From: Robert Hancock <hancockrwd@gmail.com>
To: Allan Wind <allan_wind@lifeintegrity.com>
Cc: linux-ide@vger.kernel.org
Subject: Re: LSISAS1068E + WDC WD2002FYPS: I/O error & Sense Key
Date: Wed, 29 Jul 2009 13:43:06 -0600 [thread overview]
Message-ID: <4A70A64A.2070605@gmail.com> (raw)
In-Reply-To: <20090727060322.GB27002@lifeintegrity.com>
On 07/27/2009 12:03 AM, Allan Wind wrote:
> I have a pair of Western Digital RE4-GP (WD2002FYPS) in RAID1 configuration
> using Linux 2.6.30.3 and seeing the following:
>
> [ 4907.485324] end_request: I/O error, dev sdb, sector 3907028974
Are there no error messages before this point? Can you post the full
dmesg output from bootup?
> [ 4907.485543] md: super_written gets error=-5, uptodate=0
> [ 4907.485546] raid1: Disk failure on sdb2, disabling device.
> [ 4907.485547] raid1: Operation continuing on 1 devices.
> [ 4907.499157] RAID1 conf printout:
> [ 4907.499159] --- wd:1 rd:2
> [ 4907.499162] disk 0, wo:0, o:1, dev:sda2
> [ 4907.499164] disk 1, wo:1, o:0, dev:sdb2
> [ 4907.503037] RAID1 conf printout:
> [ 4907.503039] --- wd:1 rd:2
> [ 4907.503041] disk 0, wo:0, o:1, dev:sda2
> [ 6705.292961] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 6705.292967] Descriptor sense data with sense descriptors (in hex):
> [ 6705.292970] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6705.292978] 00 4f 00 c2 00 50
> [ 6705.292983] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 6705.359497] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 6705.359502] Descriptor sense data with sense descriptors (in hex):
> [ 6705.359504] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6705.359513] 00 4f 00 c2 00 50
> [ 6705.359517] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 6724.022616] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 6724.022622] Descriptor sense data with sense descriptors (in hex):
> [ 6724.022624] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6724.022633] 00 4f 00 c2 00 50
> [ 6724.022638] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 6724.078063] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 6724.078068] Descriptor sense data with sense descriptors (in hex):
> [ 6724.078070] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6724.078079] 00 4f 00 c2 00 50
> [ 6724.078083] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 6740.035419] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 6740.035425] Descriptor sense data with sense descriptors (in hex):
> [ 6740.035427] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6740.035435] 00 4f 00 c2 00 50
> [ 6740.035440] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 6740.090867] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 6740.090872] Descriptor sense data with sense descriptors (in hex):
> [ 6740.090874] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6740.090882] 00 4f 00 c2 00 50
> [ 6740.090887] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 6812.955958] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
> [ 6812.955965] Descriptor sense data with sense descriptors (in hex):
> [ 6812.955967] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6812.955976] 00 4f 00 c2 00 50
> [ 6812.955980] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
> [ 6813.011403] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
> [ 6813.011408] Descriptor sense data with sense descriptors (in hex):
> [ 6813.011410] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6813.011419] 00 4f 00 c2 00 50
> [ 6813.011423] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
> [ 6818.944137] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
> [ 6818.944143] Descriptor sense data with sense descriptors (in hex):
> [ 6818.944146] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6818.944154] 00 4f 00 c2 00 50
> [ 6818.944159] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
> [ 6818.999583] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
> [ 6818.999587] Descriptor sense data with sense descriptors (in hex):
> [ 6818.999590] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 6818.999598] 00 4f 00 c2 00 50
> [ 6818.999602] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
> [ 7036.061540] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 7036.061547] Descriptor sense data with sense descriptors (in hex):
> [ 7036.061549] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 7036.061558] 00 4f 00 c2 00 50
> [ 7036.061562] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 7036.116986] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 7036.116991] Descriptor sense data with sense descriptors (in hex):
> [ 7036.116993] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 7036.117001] 00 4f 00 c2 00 50
> [ 7036.117006] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 7042.247767] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
> [ 7042.247773] Descriptor sense data with sense descriptors (in hex):
> [ 7042.247776] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 7042.247784] 00 4f 00 c2 00 50
> [ 7042.247789] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
> [ 7042.303215] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
> [ 7042.303219] Descriptor sense data with sense descriptors (in hex):
> [ 7042.303221] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 7042.303230] 00 4f 00 c2 00 50
> [ 7042.303234] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
> [ 7048.136156] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
> [ 7048.136162] Descriptor sense data with sense descriptors (in hex):
> [ 7048.136165] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 7048.136174] 00 4f 00 c2 00 50
> [ 7048.136178] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
> [ 7048.191599] sd 4:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor]
> [ 7048.191604] Descriptor sense data with sense descriptors (in hex):
> [ 7048.191606] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 7048.191614] 00 4f 00 c2 00 50
> [ 7048.191619] sd 4:0:0:0: [sda] Add. Sense: ATA pass through information available
> [ 7051.153936] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 7051.153942] Descriptor sense data with sense descriptors (in hex):
> [ 7051.153944] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 7051.153953] 00 4f 00 c2 00 50
> [ 7051.153958] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
> [ 7051.209384] sd 4:0:1:0: [sdb] Sense Key : Recovered Error [current] [descriptor]
> [ 7051.209388] Descriptor sense data with sense descriptors (in hex):
> [ 7051.209390] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [ 7051.209399] 00 4f 00 c2 00 50
> [ 7051.209403] sd 4:0:1:0: [sdb] Add. Sense: ATA pass through information available
>
> SMART suggest the drives are fine:
>
> pawan:/var/log# smartctl -l error /dev/sda
> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> === START OF READ SMART DATA SECTION ===
> SMART Error Log Version: 1
> No Errors Logged
>
> pawan:/var/log# smartctl -l error /dev/sdb
> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> === START OF READ SMART DATA SECTION ===
> SMART Error Log Version: 1
> No Errors Logged
>
> I disabled NCQ per instructions at:
> http://linux-ata.org/faq.html#ncq
> Btw, is there a better way than writing a init.d script for tweaking NCQ at
> reboot?
>
> Any ideas?
>
>
> /Allan
next prev parent reply other threads:[~2009-07-29 19:49 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-27 6:03 LSISAS1068E + WDC WD2002FYPS: I/O error & Sense Key Allan Wind
2009-07-29 19:43 ` Robert Hancock [this message]
2009-07-29 20:07 ` Allan Wind
2009-07-29 23:04 ` Robert Hancock
2009-07-31 18:40 ` Allan Wind
2009-08-03 5:08 ` Allan Wind
2009-08-03 14:34 ` James Bottomley
2009-08-03 16:06 ` Allan Wind
2009-08-03 16:15 ` James Bottomley
2009-08-26 21:17 ` Allan Wind
2009-09-11 6:20 ` Jeppe Oland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A70A64A.2070605@gmail.com \
--to=hancockrwd@gmail.com \
--cc=allan_wind@lifeintegrity.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.