From: Dmitri Seletski <drjoms@gmail.com>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] N mode
Date: Mon, 27 Jul 2009 21:04:45 +0100 [thread overview]
Message-ID: <4A6E085D.5050901@gmail.com> (raw)
In-Reply-To: <eba2f96d0907251037w50803e6ekefe55aa17d8293d4@mail.gmail.com>
Hello Senthilkumar.
I have tried todays archive, no luck again.
While, for example "compat-wireless-2009-04-10" compiles just fine, when
i try to compile "compat-wireless-2009-07-27" or
"compat-wireless-2009-07-24" i get errors.
I do something like:
make clean
make[1]: Entering directory `/usr/src/linux-2.6.30'
CLEAN /home/dimko/compat-wireless-2009-07-27
CLEAN /home/dimko/compat-wireless-2009-07-27/.tmp_versions
make[1]: Leaving directory `/usr/src/linux-2.6.30'
(Than)
make > make.txt 2>&1
Please see attachment, for full details.
It for "compat-wireless-2009-07-24"
Thanks
Senthilkumar Balasubramanian wrote:
> Dmirtri
>
> Sorry! for the delayed reply from our side. We have submitted critical
> bug fixes in the recent times and most of them were merged into
> wireless-testing only recently. I assume you are using a PCI 11n Card
> (not a PCI-E card). Also If i have understood the thread correctly,
> bgn mode shows very low throughput and N mode doesn't connect at all.
>
> Please try the latest wireless-testing and in the mean while, let me
> work on some instrumentation code for you.
>
> Also if possible, please provide us the wireshark packet capture. You
> have to run the following command to create a monitor mode interface
> and capture the frames on "moni0" interface using wireshark when the
> problem happens. Please capture for both bgn and n only modes.
> iw phy phy0 interface add moni0 type monitor
> Please refer to for more information on how to add a monitor mode
> interface using which you can capture wireless frames in wireshark tool.
> http://linuxwireless.org/en/users/Documentation/iw
>
> Thanks
> Senthil
>
> On Sat, Jul 25, 2009 at 6:19 AM, Dmitri Seletski <drjoms@gmail.com
> <mailto:drjoms@gmail.com>> wrote:
>
> Luis R. Rodriguez wrote:
> > On Mon, Jun 15, 2009 at 03:49:29PM -0700, Dmitri Seletski wrote:
> >
> >> Dmitri Seletski wrote:
> >>
> >>> Luis R. Rodriguez wrote:
> >>>
> >>>
> >>>> On Mon, Jun 15, 2009 at 09:01:44AM -0700, Luis Rodriguez wrote:
> >>>>
> >>>>
> >>>>
> >>>>> On Sat, Jun 13, 2009 at 05:35:24PM -0700, Dmitri Seletski wrote:
> >>>>>
> >>>>>
> >>>>>
> >>>>>> Dmitri Seletski wrote:
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>> On Tue, Jun 09, 2009 at 02:59:23PM -0700, Dmitri Seletski
> wrote:
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>> On Tue, Jun 09, 2009 at 08:56:01AM -0700, Dmitri
> Seletski wrote:
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>> Dmitri Seletski wrote:
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>> On Mon, May 18, 2009 at 4:59 PM, Luis R. Rodriguez
> >>>>>>>>>>>>> <lrodriguez@atheros.com
> <mailto:lrodriguez@atheros.com>> wrote:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>> On Mon, May 18, 2009 at 04:34:49PM -0700, Dmitri
> Seletski wrote:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Luis R. Rodriguez wrote:
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> On Mon, May 18, 2009 at 4:09 PM, Dmitri Seletski
> <drjoms at gmail.com <mailto:drjoms@gmail.com>> wrote:
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> compat-wireless-2009-05-19 # grep
> CONFIG_MAC80211_DEFAULT_PS config.mk <http://config.mk>
> >>>>>>>>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS=n
> >>>>>>>>>>>>>>>>> CONFIG_MAC80211_DEFAULT_PS_VALUE=1
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> make :)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> make unload
> >>>>>>>>>>>>>>>>> make install
> >>>>>>>>>>>>>>>>> modprobe ath9k
> >>>>>>>>>>>>>>>>> ip link set wlan0 up
> >>>>>>>>>>>>>>>>> iwconfig wlan0 essid dlink
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> last (IMHO)relevan't dmesg messages(got loads of
> dmesg history today)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14147.633677] phy0: Atheros AR5416 MAC/BB Rev:2
> AR2133 RF Rev:81:
> >>>>>>>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
> >>>>>>>>>>>>>>>>> [14182.582492] ADDRCONF(NETDEV_UP): wlan0: link
> is not ready
> >>>>>>>>>>>>>>>>> [14216.110829] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 1
> >>>>>>>>>>>>>>>>> [14216.310267] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 2
