From: Heiko Schocher <hs@denx.de>
To: linuxppc-dev@ozlabs.org
Cc: david@gibson.dropbear.id.au
Subject: [PATCH v2 1/2] 82xx, mgcoge: updates for 2.6.32
Date: Mon, 03 Aug 2009 09:34:50 +0200 [thread overview]
Message-ID: <4A76931A.6@denx.de> (raw)
In-Reply-To: <20090729103203.GA6369@yookeroo.seuss>
[PATCH v2 1/2] 82xx, mgcoge: updates for 2.6.32
- add I2C support
- add FCC1 and FCC2 support
- fix bogus gpio numbering in plattformcode
Signed-off-by: Heiko Schocher <hs@denx.de>
---
- against git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
next branch
- checked with checkpatch.pl:
$ ./scripts/checkpatch.pl 0001-82xx-mgcoge-updates-for-2.6.32.patch
total: 0 errors, 0 warnings, 147 lines checked
0001-82xx-mgcoge-updates-for-2.6.32.patch has no obvious style problems and is ready for submission.
$
- changes since v1
- Add comments from David Gibson
removed 2 "device_type" entries
- Add comment from Kumar Gala
splittet into 2 patches (seperated defconfig patch)
arch/powerpc/boot/dts/mgcoge.dts | 53 ++++++++++++++++++++++++++
arch/powerpc/platforms/82xx/mgcoge.c | 69 +++++++++++++++++++++++++++++----
2 files changed, 113 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts
index 633255a..0ce9664 100644
--- a/arch/powerpc/boot/dts/mgcoge.dts
+++ b/arch/powerpc/boot/dts/mgcoge.dts
@@ -162,6 +162,59 @@
fixed-link = <0 0 10 0 0>;
};
+ i2c@11860 {
+ compatible = "fsl,mpc8272-i2c",
+ "fsl,cpm2-i2c";
+ reg = <0x11860 0x20 0x8afc 0x2>;
+ interrupts = <1 8>;
+ interrupt-parent = <&PIC>;
+ fsl,cpm-command = <0x29600000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio@10d40 {
+ compatible = "fsl,cpm2-mdio-bitbang";
+ reg = <0x10d00 0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fsl,mdio-pin = <12>;
+ fsl,mdc-pin = <13>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ };
+
+ /* FCC1 management to switch */
+ ethernet@11300 {
+ device_type = "network";
+ compatible = "fsl,cpm2-fcc-enet";
+ reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
+ local-mac-address = [ 00 01 02 03 04 07 ];
+ interrupts = <32 8>;
+ interrupt-parent = <&PIC>;
+ phy-handle = <&phy0>;
+ linux,network-index = <1>;
+ fsl,cpm-command = <0x12000300>;
+ };
+
+ /* FCC2 to redundant core unit over backplane */
+ ethernet@11320 {
+ device_type = "network";
+ compatible = "fsl,cpm2-fcc-enet";
+ reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
+ local-mac-address = [ 00 01 02 03 04 08 ];
+ interrupts = <33 8>;
+ interrupt-parent = <&PIC>;
+ phy-handle = <&phy1>;
+ linux,network-index = <2>;
+ fsl,cpm-command = <0x16200300>;
+ };
};
PIC: interrupt-controller@10c00 {
diff --git a/arch/powerpc/platforms/82xx/mgcoge.c b/arch/powerpc/platforms/82xx/mgcoge.c
index c2af169..7a5de9e 100644
--- a/arch/powerpc/platforms/82xx/mgcoge.c
+++ b/arch/powerpc/platforms/82xx/mgcoge.c
@@ -50,16 +50,63 @@ struct cpm_pin {
static __initdata struct cpm_pin mgcoge_pins[] = {
/* SMC2 */
- {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
/* SCC4 */
- {3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {3, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {3, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {3, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {4, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {4, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {2, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {3, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {3, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+ /* FCC1 */
+ {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+
+ {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* FCC2 */
+ {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+ {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* MDC */
+ {0, 13, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+
+#if defined(CONFIG_I2C_CPM)
+ /* I2C */
+ {3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+ {3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+#endif
};
static void __init init_ioports(void)
@@ -68,12 +115,16 @@ static void __init init_ioports(void)
for (i = 0; i < ARRAY_SIZE(mgcoge_pins); i++) {
const struct cpm_pin *pin = &mgcoge_pins[i];
- cpm2_set_pin(pin->port - 1, pin->pin, pin->flags);
+ cpm2_set_pin(pin->port, pin->pin, pin->flags);
}
cpm2_smc_clk_setup(CPM_CLK_SMC2, CPM_BRG8);
cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK7, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK8, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
}
static void __init mgcoge_setup_arch(void)
--
1.6.0.6
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2009-08-03 7:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-29 8:32 82xx, mgcoge: updates for 2.6.32 Heiko Schocher
2009-07-29 10:32 ` David Gibson
2009-07-30 5:29 ` Heiko Schocher
2009-08-03 7:34 ` Heiko Schocher [this message]
2009-08-07 2:31 ` [PATCH v2 1/2] " Kumar Gala
2009-07-29 13:40 ` Kumar Gala
2009-07-30 5:31 ` Heiko Schocher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A76931A.6@denx.de \
--to=hs@denx.de \
--cc=david@gibson.dropbear.id.au \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.