop: 0 >>>>>>>>>>>> [19603.205224] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min: >>>>>>>>>>>> 1023, cw_max: 15, txop: 0 >>>>>>>>>>>> [19603.205364] wlan0: authenticate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>> [19603.208182] wlan0: authenticated >>>>>>>>>>>> [19603.208189] wlan0: associate with AP 00:1e:58:b4:f6:83 >>>>>>>>>>>> [19603.216915] wlan0: RX AssocResp from 00:1e:58:b4:f6:83 (capab=0x421 >>>>>>>>>>>> status=0 aid=1) >>>>>>>>>>>> [19603.216920] wlan0: associated >>>>>>>>>>>> [19603.216952] ath9k: Choosing rate table for mode: 10 >>>>>>>>>>>> [19603.217411] ath9k: RC Initialized with capabilities: 0x0 >>>>>>>>>>>> [19603.217420] ath9k: Configure tx [queue/halq] [0/3], aifs: 2, cw_min: >>>>>>>>>>>> 3, cw_max: 7, txop: 47 >>>>>>>>>>>> [19603.217437] ath9k: Configure tx [queue/halq] [1/2], aifs: 2, cw_min: >>>>>>>>>>>> 7, cw_max: 15, txop: 94 >>>>>>>>>>>> [19603.217451] ath9k: Configure tx [queue/halq] [2/1], aifs: 3, cw_min: >>>>>>>>>>>> 1023, cw_max: 15, txop: 0 >>>>>>>>>>>> [19603.217466] ath9k: Configure tx [queue/halq] [3/0], aifs: 7, cw_min: >>>>>>>>>>>> 1023, cw_max: 15, txop: 0 >>>>>>>>>>>> [19603.217536] ath9k: RX filter 0x0 bssid 00:1e:58:b4:f6:83 aid 0x0 >>>>>>>>>>>> [19603.217541] ath9k: BSS Changed PREAMBLE 1 >>>>>>>>>>>> [19603.217546] ath9k: BSS Changed ASSOC 1 >>>>>>>>>>>> [19603.217550] ath9k: Bss Info ASSOC 1, bssid: 00:1e:58:b4:f6:83 >>>>>>>>>>>> [19603.218918] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready >>>>>>>>>>>> [19603.218977] ath9k: Set HW RX filter: 0x0 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> I am off to bed, i live in GMT0(+1) time zone >>>>>>>>>>>> Hopefully see ya tomorrow. >>>>>>>>>>>> Is there an IRC channel or anything? this is just slow. >>>>>>>>>>>> Regards >>>>>>>>>>>> Dmitri >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> Hello Luis. >>>>>>>>>>> >>>>>>>>>>> I don't mean to rush you, was only wandering, what is story with report >>>>>>>>>>> i have submitted, any progress on it yet? >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> So I am working on other items and was hoping someone else could tackle this >>>>>>>>>> but it seems everyone has been busy with other items as well. I'll try to help >>>>>>>>>> you with this but I'm as in the dark with this issue as you are right now. We'll >>>>>>>>>> need to debug futher. >>>>>>>>>> >>>>>>>>>> Did you see the other thread about a similar issue? It seemed the person was >>>>>>>>>> running Network Manager (and that spawns it own wpa_supplicant). >>>>>>>>>> >>>>>>>>>> Just to confirm -- are you certain you don't have any instance of nm-applet, >>>>>>>>>> NetworkManager or a wpa_supplicant running in the background? >>>>>>>>>> >>>>>>>>>> Luis >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> Hello Luis. >>>>>>>>> >>>>>>>>> I have no idea what is nm-applet. I am as close to bare bones as >>>>>>>>> possible. I am using gentoo distribution, it by design is not using any >>>>>>>>> graphical interfaces. to set up network, you have to set it up initially >>>>>>>>> manually(using available comands or text editor), it doesn't even have >>>>>>>>> DHCP client by default! >>>>>>>>> typically if what you have mentioned is part of start up scripts - i >>>>>>>>> would know about it.