> >>>>>>>>>>>>>>>>> [14216.316846] wlan0 direct probe responded
> >>>>>>>>>>>>>>>>> [14216.316848] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14216.320962] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14216.320964] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14216.520277] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14216.527099] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> I believe reason 9 is you're AP tells you that
> you are trying to
> >>>>>>>>>>>>>>>> associate to it without first having authenticated.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14217.527273] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 3
> >>>>>>>>>>>>>>>>> [14217.727264] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>>>>>> [14231.356054] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14231.359188] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14231.359191] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14231.367102] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> And we repeat this here.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14232.367277] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 1
> >>>>>>>>>>>>>>>>> [14232.567284] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 2
> >>>>>>>>>>>>>>>>> [14232.570837] wlan0 direct probe responded
> >>>>>>>>>>>>>>>>> [14232.570843] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14232.573250] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14232.573434] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14232.773283] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14232.780130] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> And here.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> [14233.780276] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 3
> >>>>>>>>>>>>>>>>> [14233.784639] wlan0 direct probe responded
> >>>>>>>>>>>>>>>>> [14233.784645] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14233.799082] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14233.799087] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> Access point in N mode only currently.
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> Hm OK.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> Switching to mixture of N, G, B and dmesg throws
> this:
> >>>>>>>>>>>>>>>>> [14233.799087] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>>>>>> [14435.358964] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14435.362920] wlan0: authenticated
> >>>>>>>>>>>>>>>>> [14435.362922] wlan0: associate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>>>>>>> [14435.371750] wlan0: RX AssocResp from
> 00:1e:58:b4:f6:83 (capab=0x421
> >>>>>>>>>>>>>>>>> status=0 aid=1)
> >>>>>>>>>>>>>>>>> [14435.371752] wlan0: associated
> >>>>>>>>>>>>>>>>> [14435.372601] ADDRCONF(NETDEV_CHANGE): wlan0:
> link becomes ready
> >>>>>>>>>>>>>>>>> [14435.839637] wlan0: disassociated (Reason: 8)
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> This is the STA has left. Hm, lets try upgrading
> your supplicant...
> >>>>>>>>>>>>>>>> Can you try upgrading to the latest from git?
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> git://w1.fi/srv/git/hostap.git
> <http://w1.fi/srv/git/hostap.git>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> Luis
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Hello Luis.
> >>>>>>>>>>>>>>> I have no idea what authentication you are talking
> about.
> >>>>>>>>>>>>>>> I am sure that i dont use any authentication.
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>> I'm talking about the 802.11 authentication which
> is always
> >>>>>>>>>>>>>> required prior to association (even when no
> encryption is enabled).
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Can you try a newer wpa_supplicant to see if that
> helps?
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>> That is, use a plaintext supplicant as follows:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> mcgrof at tesla ~ $ cat plaintext.conf
> >>>>>>>>>>>>> ctrl_interface=/var/run/wpa_supplicant
> >>>>>>>>>>>>> ap_scan=1
> >>>>>>>>>>>>> network={
> >>>>>>>>>>>>> key_mgmt=NONE
> >>>>>>>>>>>>> ssid="your-ssid"
> >>>>>>>>>>>>> scan_ssid=1
> >>>>>>>>>>>>> }
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> wpa_supplicant -i wlan0 -c plaintext.conf
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Luis
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>> Hello Luis.
