From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Sune_M=F8lgaard?= Subject: Re: Master channel is only mono Date: Wed, 29 Jul 2009 18:12:27 +0200 Message-ID: <4A7074EB.3070908@molgaard.org> References: <4A7066BF.9000603@molgaard.org> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: Received: from smtp.nfit.au.dk (nfitmail.nfit.au.dk [130.225.31.129]) by alsa0.perex.cz (Postfix) with ESMTP id F0BF6103895 for ; Wed, 29 Jul 2009 18:12:35 +0200 (CEST) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Takashi Iwai Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org Takashi Iwai wrote: > At Wed, 29 Jul 2009 17:11:59 +0200, > Sune M=F8lgaard wrote: >> >> As per gnubien's advice on #alsa on irc.freenode.net, I have run >> alsa-info.sh - the URL is >> http://www.alsa-project.org/db/?f=3Dfbe93f301ca214007e66c521cd6c41a17a60= 4c79 . > > Better to run alsa-info.sh with --no-upload and attach it instead > of URL. Sorry about that. I was instructed otherwise... >> My problem is that the master channel for my card is shown to be mono >> only, which I don't think seems right... > > Mono is correct. > You have other mixer elements for left/right volume balance. Could you recommend to me a mixer program that can access them, then? = alsamixer only shows Master, Headphone, Headphone 1, PCM, Digital Input = Source [Digital Mic 1], Digital Input Source 1 [Analog Inputs] and Speaker. Same goes for the gnome mixer with all inputs selected... >> Also, sound in general is rather low. > > I guess you didn't raise headphone and speaker volumes. Nope, Master, Speaker, and PCM are at max. > > HTH, > > Takashi Thank you for your input, but it would seem that I still need some advice... Best regards, Sune