All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Lord <liml@rtr.ca>
To: "Davíð Steinn Geirsson" <david@dsg.to>
Cc: linux-ide@vger.kernel.org
Subject: Re: HighPoint RocketRAID 2320
Date: Mon, 03 Aug 2009 18:53:52 -0400	[thread overview]
Message-ID: <4A776A80.5090409@rtr.ca> (raw)
In-Reply-To: <4A776A03.90705@rtr.ca>

Mark Lord wrote:
> Mark Lord wrote:
>> Davíð Steinn Geirsson wrote:
>>> Hi all,
>>>
>>> I'm throwing this out here in the hopes that someone smarter than me has
>>> a simple solution - never hurts to be optimistic. :)
>>>
>>> I have a HighPoint controller, RocketRAID 2320 (8-port PCIe SATA 
>>> fakeraid). It is only supported by an ugly binary blob deceptively 
>>> labeled as an "open source driver" from HighPoint (rr232x). Looking 
>>> at the wrapper around the blob, it seems this driver claims only the 
>>> 2320 and 2322 controllers:
>>>
>>> static const struct pci_device_id hpt_pci_tbl[] = {
>>>         {PCI_DEVICE(0x1103, 0x2320), 0, 0, 0},
>>>         {PCI_DEVICE(0x1103, 0x2322), 0, 0, 0},
>>>         {}
>>> };
>>>
>>> I've found that this controller contains a marvell 88SX6081 chip, which
>>> should be supported by the sata_mv driver. That driver claims device IDs
>>> 2300 and 2310:
>>>         { PCI_VDEVICE(TTI, 0x2300), chip_7042 },
>>>         { PCI_VDEVICE(TTI, 0x2310), chip_7042 },
>>>
>>> So, ever hopeful, I tried adding the 2320 into the table:
>>>         { PCI_VDEVICE(TTI, 0x2320), chip_608x },
>>>
>>> When I do this, the kernel successfully probes the attached disks and
>>> their capacity, but immediately errors out and starts resetting the
>>> ports repeatedly.
>> ..
>>
>> Send me a clear, in-focus detailed photograph of the board,
>> showing the chip markings very clearly.
> ..
> 
> Never mind -- found one here:
> http://www.taipeitradeshows.com.tw/downloads/2007051104030512475/RR2320.jpg
> 
> The SATA chip is clearly a 88SX6091-8CZ, which is a PCIX 8-port controller.
                             ^^^^^^^^
That was supposed to say 88SX6081 there.  :)
 
> Since it is sitting on a PCIe card, one must assume there's a PCIe-to-PCIX
> bridge hidden under that huge heatsink.
> 
> So if the card does not work in the chip_608x mode,
> there's probably some funny business in that bridge chip.
> 
> Maybe it works *only* in the proprietary RAID mode (?)
> 
> Cheers
> -- 
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


  reply	other threads:[~2009-08-03 22:53 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-03 20:18 HighPoint RocketRAID 2320 Davíð Steinn Geirsson
2009-08-03 20:31 ` Davíð Steinn Geirsson
2009-08-04 11:55   ` Tejun Heo
2009-08-04 17:48     ` Davíð Steinn Geirsson
2009-08-05  3:36       ` Mark Lord
2009-08-05  3:44         ` Mark Lord
2009-08-05  3:58           ` Tejun Heo
2009-08-05 21:01             ` Davíð Steinn Geirsson
2009-08-05 22:35               ` Mark Lord
2009-08-05 22:40               ` Mark Lord
2009-08-05 22:41                 ` Mark Lord
2009-08-03 22:29 ` Mark Lord
2009-08-03 22:51   ` Mark Lord
2009-08-03 22:53     ` Mark Lord [this message]
2009-08-03 23:35       ` Davíð Steinn Geirsson
2009-08-04  1:50         ` Mark Lord
2009-08-04 17:51           ` Davíð Steinn Geirsson
2009-08-03 23:20     ` Ben Dooks

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4A776A80.5090409@rtr.ca \
    --to=liml@rtr.ca \
    --cc=david@dsg.to \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.