> >>>>>>>>>>>>
> >>>>>>>>>>>> ou man, you scared shi* out of me :)
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> dimko wpa_supplicant # modprobe -r ath9k
> >>>>>>>>>>>> dimko wpa_supplicant # modprobe ath9k debug=0x00000200
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> [19251.514273] wlan0: deauthenticating by local
> choice (reason=3)
> >>>>>>>>>>>> [19251.808278] ath9k 0000:01:07.0: PCI INT A disabled
> >>>>>>>>>>>> [19251.808327] ath9k: Driver unloaded
> >>>>>>>>>>>> [19288.173497] cfg80211: Calling CRDA to update world
> regulatory domain
> >>>>>>>>>>>> [19288.277348] ath9k 0000:01:07.0: PCI INT A ->
> Link[LNKB] -> GSI 19
> >>>>>>>>>>>> (level, low) -> IRQ 19
> >>>>>>>>>>>> [19288.703537] ath9k: Eeprom VER: 14, REV: 2
> >>>>>>>>>>>> [19288.704291] ath: Country alpha2 being used: AM
> >>>>>>>>>>>> [19288.704292] ath: Regpair detected: 0x30
> >>>>>>>>>>>> [19288.704294] ath9k: Rate: 1Mbps, ratecode: 27
> >>>>>>>>>>>> [19288.704295] ath9k: Rate: 2Mbps, ratecode: 26
> >>>>>>>>>>>> [19288.704297] ath9k: Rate: 5Mbps, ratecode: 25
> >>>>>>>>>>>> [19288.704298] ath9k: Rate: 11Mbps, ratecode: 24
> >>>>>>>>>>>> [19288.704299] ath9k: Rate: 6Mbps, ratecode: 11
> >>>>>>>>>>>> [19288.704300] ath9k: Rate: 9Mbps, ratecode: 15
> >>>>>>>>>>>> [19288.704302] ath9k: Rate: 12Mbps, ratecode: 10
> >>>>>>>>>>>> [19288.704303] ath9k: Rate: 18Mbps, ratecode: 14
> >>>>>>>>>>>> [19288.704304] ath9k: Rate: 24Mbps, ratecode: 9
> >>>>>>>>>>>> [19288.704305] ath9k: Rate: 36Mbps, ratecode: 13
> >>>>>>>>>>>> [19288.704306] ath9k: Rate: 48Mbps, ratecode: 8
> >>>>>>>>>>>> [19288.704307] ath9k: Rate: 54Mbps, ratecode: 12
> >>>>>>>>>>>> [19288.704309] ath9k: Rate: 6Mbps, ratecode: 11
> >>>>>>>>>>>> [19288.704310] ath9k: Rate: 9Mbps, ratecode: 15
> >>>>>>>>>>>> [19288.704311] ath9k: Rate: 12Mbps, ratecode: 10
> >>>>>>>>>>>> [19288.704312] ath9k: Rate: 18Mbps, ratecode: 14
> >>>>>>>>>>>> [19288.704313] ath9k: Rate: 24Mbps, ratecode: 9
> >>>>>>>>>>>> [19288.704315] ath9k: Rate: 36Mbps, ratecode: 13
> >>>>>>>>>>>> [19288.704316] ath9k: Rate: 48Mbps, ratecode: 8
> >>>>>>>>>>>> [19288.704317] ath9k: Rate: 54Mbps, ratecode: 12
> >>>>>>>>>>>> [19288.704339] ath9k: tx DMA: 512 buffers 1 desc/buf
> >>>>>>>>>>>> [19288.704379] ath9k: tx DMA map: ffff88009f400000
> (77824) -> 0 (77824)
> >>>>>>>>>>>> [19288.704406] ath9k: beacon DMA: 4 buffers 1 desc/buf
> >>>>>>>>>>>> [19288.704408] ath9k: beacon DMA map:
> ffff88009f577000 (608) -> 0 (608)
> >>>>>>>>>>>> [19288.704410] ath9k: cachelsz 64 rxbufsize 3904
> >>>>>>>>>>>> [19288.704412] ath9k: rx DMA: 512 buffers 1 desc/buf
> >>>>>>>>>>>> [19288.704455] ath9k: rx DMA map: ffff8800ac560000
> (77824) -> 0 (77824)
> >>>>>>>>>>>> [19288.707111] phy0: Selected rate control algorithm
> 'ath9k_rate_control'
> >>>>>>>>>>>> [19288.707656] cfg80211: Calling CRDA for country: AM
> >>>>>>>>>>>> [19288.707680] Registered led device: ath9k-phy0::radio
> >>>>>>>>>>>> [19288.707689] Registered led device: ath9k-phy0::assoc
> >>>>>>>>>>>> [19288.707699] Registered led device: ath9k-phy0::tx
> >>>>>>>>>>>> [19288.707711] Registered led device: ath9k-phy0::rx
> >>>>>>>>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2
> AR2133 RF Rev:81:
> >>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> ip link set wlan0 up
> >>>>>>>>>>>>
> >>>>>>>>>>>> [19365.389282] ath9k: Starting driver with initial
> channel: 2412 MHz
> >>>>>>>>>>>> [19365.393590] ath9k: Attach a VIF of type: 2
> >>>>>>>>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
> >>>>>>>>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
> >>>>>>>>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.404378] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19365.408413] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 102
> >>>>>>>>>>>> [19365.408430] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 15, cw_max: 31, txop: 188
> >>>>>>>>>>>> [19365.408446] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408460] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is
> not ready
> >>>>>>>>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>>
> >>>>>>>>>>>> iwconfig wlan0 essid dlink
> >>>>>>>>>>>> [19288.707716] phy0: Atheros AR5416 MAC/BB Rev:2