(since most of them if not installed by default - >>>>>>>>> are not starting up by default) >>>>>>>>> >>>>>>>>> emerge -s nm-applet >>>>>>>>> Searching... >>>>>>>>> [ Results for search key : nm-applet ] >>>>>>>>> [ Applications found : 1 ] >>>>>>>>> >>>>>>>>> * gnome-extra/nm-applet >>>>>>>>> Latest version available: 0.6.6 >>>>>>>>> Latest version installed: [ Not Installed ] >>>>>>>>> >>>>>>>>> I am not sure what is "wpa_supplicant", since from what i understand >>>>>>>>> it's not user land executable. >>>>>>>>> >>>>>>>>> rc-status >>>>>>>>> Runlevel: default >>>>>>>>> acpid >>>>>>>>> [ started ] >>>>>>>>> alsasound >>>>>>>>> [ started ] >>>>>>>>> clamd >>>>>>>>> [ started ] >>>>>>>>> hald >>>>>>>>> [ started ] >>>>>>>>> hdparm >>>>>>>>> [ started ] >>>>>>>>> lm_sensors >>>>>>>>> [ started ] >>>>>>>>> local >>>>>>>>> [ started ] >>>>>>>>> netmount >>>>>>>>> [ started ] >>>>>>>>> smartd >>>>>>>>> [ started ] >>>>>>>>> syslog-ng >>>>>>>>> [ started ] >>>>>>>>> >>>>>>>>> All my network settings are done explicitly by hands or with use of >>>>>>>>> command line dhcp client. There is only one automated network script., >>>>>>>>> which runs dhcp client on any available ethernet interface, which is my >>>>>>>>> eth0 card. >>>>>>>>> >>>>>>>>> emerge -s wpa_supplicant >>>>>>>>> Searching... >>>>>>>>> [ Results for search key : wpa_supplicant ] >>>>>>>>> [ Applications found : 1 ] >>>>>>>>> >>>>>>>>> * net-wireless/wpa_supplicant >>>>>>>>> Latest version available: 0.6.4 >>>>>>>>> Latest version installed: [ Not Installed ] >>>>>>>>> Size of files: 972 kB >>>>>>>>> Homepage: http://hostap.epitest.fi/wpa_supplicant/ >>>>>>>>> Description: IEEE 802.1X/WPA supplicant for secure wireless >>>>>>>>> transfers >>>>>>>>> License: || ( GPL-2 BSD ) >>>>>>>>> >>>>>>>>> No gnome networking software is installed, at least not running for sure. >>>>>>>>> i can send you output of pstree if you like, >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> Yes, send that please. wpa_supplicant is a userspace application, used for >>>>>>>> connecting to WPA / WPA2 networks. It also is also responsible for roaming >>>>>>>> for us in Linux. Network Manager uses it on the GNOME / KDE desktop, and the >>>>>>>> applet on the top right hand side of the desktop that lets you select which >>>>>>>> wireless network to connect to is the "nm-applet". >>>>>>>> >>>>>>>> Luis >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> Sure, if you look carefully into emerge outputs i have send previously - >>>>>>> you will see, that none of those packages are actually installed! >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> Hello Luis. >>>>>> >>>>>> Just wondering is there any update on the problem? Is there anything I >>>>>> can do to help identify problem? >>>>>> >>>>>> >>>>>> >>>> Dmitri, can you provide a tcmpdump (pcap) capture of this? >>>> >>>> Luis >>>> >>>> >>>> >>> Hello Luis, >>> I assume you have misspelled, (i am not familiar with tcmpdump anyway). >>> Please see attachment for step by step log. >>> Let me know what you want me to do next. >>> Regards >>> >>> >> Do you still want me to submit something to kernel.org? >> > > Hm, nah, someone will follow up with you soon, if not just > reply to the thread (not me). > > Luis > Hi guys, any news?