> AR2133 RF Rev:81:
> >>>>>>>>>>>> mem=0xffffc200114e0000, irq=19
> >>>>>>>>>>>> [19365.389282] ath9k: Starting driver with initial
> channel: 2412 MHz
> >>>>>>>>>>>> [19365.393590] ath9k: Attach a VIF of type: 2
> >>>>>>>>>>>> [19365.393828] ath9k: BSS Changed PREAMBLE 0
> >>>>>>>>>>>> [19365.394016] ath9k: BSS Changed CTS PROT 0
> >>>>>>>>>>>> [19365.404280] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.404378] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19365.404382] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19365.404485] ath9k: (2412 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19365.408413] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 102
> >>>>>>>>>>>> [19365.408430] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 15, cw_max: 31, txop: 188
> >>>>>>>>>>>> [19365.408446] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408460] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 31, txop: 0
> >>>>>>>>>>>> [19365.408487] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.408514] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19365.410973] ADDRCONF(NETDEV_UP): wlan0: link is
> not ready
> >>>>>>>>>>>> [19365.410990] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19457.759393] ath9k: Set HW RX filter: 0x10
> >>>>>>>>>>>> [19457.789264] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19457.789270] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.789373] ath9k: (2412 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19457.853264] ath9k: Set channel: 2417 MHz
> >>>>>>>>>>>> [19457.853269] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.853363] ath9k: (2412 MHz) -> (2417 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19457.914263] ath9k: Set channel: 2422 MHz
> >>>>>>>>>>>> [19457.914268] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.918980] ath9k: (2417 MHz) -> (2422 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19457.980263] ath9k: Set channel: 2427 MHz
> >>>>>>>>>>>> [19457.980268] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19457.980363] ath9k: (2422 MHz) -> (2427 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.041263] ath9k: Set channel: 2432 MHz
> >>>>>>>>>>>> [19458.041268] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.041363] ath9k: (2427 MHz) -> (2432 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.102264] ath9k: Set channel: 2437 MHz
> >>>>>>>>>>>> [19458.102271] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.102368] ath9k: (2432 MHz) -> (2437 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.163262] ath9k: Set channel: 2442 MHz
> >>>>>>>>>>>> [19458.163267] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.163360] ath9k: (2437 MHz) -> (2442 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.235263] ath9k: Set channel: 2447 MHz
> >>>>>>>>>>>> [19458.235269] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.235450] ath9k: (2442 MHz) -> (2447 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.296257] ath9k: Set channel: 2452 MHz
> >>>>>>>>>>>> [19458.296258] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.296344] ath9k: (2447 MHz) -> (2452 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.357257] ath9k: Set channel: 2457 MHz
> >>>>>>>>>>>> [19458.357258] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.357344] ath9k: (2452 MHz) -> (2457 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.418257] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19458.418258] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.418344] ath9k: (2457 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.479263] ath9k: Set channel: 2467 MHz
> >>>>>>>>>>>> [19458.479267] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.479362] ath9k: (2462 MHz) -> (2467 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.680270] ath9k: Set channel: 2472 MHz
> >>>>>>>>>>>> [19458.680280] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.680381] ath9k: (2467 MHz) -> (2472 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19458.881265] ath9k: Set channel: 2484 MHz
> >>>>>>>>>>>> [19458.881270] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19458.881367] ath9k: (2472 MHz) -> (2484 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19459.082271] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19459.082278] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19459.082452] ath9k: (2484 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19459.084497] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19459.085175] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19459.091031] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19459.091252] ath9k: (2412 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19459.095097] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 3, cw_max: 7, txop: 47
> >>>>>>>>>>>> [19459.095114] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 94
> >>>>>>>>>>>> [19459.095125] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19459.095136] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19459.095272] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19459.099880] wlan0: authenticated
> >>>>>>>>>>>> [19459.099885] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19459.299265] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19459.306086] wlan0: deauthenticated (Reason: 9)
> >>>>>>>>>>>> [19460.306269] wlan0: direct probe to AP
> 00:1e:58:b4:f6:83 try 1
> >>>>>>>>>>>> [19460.316796] wlan0 direct probe responded
> >>>>>>>>>>>> [19460.316801] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19460.319702] wlan0: authenticated
> >>>>>>>>>>>> [19460.319707] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19460.519264] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> this is while ap is in N mode.
> >>>>>>>>>>>>
> >>>>>>>>>>>> This is after i set it mixed NBG:
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> [19460.519264] wlan0: association with AP
> 00:1e:58:b4:f6:83 timed out
> >>>>>>>>>>>> [19601.885667] ath9k: Set HW RX filter: 0x10
> >>>>>>>>>>>> [19601.917026] ath9k: Set channel: 2412 MHz
> >>>>>>>>>>>> [19601.917034] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19601.917192] ath9k: (2462 MHz) -> (2412 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19601.978014] ath9k: Set channel: 2417 MHz
> >>>>>>>>>>>> [19601.978019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19601.978114] ath9k: (2412 MHz) -> (2417 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.039014] ath9k: Set channel: 2422 MHz
> >>>>>>>>>>>> [19602.039018] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.043759] ath9k: (2417 MHz) -> (2422 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.104014] ath9k: Set channel: 2427 MHz
> >>>>>>>>>>>> [19602.104019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.108744] ath9k: (2422 MHz) -> (2427 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.169030] ath9k: Set channel: 2432 MHz
> >>>>>>>>>>>> [19602.169040] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.169144] ath9k: (2427 MHz) -> (2432 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.230009] ath9k: Set channel: 2437 MHz
> >>>>>>>>>>>> [19602.230012] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.230100] ath9k: (2432 MHz) -> (2437 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.291015] ath9k: Set channel: 2442 MHz
> >>>>>>>>>>>> [19602.291019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.291110] ath9k: (2437 MHz) -> (2442 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.352012] ath9k: Set channel: 2447 MHz
> >>>>>>>>>>>> [19602.352016] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.352107] ath9k: (2442 MHz) -> (2447 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.413008] ath9k: Set channel: 2452 MHz
> >>>>>>>>>>>> [19602.413010] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.413097] ath9k: (2447 MHz) -> (2452 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.474007] ath9k: Set channel: 2457 MHz
> >>>>>>>>>>>> [19602.474009] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.474519] ath9k: (2452 MHz) -> (2457 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.535014] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19602.535019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.535115] ath9k: (2457 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.596014] ath9k: Set channel: 2467 MHz
> >>>>>>>>>>>> [19602.596019] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.596115] ath9k: (2462 MHz) -> (2467 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.797021] ath9k: Set channel: 2472 MHz
> >>>>>>>>>>>> [19602.797032] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.797136] ath9k: (2467 MHz) -> (2472 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19602.998018] ath9k: Set channel: 2484 MHz
> >>>>>>>>>>>> [19602.998025] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19602.998124] ath9k: (2472 MHz) -> (2484 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19603.199023] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19603.199031] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19603.199198] ath9k: (2484 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19603.200703] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>> [19603.200723] ath9k: Set channel: 2462 MHz
> >>>>>>>>>>>> [19603.200728] ath9k: tx chmask: 1, rx chmask: 1
> >>>>>>>>>>>> [19603.200893] ath9k: (2462 MHz) -> (2462 MHz),
> chanwidth: 0
> >>>>>>>>>>>> [19603.205188] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 3, cw_max: 7, txop: 47
> >>>>>>>>>>>> [19603.205203] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 94
> >>>>>>>>>>>> [19603.205213] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.205224] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.205364] wlan0: authenticate with AP
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19603.208182] wlan0: authenticated
> >>>>>>>>>>>> [19603.208189] wlan0: associate with AP 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19603.216915] wlan0: RX AssocResp from
> 00:1e:58:b4:f6:83 (capab=0x421
> >>>>>>>>>>>> status=0 aid=1)
> >>>>>>>>>>>> [19603.216920] wlan0: associated
> >>>>>>>>>>>> [19603.216952] ath9k: Choosing rate table for mode: 10
> >>>>>>>>>>>> [19603.217411] ath9k: RC Initialized with
> capabilities: 0x0
> >>>>>>>>>>>> [19603.217420] ath9k: Configure tx [queue/halq]
> [0/3], aifs: 2, cw_min:
> >>>>>>>>>>>> 3, cw_max: 7, txop: 47
> >>>>>>>>>>>> [19603.217437] ath9k: Configure tx [queue/halq]
> [1/2], aifs: 2, cw_min:
> >>>>>>>>>>>> 7, cw_max: 15, txop: 94
> >>>>>>>>>>>> [19603.217451] ath9k: Configure tx [queue/halq]
> [2/1], aifs: 3, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.217466] ath9k: Configure tx [queue/halq]
> [3/0], aifs: 7, cw_min:
> >>>>>>>>>>>> 1023, cw_max: 15, txop: 0
> >>>>>>>>>>>> [19603.217536] ath9k: RX filter 0x0 bssid
> 00:1e:58:b4:f6:83 aid 0x0
> >>>>>>>>>>>> [19603.217541] ath9k: BSS Changed PREAMBLE 1
> >>>>>>>>>>>> [19603.217546] ath9k: BSS Changed ASSOC 1
> >>>>>>>>>>>> [19603.217550] ath9k: Bss Info ASSOC 1, bssid:
> 00:1e:58:b4:f6:83
> >>>>>>>>>>>> [19603.218918] ADDRCONF(NETDEV_CHANGE): wlan0: link
> becomes ready
> >>>>>>>>>>>> [19603.218977] ath9k: Set HW RX filter: 0x0
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> I am off to bed, i live in GMT0(+1) time zone
> >>>>>>>>>>>> Hopefully see ya tomorrow.
> >>>>>>>>>>>> Is there an IRC channel or anything? this is just slow.
> >>>>>>>>>>>> Regards
> >>>>>>>>>>>> Dmitri
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>> Hello Luis.
> >>>>>>>>>>>
> >>>>>>>>>>> I don't mean to rush you, was only wandering, what is
> story with report
> >>>>>>>>>>> i have submitted, any progress on it yet?
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>> So I am working on other items and was hoping someone
> else could tackle this
> >>>>>>>>>> but it seems everyone has been busy with other items as
> well. I'll try to help
> >>>>>>>>>> you with this but I'm as in the dark with this issue as
> you are right now. We'll
> >>>>>>>>>> need to debug futher.
> >>>>>>>>>>
> >>>>>>>>>> Did you see the other thread about a similar issue? It
> seemed the person was
> >>>>>>>>>> running Network Manager (and that spawns it own
> wpa_supplicant).
> >>>>>>>>>>
> >>>>>>>>>> Just to confirm -- are you certain you don't have any
> instance of nm-applet,
> >>>>>>>>>> NetworkManager or a wpa_supplicant running in the
> background?
> >>>>>>>>>>
> >>>>>>>>>> Luis
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>> Hello Luis.
> >>>>>>>>>
> >>>>>>>>> I have no idea what is nm-applet. I am as close to bare
> bones as
> >>>>>>>>> possible. I am using gentoo distribution, it by design
> is not using any
> >>>>>>>>> graphical interfaces. to set up network, you have to set
> it up initially
> >>>>>>>>> manually(using available comands or text editor), it
> doesn't even have
> >>>>>>>>> DHCP client by default!
> >>>>>>>>> typically if what you have mentioned is part of start up
> scripts - i
> >>>>>>>>> would know about it.(since most of them if not installed
> by default -
> >>>>>>>>> are not starting up by default)
> >>>>>>>>>
> >>>>>>>>> emerge -s nm-applet
> >>>>>>>>> Searching...
> >>>>>>>>> [ Results for search key : nm-applet ]
> >>>>>>>>> [ Applications found : 1 ]
> >>>>>>>>>
> >>>>>>>>> * gnome-extra/nm-applet
> >>>>>>>>> Latest version available: 0.6.6
> >>>>>>>>> Latest version installed: [ Not Installed ]
> >>>>>>>>>
> >>>>>>>>> I am not sure what is "wpa_supplicant", since from what
> i understand
> >>>>>>>>> it's not user land executable.
> >>>>>>>>>
> >>>>>>>>> rc-status
> >>>>>>>>> Runlevel: default
> >>>>>>>>> acpid
> >>>>>>>>> [ started ]
> >>>>>>>>> alsasound
> >>>>>>>>> [ started ]
> >>>>>>>>> clamd
> >>>>>>>>> [ started ]
> >>>>>>>>> hald
> >>>>>>>>> [ started ]
> >>>>>>>>> hdparm
> >>>>>>>>> [ started ]
> >>>>>>>>> lm_sensors
> >>>>>>>>> [ started ]
> >>>>>>>>> local
> >>>>>>>>> [ started ]
> >>>>>>>>> netmount
> >>>>>>>>> [ started ]
> >>>>>>>>> smartd
> >>>>>>>>> [ started ]
> >>>>>>>>> syslog-ng
> >>>>>>>>> [ started ]
> >>>>>>>>>
> >>>>>>>>> All my network settings are done explicitly by hands or
> with use of
> >>>>>>>>> command line dhcp client. There is only one automated
> network script.,
> >>>>>>>>> which runs dhcp client on any available ethernet
> interface, which is my
> >>>>>>>>> eth0 card.
> >>>>>>>>>
> >>>>>>>>> emerge -s wpa_supplicant
> >>>>>>>>> Searching...
> >>>>>>>>> [ Results for search key : wpa_supplicant ]
> >>>>>>>>> [ Applications found : 1 ]
> >>>>>>>>>
> >>>>>>>>> * net-wireless/wpa_supplicant
> >>>>>>>>> Latest version available: 0.6.4
> >>>>>>>>> Latest version installed: [ Not Installed ]
> >>>>>>>>> Size of files: 972 kB
> >>>>>>>>> Homepage:
> http://hostap.epitest.fi/wpa_supplicant/
> >>>>>>>>> Description: IEEE 802.1X/WPA supplicant for
> secure wireless
> >>>>>>>>> transfers
> >>>>>>>>> License: || ( GPL-2 BSD )
> >>>>>>>>>
> >>>>>>>>> No gnome networking software is installed, at least not
> running for sure.
> >>>>>>>>> i can send you output of pstree if you like,
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>> Yes, send that please. wpa_supplicant is a userspace
> application, used for
> >>>>>>>> connecting to WPA / WPA2 networks. It also is also
> responsible for roaming
> >>>>>>>> for us in Linux. Network Manager uses it on the GNOME /
> KDE desktop, and the
> >>>>>>>> applet on the top right hand side of the desktop that
> lets you select which
> >>>>>>>> wireless network to connect to is the "nm-applet".
> >>>>>>>>
> >>>>>>>> Luis
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>> Sure, if you look carefully into emerge outputs i have
> send previously -
> >>>>>>> you will see, that none of those packages are actually
> installed!
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>> Hello Luis.
> >>>>>>
> >>>>>> Just wondering is there any update on the problem? Is there
> anything I
> >>>>>> can do to help identify problem?
> >>>>>>
> >>>>>>
> >>>>>>
> >>>> Dmitri, can you provide a tcmpdump (pcap) capture of this?
> >>>>
> >>>> Luis
> >>>>
> >>>>
> >>>>
> >>> Hello Luis,
> >>> I assume you have misspelled, (i am not familiar with tcmpdump
> anyway).
> >>> Please see attachment for step by step log.
> >>> Let me know what you want me to do next.
> >>> Regards
> >>>
> >>>
> >> Do you still want me to submit something to kernel.org
> <http://kernel.org>?
> >>
> >
> > Hm, nah, someone will follow up with you soon, if not just
> > reply to the thread (not me).
> >
> > Luis
> >
> Hi guys, any news?
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org <mailto:ath9k-devel@lists.ath9k.org>
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: make.txt
Url: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20090727/9ad5d65d/attachment-0001.txt
next prev parent reply other threads:[~2009-07-27 20:04 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-16 12:46 [ath9k-devel] N mode Dmitri Seletski
2009-05-16 21:23 ` Dmitri Seletski
2009-05-18 15:33 ` Luis R. Rodriguez
2009-05-18 20:56 ` Dmitri Seletski
2009-05-18 20:57 ` Dmitri Seletski
2009-05-18 21:14 ` Luis R. Rodriguez
2009-05-18 21:33 ` Dmitri Seletski
2009-05-18 22:45 ` Luis R. Rodriguez
2009-05-18 23:09 ` Dmitri Seletski
2009-05-18 23:29 ` Luis R. Rodriguez
2009-05-18 23:34 ` Dmitri Seletski
2009-05-18 23:59 ` Luis R. Rodriguez
2009-05-19 0:10 ` Luis R. Rodriguez
2009-05-19 0:24 ` Luis R. Rodriguez
2009-05-19 0:33 ` Dmitri Seletski
2009-05-19 0:41 ` Luis R. Rodriguez
2009-05-19 18:55 ` Dmitri Seletski
2009-05-26 21:42 ` Luis R. Rodriguez
[not found] ` <4A2E8611.6010401@gmail.com>
[not found] ` <20090609214205.GD12776@tesla>
[not found] ` <4A2EDB3B.9020503@gmail.com>
[not found] ` <20090609220733.GF12776@tesla>
[not found] ` <4A2EDF1E.4000707@gmail.com>
[not found] ` <4A3445CC.7010607@gmail.com>
[not found] ` <20090615160144.GB19674@tesla>
2009-06-15 17:47 ` Luis R. Rodriguez
2009-06-15 20:28 ` Dmitri Seletski
[not found] ` <4A36CFF9.6070506@gmail.com>
[not found] ` <20090616003715.GA5492@tesla>
2009-07-25 0:49 ` Dmitri Seletski
2009-07-25 17:37 ` Senthilkumar Balasubramanian
2009-07-25 18:54 ` Dmitri Seletski
2009-07-27 20:04 ` Dmitri Seletski [this message]
2009-08-05 3:43 ` Dmitri Seletski
2009-08-05 15:34 ` Luis R. Rodriguez
2009-08-05 15:54 ` Dmitri Seletski
2009-08-05 16:34 ` Dmitri Seletski
2009-08-05 17:11 ` Luis R. Rodriguez
2009-08-05 19:51 ` Dmitri Seletski
2009-08-05 20:10 ` Dmitri Seletski
2009-08-05 20:53 ` Luis R. Rodriguez
2009-08-05 20:57 ` Luis R. Rodriguez
2009-08-06 13:53 ` [ath9k-devel] N compile SUSE bnc
2009-08-06 19:42 ` Pavel Roskin
2009-09-15 11:28 ` [ath9k-devel] N mode Dmitri Seletski
2009-05-18 23:36 ` Dmitri Seletski
2009-05-18 21:09 ` Luis R. Rodriguez
2009-05-18 21:17 ` Dmitri Seletski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A6E085D.5050901@gmail.com \
--to=drjoms@gmail.com \
--cc=ath9k-devel@lists.ath9k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.